just finished no4 mk1 T repro

[jwk]

Just completed my faux T, very pleased how it turned out!

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[harry mac]

Any chance of a run down of the components used, the work done and by whom?
You can't just leave it at that.
Are the other two gats in the pic genuine, or are they "homages" as well?

[jwk]

it started as a 1943 F No4 mk1 in great shape. I did not have to do any metal refinish. The wood I did myself. I stripped and boiled the stock and sanded, applied a light stain and 3 coats of boiled linseed oil. The scope kit came and cheek riser from Sarco. The mounting was done by a local gunsmith following Peters instructions I found posted here. The gunsmith said I got lucky because he did not have to remove any metal from the receiver or mounts it zeroed right up.

This is my 2nd no4 build, below is my first. Not a T repro but a nice 1948 F

[browningautorifle]

Check your pics...first one is the 03A4gery...edit...

[jwk]

The 03a4 and zf41 are both repros also- I'd be divorced for spending $ on originals and I like the restoration and building process