+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20

Thread: Semi-Bren fixes

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member csmarcher's Avatar
    Join Date
    Sep 2008
    Last On
    02-06-2024 @ 04:52 PM
    Location
    In the shed
    Posts
    119
    Real Name
    Gary
    Local Date
    03-19-2024
    Local Time
    02:49 AM

    Semi-Bren fixes

    I'm lucky enough to own several Semi-Brens and have been in on the development side since Len Savage at Historic Arms first started building them.

    Some of the various built guns are 100% flawless right off the bat, while others are incredibly irritating with a litany of problems.

    I'm glad we now have this sub forum and can share trouble shooting ideas and remedies. Please feel free to post up some of the various issues and solutions (where found) so that we can get everyone up and running happily again


    ATB

    Gary
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    The greatest LMG to ever see service in the British Army...........................

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member AmEngRifles's Avatar
    Join Date
    Jul 2010
    Last On
    03-31-2023 @ 06:50 AM
    Location
    Florida
    Age
    63
    Posts
    336
    Local Date
    03-19-2024
    Local Time
    05:49 AM
    Gary, as you know, I have been dealing with an HA L4A4 giving me problems. For brevities sake, one of the main issues was the gun had both an inner and outer recoil spring. Once the inner recoil spring was removed, functioning went up quite a lot. I am still dealing with a smaller issue, and haven’t quite got it resolved.

    Can you detail which Marks on the original full autos had dual recoil spring set ups? And which of the semi autos with similar information.

    Thanks!

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member csmarcher's Avatar
    Join Date
    Sep 2008
    Last On
    02-06-2024 @ 04:52 PM
    Location
    In the shed
    Posts
    119
    Real Name
    Gary
    Local Date
    03-19-2024
    Local Time
    02:49 AM
    Thread Starter
    The only Bren with a double coil recoil spring setup was the Mk I, everything else after that was a single coil.

    By dispensing with your double coil you've gone 80% of the way to fixing the issues, the remaining issues will be fixed by removing coils from the striker spring.
    I removed 5 coils from my striker spring and the inner recoil spring from my Mk I and was having zero issues or problems firing on gas setting 2 last time I was out at the range.

    I'm taking my Mk 3 up there today to compare a ML striker system to the HA one. I picked up a spare lower so I can now interchange freely.

    Stay tuned for reports !!!!

    Gazza
    The greatest LMG to ever see service in the British Army...........................

  6. #4
    Legacy Member AmEngRifles's Avatar
    Join Date
    Jul 2010
    Last On
    03-31-2023 @ 06:50 AM
    Location
    Florida
    Age
    63
    Posts
    336
    Local Date
    03-19-2024
    Local Time
    05:49 AM
    How'd the range time go? I want to get my ML upgraded MkIII back to the range soon. Surgery kept me from dealing with the heavy guns, but I am on the mend and ready to start Brening again!

  7. #5
    Contributing Member csmarcher's Avatar
    Join Date
    Sep 2008
    Last On
    02-06-2024 @ 04:52 PM
    Location
    In the shed
    Posts
    119
    Real Name
    Gary
    Local Date
    03-19-2024
    Local Time
    02:49 AM
    Thread Starter
    I'm happy to report that I have solved 100% of the issues with my Mk III Bren. I did find out that with the close bolt striker fired guns they do not run on surplus Mk VIIIz ammo but run flawlessly on modern manufactured HXP or Privi Partizan ammo. It's been a slow learning curve but i'm pretty sure I can help solve 90% of the problems that folks are having.

    Gary
    The greatest LMG to ever see service in the British Army...........................

  8. #6
    Legacy Member AmEngRifles's Avatar
    Join Date
    Jul 2010
    Last On
    03-31-2023 @ 06:50 AM
    Location
    Florida
    Age
    63
    Posts
    336
    Local Date
    03-19-2024
    Local Time
    05:49 AM
    I have been away for a while. Apologies for my absence.

    Well, with the simple snip of 3 coils off my striker spring and a trip to the range, I have found that the L4 now operates reliable on gas setting 3 with modern and hand loaded ammo. I shot ZQ, MEN and my own fodder that went 100%. I am very pleased. I suspect if I cut another two coils off then it may well run at setting 2 as yours does, but I am happy where I am at the moment. Next range trip will be all about getting the zero down and building stocks of the good stuff.

    Interesting about the MkVIIIz ammo. I have 3 crates of Mk7 ammo. I can't wait to see how it runs the Mk 3. That is coming!

  9. Thank You to AmEngRifles For This Useful Post:


  10. #7
    Contributing Member csmarcher's Avatar
    Join Date
    Sep 2008
    Last On
    02-06-2024 @ 04:52 PM
    Location
    In the shed
    Posts
    119
    Real Name
    Gary
    Local Date
    03-19-2024
    Local Time
    02:49 AM
    Thread Starter
    The MkVIIIz stuff currently on the market is fairly rubbish. Lots of hangfires and duds. I’m currently pulling the bullets, dumping the powder and reloading the bullets in new privi brass.


    The greatest LMG to ever see service in the British Army...........................

  11. #8
    Legacy Member AmEngRifles's Avatar
    Join Date
    Jul 2010
    Last On
    03-31-2023 @ 06:50 AM
    Location
    Florida
    Age
    63
    Posts
    336
    Local Date
    03-19-2024
    Local Time
    05:49 AM
    I have had my crates from over a good number of years, but that may not matter? I am sure it has to do with different storage conditions over those years. Mind sharing what the Lot numbers are on your squiffy stuff? Plus, how much of this has to do with less than optimal strikes by the semi auto striker system? I have never seen any published information on firing pin strike energy compared to the full auto Bren. Doubt there is ANY information like that. Who would be testing Brens in this day and age!?

  12. #9
    Legacy Member djandj's Avatar
    Join Date
    Mar 2013
    Last On
    12-01-2021 @ 11:53 PM
    Location
    So.Cal
    Posts
    109
    Local Date
    03-19-2024
    Local Time
    02:49 AM
    I'm in the same boat with a MKII from Len that I originally had built in 54R. Worked OK - MANY problems and several BOOMS thanks to headspacing we just couldn't work with the 54R. After a BOOM that destroyed my bolt carrier I gave up on 54R and I bought a .303 bolt and carrier which I modified to .308 along with a South African .308 barrel. Shoots nicely, but... lots of short stroking. So..... I'm on the spring removal/coil cutting train. I have my gas regulator drilled out of 5/32 which is the same as the barrel and gas port to the rod. Has anyone gone larger than that? Or is it best to just keep cutting springs?

  13. #10
    Legacy Member AmEngRifles's Avatar
    Join Date
    Jul 2010
    Last On
    03-31-2023 @ 06:50 AM
    Location
    Florida
    Age
    63
    Posts
    336
    Local Date
    03-19-2024
    Local Time
    05:49 AM
    I think I would just go with the coil cuts. Springs are pretty easy to replace, but sometimes, finding them is the trick.

    I want to find some easy replacement recoil springs for my Bren, as in, will an M-60 recoil substitute? Or a Thompson M1A1?

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Bren semi auto build - USA
    By garthok in forum The Semi-Automatic Bren LMG (Light Machine Gun)
    Replies: 41
    Last Post: 01-31-2020, 03:08 PM
  2. Semi Auto Bren section?
    By AmEngRifles in forum The Bren LMG (Light Machine Gun)
    Replies: 11
    Last Post: 05-26-2019, 10:28 AM
  3. semi auto Bren in 308?
    By blacktalon in forum The Semi-Automatic Bren LMG (Light Machine Gun)
    Replies: 4
    Last Post: 03-19-2015, 11:56 AM
  4. Bob Monkhouse fixes a Bren Gun (from movie Carry on Sergeant)
    By Badger in forum The Bren LMG (Light Machine Gun)
    Replies: 6
    Last Post: 01-08-2011, 09:32 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks