+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 26

Thread: Considering joining the club...

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member 82Trooper's Avatar
    Join Date
    Jan 2018
    Last On
    Yesterday @ 06:38 PM
    Location
    Monroeville, Pennsylvania USA
    Posts
    194
    Real Name
    Mike Rakow
    Local Date
    03-28-2024
    Local Time
    06:26 AM

    Considering joining the club...

    Hello all.....I am a relative newcomer here, but have the "bug"...
    I am considering purchasing a Martini-Henry from IMA...

    This is what I am considering:
    https://www.ima-usa.com/collections/...d-and-complete

    The thought of holding a piece of history in my hands is very appealing....the fact that it "could" have been at Rorke's Drift is almost irresistible...Anything I should look for as extra appealing or to stay away from?

    Also, are these for real? Assuming a qualified smith gives the go-ahead to actually shoot the piece....
    martini 577-450 to 45lc chamber adapter steel - Other Gun Accessories Parts at GunBroker.com : 792857156

    As always...thanks for the advice I would not likely trust to ask for anywhere else.
    Mike
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    "Audacia....By daring deed"

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    03:26 AM
    Quote Originally Posted by 82Trooper View Post
    are these for real?
    Yes and that sort of thing helps when the rifle may not be up to shooting a full house load. Also cheaper than buying brass and dies and bullets...and learning to paper patch... Well, I did it anyway.
    Regards, Jim

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member 82Trooper's Avatar
    Join Date
    Jan 2018
    Last On
    Yesterday @ 06:38 PM
    Location
    Monroeville, Pennsylvania USA
    Posts
    194
    Real Name
    Mike Rakow
    Local Date
    03-28-2024
    Local Time
    06:26 AM
    Thread Starter
    So I would assume finding a "local" Martini-Henry is unlikely.....how does one find someone competent to determine if a 140 year old rifle is safe to shoot? What even do they look for, other than the obvious cracks or defects? Does a headspace gauge even exist in this caliber?
    Again, thanks in advance for any advice.
    Mike
    "Audacia....By daring deed"

  6. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    03:26 AM
    Quote Originally Posted by 82Trooper View Post
    how does one find someone competent to determine if a 140 year old rifle is safe to shoot? What even do they look for, other than the obvious cracks or defects?
    That's about it, it turns into an opinion by someone with a licence to do just that very thing. If he specializes in military and antique it might be more to the point. I'd do it myself though, fit and finish, condition being everything. The sub cal would be far easier on the action anyway. I'm sure someone here can point you to someone that can provide headspace gauges...
    Regards, Jim

  7. #5
    Contributing Member 303 Gunner's Avatar
    Join Date
    Dec 2018
    Last On
    03-24-2024 @ 09:20 PM
    Location
    Maine, United States
    Age
    34
    Posts
    181
    Real Name
    Joshua
    Local Date
    03-28-2024
    Local Time
    06:26 AM
    If you're more interested in the action and rifle itself and not so much the caliber, you could also look to pick up one of the W.W. Greener .22 conversions from the early 1900s. I have one and it's a joy to shoot and absolutely gorgeous to boot.

  8. #6
    Legacy Member 82Trooper's Avatar
    Join Date
    Jan 2018
    Last On
    Yesterday @ 06:38 PM
    Location
    Monroeville, Pennsylvania USA
    Posts
    194
    Real Name
    Mike Rakow
    Local Date
    03-28-2024
    Local Time
    06:26 AM
    Thread Starter
    all right...you guys are talking me into this.....

    as for the adapter...brass or steel preferred?
    Last edited by 82Trooper; 12-08-2018 at 01:30 PM.
    "Audacia....By daring deed"

  9. #7
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    03:26 AM
    Steel adaptors...brass is soft and can damage or stretch over time.
    Regards, Jim

  10. #8
    Legacy Member 82Trooper's Avatar
    Join Date
    Jan 2018
    Last On
    Yesterday @ 06:38 PM
    Location
    Monroeville, Pennsylvania USA
    Posts
    194
    Real Name
    Mike Rakow
    Local Date
    03-28-2024
    Local Time
    06:26 AM
    Thread Starter
    I like the idea of the adapter to .45LC .....still some bang, but at a much more reasonable price point. Original caliber ammo seems awful expensive, if you can find it...and I really do nt have the desire to hand load.
    I will also look for the referenced .22 adapter...that's a cool idea, too. Are they available, in general? Are they affordable?
    "Audacia....By daring deed"

  11. #9
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    03:26 AM
    Quote Originally Posted by 82Trooper View Post
    the referenced .22 adapter
    Not so much available and a collector's piece. I'd turn one myself using an old .22 rifle barrel...the back end would need an offset firing cap to fire the rimfire cartridge. Picture a piece that goes in behind the cartridge and has a nib on one edge. Then it all gets pushed out with a rod after firing. The barrel would be long...full length if I could manage. The chamber insert in .45 would be easier. Guess you could make a .22 insert about 12" long too...longer for accuracy. Barrels were also lined you know...I'd do one for a laugh in a common caliber like .30-30... Then it's centerfire and lower pressure. Still you'd want a good one for that, not one that came from the basement armory of the palace in Afghanistan...covered in Bat Guano.
    Regards, Jim

  12. #10
    Legacy Member jamie5070's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 09:57 PM
    Location
    tucson, arizona
    Posts
    548
    Local Date
    03-28-2024
    Local Time
    05:26 AM
    The MK IVs generally are in better condition than the MK IIs. There is a man over on the britishmilita website that sells brass formed from magtech brass shotgun shells that are much cheaper than regular brass.
    Reloading is really easy. I use 45-70 bullets and .470 ruger pistol die to neck size the cases. If you order one, I would state that you are wanting to shoot it just in case there is a questionable barrel on it. My MK IV had a mint bore and minimal pitting on the outside below the wood line. My MK II has a shootable bore and deeper pitting under the wood. All of the guns from the Nepal cache are a lot of fun to clean and shoot.
    john

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. The Carbine Club
    By Harlan (Deceased) in forum M1/M2 Carbine
    Replies: 11
    Last Post: 03-18-2016, 03:29 PM
  2. joining 2 halves of a hollow musket ball how any one ?
    By masterclint in forum Ammunition and Reloading for Old Milsurps
    Replies: 3
    Last Post: 06-14-2014, 05:56 PM
  3. carbine club
    By phillydude in forum M1/M2 Carbine
    Replies: 7
    Last Post: 01-12-2011, 03:46 PM
  4. Thanks from the Carbine Club
    By Hooks in forum M1/M2 Carbine
    Replies: 30
    Last Post: 10-12-2009, 06:43 AM
  5. I'm in the club!
    By Bayou in forum M1 Garand/M14/M1A Rifles
    Replies: 18
    Last Post: 03-19-2009, 12:28 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks