+ Reply to Thread
Results 1 to 4 of 4

Thread: Another Inglis MK1* example......2T plus some info on Z.L.&T. Ltd.

Click here to increase the font size Click here to reduce the font size
  1. #1
    Member 6167's Avatar
    Join Date
    Dec 2007
    Last On
    Today @ 10:52 AM
    Location
    SWO
    Posts
    17
    Local Date
    12-18-2018
    Local Time
    01:52 PM

    Another Inglis MK1* example......2T plus some info on Z.L.&T. Ltd.

    I picked up this 2T Inglis MK1* from a fellow collector along with the correct earlier pattern holster. (for late 44, early 45 in-theatre use)

    Kind of cool that Z.L.&T.Ltd was in my Town.....Guelph, Ontario.

    Zephyr Loom and Textiles Company Limited was also know over the years as Zephyr Mills, Hammil Brothers, and HH Burrows Company.

    I have attached a shot of a front gate pass badge and a shot of one of the 4 plants in Guelph about 1940, backing on to the Speed River where it meets the Eramosa river in Downtown Guelph. Apparently the 4 facilities employed about 1200 workers during the war. Another one of the larger plants was located at 72 Farquhar Street.

    Lots of Textile Mills in the Guelph/Galt-Cambridge/Hespeler/and Kitchener areas of Southern Ontario due to plenty of rivers that were not navigable but produced Industrial Plant power. Have a look at the pics of the 2T....It's very clean, but a bit greasy inside, shows some holster wear, and has a very nice barrel. Cheers Paul


    Last edited by 6167; 11-15-2018 at 04:24 PM.

  2. The Following 3 Members Say Thank You to 6167 For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    No Drill-Tap scope mounts for Mosin Nagant, Mauser K98K, Yugo M48, Swedish M96 and M38, Swiss K31, K11, 1911 and more! Bringing mil-surplus rifles to modern standard without damaging historical values! We specialise in military utensils and artefacts such as helmets, daggers, medals and badges, etc.  The on-line store is intended for personal browsing and searching of collecting objects. All items are provided historical value only and can be used for home collection or other purposes except of fascism, Nazism or other extremism manifestation or its propaganda. LIMITED TIME OFFER FROM THE AMERICAN GUNSMITHING INSTITUTE: Get Immediate Online Access To AGI's NEW Armorer's Course for Glock Pistols, Covering Every Generation of Glocks, Including the Latest Model 42/43 and Double Stack Pistols for ONLY $7.00! Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles We pride ourselves on being the new lowest price listing service, and the simplest to use. If you need to buy or sell collectible firearms or any firearm in your legal possession, then this is the place for you. If you’re a big collector clearing house, or other seller that could benefit from a Premium seller account, then we can also support you here at Armory.Auctions LLC. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 11:59 AM
    Location
    Victoria BC
    Posts
    20,869
    Local Date
    12-18-2018
    Local Time
    10:52 AM
    Nice mint example of Hi-Power. I've had all those various holsters and though they may be protective, I can't help but think how abrasive they are to the pistol's finish with the in-and-out of every day. They're hard as a cob and unforgiving. I used one of the two flap holsters for a bit in service myself because the issued pattern 64 isn't much of a going concern. I was #2 on a C4 MG so it was my personal weapon and would have been frowned upon if it went adrift...and I hated the lanyards.
    Regards, Jim

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Member 6167's Avatar
    Join Date
    Dec 2007
    Last On
    Today @ 10:52 AM
    Location
    SWO
    Posts
    17
    Local Date
    12-18-2018
    Local Time
    01:52 PM
    Thread Starter
    Yes... Thanks, it's a very nice Inglis example.
    I can't imagine how long one of those holsters would take to dry if it got soaked!! The pistol would probably end up very crusty before it got close to being dry.
    I also found the '64 pattern holster a bit of a dud.
    The idea of an HP in your front chest pouches is brilliant like the lads are doing now, or a good drop leg.
    Apparently this first issue 37 pattern in my pics held the pistol way too tight and just about every pic in the field shows them with the flap folded back in to the belt and the lanyard available to tug the piece out if needed.
    I wasn't given an Inglis very often for Air Ops, making up for it now!

  7. Thank You to 6167 For This Useful Post:


  8. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 11:59 AM
    Location
    Victoria BC
    Posts
    20,869
    Local Date
    12-18-2018
    Local Time
    10:52 AM
    Quote Originally Posted by 6167 View Post
    this first issue 37 pattern in my pics held the pistol way too tight
    They shrunk after being soaked and of course to dry it was put to heat...

    Quote Originally Posted by 6167 View Post
    I also found the '64 pattern holster a bit of a dud.
    The one immediately preceding it was too, canvas twill and belt hooks. It was actually worse. I saw a Korea vet carrying his with the lanyard tied around the whole affair to retain it. I don't think on the chest is as good as a leg rig. Done them both and when doing fire and movement, the up front thing puts it into everything you're crawling through. The leg rig put them at the natural position of the hand.



    Quote Originally Posted by 6167 View Post
    I can't imagine how long one of those holsters would take to dry if it got soaked
    As long as you had. Mine needed tending and oiling daily to avoid rust. Fortunately it was warm weather.
    Regards, Jim

+ Reply to Thread

Similar Threads

  1. Inglis No1 HP pistol
    By Brit plumber in forum Other Military Service Pistols and Revolvers
    Replies: 26
    Last Post: 11-08-2018, 01:02 PM
  2. 5T Inglis
    By Tom E Gun in forum Other Military Service Pistols and Revolvers
    Replies: 9
    Last Post: 09-18-2014, 10:30 AM
  3. Looking for Inglis P35 HP internal punch mark info.
    By zparqi in forum Other Military Service Pistols and Revolvers
    Replies: 7
    Last Post: 01-07-2013, 11:40 AM
  4. Inglis Hi Power - VALUE Help....
    By Nickjc in forum Other Military Service Pistols and Revolvers
    Replies: 11
    Last Post: 10-25-2011, 11:18 PM
  5. $5,000.00 Inglis HP ???!!!
    By Pete04 in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 8
    Last Post: 07-12-2007, 07:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts