+ Reply to Thread
Results 1 to 10 of 10

Thread: sMLE No1Mk3 with no star, post-WW1 production?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Moderator
    (The Restorers Corner)

    louthepou's Avatar
    Join Date
    Dec 2007
    Last On
    03-01-2024 @ 05:42 PM
    Location
    Near Ottawa, Canada
    Age
    53
    Posts
    542
    Real Name
    Louis Rene
    Local Date
    04-19-2024
    Local Time
    05:23 PM

    sMLE No1Mk3 with no star, post-WW1 production?

    Hello folks,

    I tried finding some info in my Skennertonicon book about this, with no success.

    I've been going on with my life for several years knowing that the Brits moved from the No1Mk3 pattern to the No1Mk3* early in WW1, to speed up production. So gone were the mag cut-off, weight-saving cuts on the sides of the rear sight guard, windage-adjustment on the rear sight, long range volley sight (however fun that was), etc.

    I've seen a few post-WW1 receivers with the slot in the receiver for the mag cut-off. I've seen a few stars (*) crossed-off with two horizontal lines. What gives... was the No1Mk3 pattern reinstated after WW1? Or what was going on?

    Hopefully someone can shed light on this mystery. Why did I come accross quite a few "cancelled" stars on SMLE No1Mk3* receivers?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Bindi2's Avatar
    Join Date
    May 2008
    Last On
    Today @ 09:08 AM
    Location
    Western Australia
    Posts
    1,446
    Local Date
    04-20-2024
    Local Time
    06:23 AM
    The refitting of the cut off meant the * was barred out. Done between the wars. Adjustable rear sights were not refitted. Lithgowicon actions still had the slot cut on some but not all rifles up until the beginning of WW2. The forend was still made for the cut off till the end as both rifles were in use.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Moderator
    (The Restorers Corner)

    louthepou's Avatar
    Join Date
    Dec 2007
    Last On
    03-01-2024 @ 05:42 PM
    Location
    Near Ottawa, Canada
    Age
    53
    Posts
    542
    Real Name
    Louis Rene
    Local Date
    04-19-2024
    Local Time
    05:23 PM
    Thread Starter
    So this means that after WW1 some rifles received a mag cut-off if they had the slot for it?

  6. #4
    Legacy Member Bindi2's Avatar
    Join Date
    May 2008
    Last On
    Today @ 09:08 AM
    Location
    Western Australia
    Posts
    1,446
    Local Date
    04-20-2024
    Local Time
    06:23 AM
    yes The R N installed cut offs as did some other units for what ever reason. Lithgows seem to have had them installed.

  7. Thank You to Bindi2 For This Useful Post:


  8. #5
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    Today @ 12:59 PM
    Location
    Sutton Coldfield, UK.
    Posts
    3,437
    Real Name
    Roger Payne
    Local Date
    04-19-2024
    Local Time
    11:23 PM
    In 2011 I went up to Ryton Arms here in the UKicon. They had about a thousand post WW1 dated incomplete & generally knackered SMLE barrelled actions. Some weren't too bad though, & worthy of restoration. I had a good rummage through them before buying quite a few. They were approximately a 50-50 mix of post WW2 Ishapore & inter-war BSA rifles. Interestingly, the BSA's fell into two groups: 1920's dated Mk3*'s (no cut-off slot, & manufactured like that), & 1937 to 1940 dated Mk3's (with both cut-off slot & cut-off fitted). The Mk3's were NOT retro-converted Mk3*'s, & the last two digits of the manufacture date look to have been added after the rest of the date, cypher & so on. I just wonder if these Mk3's were assembled as new but using some left over WW1 components?? I suppose if the cyphers of George Vth & George VIth are different it should be easy enough in principle to tell. I must have a look.....

  9. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    owengun's Avatar
    Join Date
    Nov 2009
    Last On
    05-23-2019 @ 03:39 AM
    Location
    Ontario, CANADA
    Posts
    64
    Local Date
    04-19-2024
    Local Time
    06:23 PM
    Hi Lou,

    I have a 1941 dated Lithgowicon Mk.III with the cutoff fitted. I also have a 1920's dated Britishicon made Mk.III with cutoff fitted.

    Here are pictures of a 1929 Enfield made one -






  10. #7
    Legacy Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 03:01 PM
    Location
    London, Ontario
    Posts
    1,053
    Local Date
    04-19-2024
    Local Time
    06:23 PM
    As I recall, after W.W. I, the Brits went back to having the mag cut off for the same reason it was there before the '*'. The senior officers did not trust their men to not waste ammo.
    "...range volley sight..." Volley fire was still done(MG's were considered arty and used this way too), just not with a special sight. The rear sight on my '42 Mk III* goes to 1400 yards or more.
    "...as did some other units..." Not 'units'. The Regiments had no say in any of it. Neither did the RN for the most part.
    Spelling and Grammar count!

  11. #8
    Legacy Member newcastle's Avatar
    Join Date
    Mar 2009
    Last On
    07-15-2023 @ 02:48 PM
    Posts
    916
    Local Date
    04-19-2024
    Local Time
    03:23 PM
    The N0.1 MkV rifles made in 1922 and 1924 also had cutoffs.

  12. #9
    Legacy Member 5thBatt's Avatar
    Join Date
    Dec 2007
    Last On
    04-06-2024 @ 11:48 PM
    Location
    Zombie Town, now with a H
    Posts
    774
    Local Date
    04-20-2024
    Local Time
    10:23 AM
    The cutoff was never deleted during the Great War, changes were made to the MkIII in 1916 which are listed in part 1 of the LoC of 1916 & in part 2 of the same LoC, they introduce the MkIII*.
    Attachment 100133
    Last edited by 5thBatt; 04-25-2019 at 09:29 PM.

  13. #10
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    04-17-2024 @ 10:05 PM
    Location
    Sault Ste. Marie, ON
    Posts
    1,258
    Real Name
    A.N.
    Local Date
    04-19-2024
    Local Time
    06:23 PM
    Quote Originally Posted by Sunray View Post
    As I recall, after W.W. I, the Brits went back to having the mag cut off for the same reason it was there before the '*'. The senior officers did not trust their men to not waste ammo.
    Post 1909 the purpose of the magazine cutoff was actually due to how the Britishicon would train their soldiers. They would use the magazine cut-off for unloading and reloading, allowing soldiers to have a full magazine in the rifle well still being able to verify the rifle was safe and empty. Nothing to do with single loading by that point.


  14. The Following 2 Members Say Thank You to Eaglelord17 For This Useful Post:


+ Reply to Thread

Similar Threads

  1. A desporterized 1916 LSA No1Mk3 (no star) :)
    By louthepou in forum The Restorer's Corner
    Replies: 10
    Last Post: 04-10-2014, 11:55 PM
  2. A very specific question re. SMLE No1Mk3 (NO star!)
    By louthepou in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 26
    Last Post: 01-21-2014, 12:20 PM
  3. Another one de-sporterized (SMLE No1Mk3*)
    By louthepou in forum The Restorer's Corner
    Replies: 10
    Last Post: 05-03-2012, 06:33 PM
  4. SMLE No1Mk3 ejection problem
    By bzielke in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 11-12-2010, 02:15 PM
  5. Refurbed 1917 SSA SMLE No1Mk3*
    By louthepou in forum The Restorer's Corner
    Replies: 1
    Last Post: 10-12-2010, 07:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts