+ Reply to Thread
Results 1 to 6 of 6

Thread: MKII with MKIII sight? Plus unit marking questions!

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member GlennP's Avatar
    Join Date
    Aug 2017
    Last On
    02-25-2021 @ 02:53 PM
    Location
    NJ, USA
    Posts
    18
    Local Date
    03-28-2024
    Local Time
    08:14 AM

    MKII with MKIII sight? Plus unit marking questions!

    I've been searching for a Ross MKII with stock markings that are decipherable as I love the provenance one can collect. So, I've been looking for a complete military MKII in decent shape but with nice stock markings that have a cool story.

    I found what I believe to be something "neat". From my research, I found a Royal Canadianicon Ordnance Corps rifle from a Training Center. This would have occurred sometime after 1919, since before 1919 it was simply the Canadian Ordnance Corps (COC, not RCOC)

    I've requested a more clear photo, but it seems it passed through three other battalions before it landed at the RCOC-TC, but the only legible one really is the "102". Is this the 102nd Battalion (Northern Britishicon Columbia)? It doesn't jive with what appears to be "CC" after the 102, though.

    Also, the rifle appears to have a MKIII sight. Is this good, bad, indifferent? Was this a post-WWI modification for training, or bubba?

    The photos kind of suck and I am requesting the missing info from the seller, namely a photo that shows the condition of the front of the gun and the bore. It is pricey but the stock markings are really cool and it seems in nice shape.

    Model 1905 Canadian Ross - Curios Relics at GunBroker.com : 795964541
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member boltaction's Avatar
    Join Date
    Dec 2006
    Last On
    10-02-2023 @ 12:21 PM
    Location
    BC Interior
    Posts
    642
    Local Date
    03-28-2024
    Local Time
    06:14 AM
    Interesting piece. That would appear to be a 1905 Mk II 5*--the 3* are the more common ones found down in the US but they are identifiable by the US markings and also the downward slant of the topwood piece into the lower forestock. CC stampings are usually Cadet Corps. I wonder if the buttstock has been shortened a touch as the Ross Rifle Co roundel stamp is positioned much further aft towards the buttplate than usually seen, but it could just be a variant. As for the rearsight, that rifle was never designed to take the rearsight for the Mk III--I have seen a couple of them mounted on the barrel of the heavy barrel Mk II** rifles but really the aperture design would not work well that far from the eye. That rifle should have had a Sutherland rearsight, longer with a adjustment screw on the top right, which when the sight is folded down would fit into that groove on the topwood in front of where the sight is. So, the sight has been replaced. Would have to see that sight up close to see if it is the standard WWI military one or the pre-war finer adjustment target variant with a smaller aperture.

    It would be nice to see a photo as you say of the muzzle end of the gun to make sure it has its hood etc. Price is definitely up there especially with the wrong rearsight although those can be had easily enough. Not a common variant though, and looks to be in decent shape; stock has been varnished I think.

    Ed

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Bluenoser's Avatar
    Join Date
    Feb 2014
    Last On
    01-08-2024 @ 08:49 AM
    Location
    Canada
    Posts
    138
    Local Date
    03-28-2024
    Local Time
    09:14 AM
    The sling swivel does appear to be slightly closer to the buttplate than on my 5*. However, if the butt had been shortened, the buttplate should be too long. The fit of the buttplate looks good.
    That is one very nice looking and well marked Ross. The DP stamp on the bolt might tie in to use by the Cadet Corps. It did take quite some time to find a Sutherland sight for my 5*.

  6. #4
    Legacy Member GlennP's Avatar
    Join Date
    Aug 2017
    Last On
    02-25-2021 @ 02:53 PM
    Location
    NJ, USA
    Posts
    18
    Local Date
    03-28-2024
    Local Time
    08:14 AM
    Thread Starter
    Thank you for the quick and insightful responses!

    I have received some updated, albeit poor, photos. One of which is a higher resolution of the markings

    Boltaction; with your lead on the CC being cadet corps, I think I more accurately narrowed down some of the provenance. All three identified Cadet Corps are in a tight geographical area indicating it's possibly right?
    I believe "1519" to be the Camrose (2 Battallion Edmonton Fusiliers) Public School Cadet Corps. Source: Cadet Corps
    I believe "196" to be the Roman Catholic Separate School Cadet Corps. Source: Cadet Corps
    I believe the "1020" to be the Alberta Naval Cadet Corps. Source: Cadet Corps

    Does this seem legit?

    As far as the sight goes, if one was to find the correct sight, is it a simple replacement or is this an arduous chore? It looks riveted in which must not be easy. Or, is the base correct and just the "leaf" portion wrong, leaving the replacement to just a simple pin drifting?

    Here's the addition photos I received of the front end of the rifle. It appears complete.




    THANK YOU for the help guys!
    Last edited by GlennP; 01-09-2019 at 08:08 PM.

  7. #5
    Legacy Member Bluenoser's Avatar
    Join Date
    Feb 2014
    Last On
    01-08-2024 @ 08:49 AM
    Location
    Canada
    Posts
    138
    Local Date
    03-28-2024
    Local Time
    09:14 AM
    The sight base appears correct and the "rivets" are likely the alignment pins. Only the leaf assembly would be replaced and that is just a matter of drifting out the pivot pin.

  8. #6
    Contributing Member boltaction's Avatar
    Join Date
    Dec 2006
    Last On
    10-02-2023 @ 12:21 PM
    Location
    BC Interior
    Posts
    642
    Local Date
    03-28-2024
    Local Time
    06:14 AM
    As bluenoser said, simply a matter of drifting out the drift pin and slipping on the new correct sight. I may have a spare correct sight in my box of parts--will check for you. Front end is right as rain. And yes, those Cadet Corps markings sound right--would have been passed around a bit probably in those years!

    Ed

+ Reply to Thread

Similar Threads

  1. Unit Marking?
    By Snowman1510 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 12-31-2018, 06:57 AM
  2. Another MkII*** Unit marking question...
    By Gpcooke in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 05-23-2017, 11:23 AM
  3. Another MkII*** Unit marking question...
    By Gpcooke in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 02-20-2017, 07:01 PM
  4. Bren mkIII butt stock unit marking
    By diefliegendemaus in forum The Bren LMG (Light Machine Gun)
    Replies: 1
    Last Post: 05-11-2016, 08:52 AM
  5. Unit marking on stock?
    By coneten in forum Krag Rifles
    Replies: 2
    Last Post: 02-23-2011, 12:44 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks