+ Reply to Thread
Results 1 to 6 of 6

Thread: PH5E rear sight questions.

Click here to increase the font size Click here to reduce the font size
  1. #1
    Member Garandy's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 12:07 PM
    Posts
    99
    Local Date
    02-23-2019
    Local Time
    12:54 AM

    PH5E rear sight questions.

    While I am working on my project Rawson sight, a friend came up with a PH5E just like the one in the OP here: https://www.milsurps.com/showthread.php?t=29759

    Same clamp on base and all. He's going to send it to me as he has no use for it so I have some questions before starting this project.

    As bubba has lost the detent balls, does anyone know what size they are? (With any luck, he'll have lost the springs too.)

    Secondly, if the current mounting base is removed, is this 5E adaptable to the PH5E4 bracket? All the PH5E4 sights I have seen are relieved on the back side at the rear to match the E4 bracket contour. Will a 5E in this configuration fit a No4 action without that relief (on an an E4 mount)?

    If it will fit, are E4 brackets available? I did some quick looking and I found one that sold on Gunboards in 2013 or so but that is the only one I could find.

    Thanks

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    No Drill-Tap scope mounts for Mosin Nagant, Mauser K98K, Yugo M48, Swedish M96 and M38, Swiss K31, K11, 1911 and more! Bringing mil-surplus rifles to modern standard without damaging historical values! We specialise in military utensils and artefacts such as helmets, daggers, medals and badges, etc.  The on-line store is intended for personal browsing and searching of collecting objects. All items are provided historical value only and can be used for home collection or other purposes except of fascism, Nazism or other extremism manifestation or its propaganda. LIMITED TIME OFFER FROM THE AMERICAN GUNSMITHING INSTITUTE: Get Immediate Online Access To AGI's NEW Armorer's Course for Glock Pistols, Covering Every Generation of Glocks, Including the Latest Model 42/43 and Double Stack Pistols for ONLY $7.00! Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles We pride ourselves on being the new lowest price listing service, and the simplest to use. If you need to buy or sell collectible firearms or any firearm in your legal possession, then this is the place for you. If you’re a big collector clearing house, or other seller that could benefit from a Premium seller account, then we can also support you here at Gunonline.com. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Really Senior Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Yesterday @ 05:44 PM
    Location
    Eastern England
    Posts
    1,372
    Local Date
    02-23-2019
    Local Time
    06:54 AM
    The PH5E was a generic sight that had two mounting options with different brackets - both of which fitted into the recess at the back of the sight 'body'.

    1) PH5E was for the Mauser action
    2) PH5E4 was for the No4 action

    I have taken PH5E's and removed the Mauser 'bracket' and added the No4 bracket. Quite simple if you can get the correct No4 bracket.

    I had dimensioned 'engineering drawings' if you need to get a No4 bracket made up - let me know and I'll try and find them.

    One thing to remember is that with the PH5E4 you CANNOT use the safety. A special safety was made solely for the Enforcer (the only No4 to use the PH5E sight)
    You will either accept 'no safety' or can machine down an existing one to fit.
    Attached Thumbnails Click image for larger version

Name:	Copy_of_DSC_enf_%284%29.jpg‎
Views:	99
Size:	249.4 KB
ID:	98663  
    Last edited by Alan de Enfield; 02-04-2019 at 12:54 AM.
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  4. Thank You to Alan de Enfield For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Senior Member l1a1 breakdown's Avatar
    Join Date
    Nov 2012
    Last On
    Yesterday @ 10:28 PM
    Location
    Allentown PA
    Posts
    183
    Local Date
    02-23-2019
    Local Time
    01:54 AM
    I would appreciate those bracket drawings too Alen D E!
    Many thanks in advance.

  7. #4
    Really Senior Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Yesterday @ 05:44 PM
    Location
    Eastern England
    Posts
    1,372
    Local Date
    02-23-2019
    Local Time
    06:54 AM
    Quote Originally Posted by l1a1 breakdown View Post
    I would appreciate those bracket drawings too Alen D E!
    Many thanks in advance.
    OK - I'll post it up here as a Pdf - see if you can open it up
    (its even in proper English units - non of this foreign stuff)
    Attached Files
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  8. Thank You to Alan de Enfield For This Useful Post:


  9. #5
    Member Garandy's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 12:07 PM
    Posts
    99
    Local Date
    02-23-2019
    Local Time
    12:54 AM
    Thread Starter
    Thanks Alan. I might have a factory bracket located, but this gives me options.

  10. #6
    Member Garandy's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 12:07 PM
    Posts
    99
    Local Date
    02-23-2019
    Local Time
    12:54 AM
    Thread Starter
    My sight showed up in the mail yesterday. It is heavier than I expected. Bubba did indeed lose the W&E detent balls but the springs were still there. I've got it all stripped down to bits for cleaning and lubrication now. When the gallows arm is removed, one of the two steel balls that put pressure on the gallows arm falls out. It looks like the other hole was lightly staked at some point to prevent that. Surprised whomever staked the first hole didn't do the second as well.


+ Reply to Thread

Similar Threads

  1. PH5E/4 sight can it be used for 303 if of a 7.62
    By Chubbs in forum Parker Hale Rifles Sub-Forum
    Replies: 4
    Last Post: 08-25-2017, 09:05 AM
  2. Rear Sight Base For Parker Hale 5E/4 Rear Target Sight
    By fjruple in forum WTS/WTB/WTT (Want to Sell, Buy or Trade) Forum
    Replies: 0
    Last Post: 08-25-2017, 07:56 AM
  3. PH5E sight and safety catch
    By Chubbs in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 10
    Last Post: 08-07-2017, 08:44 PM
  4. Type 99 rear sight questions
    By WNO1958 in forum Japanese Rifles
    Replies: 3
    Last Post: 02-25-2012, 09:06 PM
  5. M1903A1 Rear Sight Slide/Slide Cap Questions
    By DeputyBill in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 4
    Last Post: 04-14-2011, 02:04 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts