+ Reply to Thread
Results 1 to 10 of 10

Thread: No.4 Sight Block

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Strangely Brown's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 10:06 AM
    Location
    Wiltshire UK
    Age
    72
    Posts
    551
    Real Name
    Mick Kelly
    Local Date
    03-28-2024
    Local Time
    06:51 PM

    No.4 Sight Block

    I've recently seen one without a tightening screw at the front, was this a wartime expediency?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Mick

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Roy W's Avatar
    Join Date
    Aug 2015
    Last On
    Today @ 07:05 AM
    Location
    Hampshire
    Posts
    561
    Local Date
    03-28-2024
    Local Time
    01:51 PM
    Two types Mick, Screw at front uses the split dovetail foresights, the solid block, no screw, uses solid dovetail foresight blades.

  4. Thank You to Roy W For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Today @ 02:10 PM
    Location
    Edgefield, SC USA
    Posts
    4,040
    Local Date
    03-28-2024
    Local Time
    02:51 PM
    It's actually just the opposite. Split blades in the solid block, (Mk.2), and solid blades in the base with the screw, (Mk.1).

  7. Thank You to Brian Dick For This Useful Post:


  8. #4
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    08:51 PM
    Don't forget that there are SEVERAL variations AND HEIGHTS for the foresight blocks and blades of course, that you should all be aware of. I wrote a paper about the why's and wherefores a couple of years ago. Maybe it's time for a computer whizz-kid to resurrect the post and put it up again

  9. Thank You to Peter Laidler For This Useful Post:


  10. #5
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 12:25 PM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    06:51 PM
    Quote Originally Posted by Peter Laidlericon View Post
    Don't forget that there are SEVERAL variations AND HEIGHTS for the foresight blocks and blades of course, that you should all be aware of. I wrote a paper about the why's and wherefores a couple of years ago. Maybe it's time for a computer whizz-kid to resurrect the post and put it up again
    FORESIGHTS and the No4 rifle
    ________________________________________
    Sights and the No4 rifle.
    A bit of heavy weekend reading for you.......................

    There has recently been some too-ing and fro-ing correspondence about the sights used on the No4 rifles. Maybe it’s time to open up a few little previously unknown or certainly not fully understood points.

    Let’s take the foresights first. For the No4 rifle, there were 4 distinct TYPES of foresight blade. The very FIRST was, naturally enough, designated the
    BLADE, foresight. It came in eight sizes, from -.030”, -.015, 0, +.015”, +.030”, +.045”, +.060” and +.075”. These sizes (and I’m sure you all know this by heart…..) indicate the tip of the blade height below or above 1” of the exact centerline of the bore while the blade size ‘0’ is exactly 1” above the centre line of the bore ……, phew! Now for another misunderstood point. All of the actual BLADE heights are the same of approx .140” but it’s the .38” wide blade BASE (or stool) height that differs to make up the sizes. I know that some of you will say that this isn’t correct because ……… I know this and that’s because some of the commercial companies, including Parker Hale made their own variants including thinner widths, blow-up tyres and wind-up windows etc. BUT I’m talking about the Ministry of Supply/Army issue blades

    This blade was followed by a later blade style so as a result, the first original blade was redesignated the BLADE, foresight, Mk1. The Mk1 blade is easily identifiable by having a SOLID base. This is because it was retained firmly in position, gripped by the split BLOCK, band, foresight. The split foresight block is closed, to grip the solid blade, by a reverse headed screwdriver. It is the REAR of the Mk1 blade that we ought to be aware of now, where the undercut/inward sloping blade part meets up with the block, which then slopes outwards towards the base of the block. So, the side elevation of the blade forms a side-on ‘V’ shape.

    This rearwards and upwards sloping base could and did allow a line of reflected light to shine straight back into the shooters eye. Maybe not on the manicured ranges at Bisley but it certainly did in the bleak sunshine of Tunisia and Italyicon from where the complaints came

    The next foresight blade was introduced as a result of efforts to cheapen the cost of the No4 rifle in 1941. This time, instead of using a split block, band, foresight and the reverse headed 4BAscrew, the block, band was left solid. But in accordance with good engineering practice and to maintain the required friction to hold the blade secure within the block band foresight, the BLADE base was manufactured with a split block. This split block blade was called the BLADE, foresight, Mk1*

    The sizes remained the same as did the zeroing procedure, as did the side-on ‘V’ side elevation of the rear of the blade. It’s just that the block was easier and cheaper to manufacture. The new slot made very little difference to the cost of the blades because a), they were manufactured ‘biscuit-block (some call it chocolate block) fashion anyway and b), the addition of a simple slitting saw operation along the base was an almost academic addition and c), the original blades were still being produced anyway!

    So there you have the earliest Mk1and Mk1* blades.

    Now here is where we get a little more complicated. The Mk2 blade…………. The Mk2 blade was very similar to the Mk1 blade with its 8 sizes and its solid block base only this time, where the undercut/outward sloping blade part meets the base part, the base extends rearwards a small amount, then the BASE takes on an undercut inward sloping angle too. This immediately solved the reflected light problem because now, both the blade and the base reflected downwards. This blade was introduced as the BLADE, foresight, Mk2

    If things were simple, the next blade would be designated the Mk2* but we don’t do simple…., we do complicated! So, the next blade became the BLADE, foresight, Mk3. As you might expect, the Mk3 blade was identical to the double undercut Mk2 but this time came with a split base to use in the solid block band foresight.

    The earlier Mk1 and Mk1* blades were thereafter, obsolescent. Obsolescent but not obsolete so there are thousands of thousands still in service……………

    THE No5 RIFLE
    If you have a No5 rifle, then a similar situation arose there too but the situation was even more dire as the reflected line of shine certainly DID cause problems. So while the No5 blades were all split blocks, the;
    Mk1 split block blade for the No5 equates to the Mk1* blade for a No4 rifle
    and the
    Mk 2 split block blade for the No5 equates to the Mk3 blade for a No4 rifle.
    There were different part numbers for the blades indicating that there were subtle differences between the No4 and No5 types. Quite what the differences between the blades were on paper didn’t manifest its way to us as young Armourers in Malaya! We used split block ‘double undercut’ blades on every No5 we zeroed of course, but they all came from the same tubs, regardless of whether it was a No4 or 5 blade. They all looked the same to us and we treated them the same too!

    But back to No4 rifles and the BLOCK band, foresight. Are you in for the long haul? Soon after the large late 40’s FTR programmes, it was established at Fazakerley that a large percentage of fully refurbished rifles were impossible to zero due to them shooting too high. Fazakerley sought to obtain a relaxation in order to use the +.090” and +.105” STEN gun foresight blades but already there were problems relating to the final inspection standards that I won’t go into. But the same problems were apparent outside the factories and Base Workshops, in service too so while the factories, FTR programme contractors and the large REME Base workshops were NOT permitted to use the higher Sten foresight blades, a relaxation was sought that they could be used at unit level (both high sizes) and Field workshop level (just the .090 size). But this was palliative and not a cure by any means. The answer was that where a rifle was perfect in every other way, then a Mk2 BLOCK Band foresight was available.

    The ‘new’ BLOCK, band, foresight was .030” taller, at .490” than the original Mk1 block band, at .460” tall. This immediately, but invisibly, allowed for a further 2 increases in blade height (……. think about it!). The new blocks can be identified by the figure 1H for the Mk1 split block or a 2H for the Mk2 solid block, marked on the rear sloping surface. But even these didn’t last long because they only allowed for a further two ‘invisible’ increases of foresight. The problem was more acute than that with thousands otherwise perfect No4 rifles stacking up in Ordnance depots unable to be zeroed So in an act of almost desperation in January 1954, two FURTHER foresight block bands blocks were introduced. These blocks were heightened by a further .030” to .520”. So we have the original block band height of .460”, the 1949 increased height to .490” then the 1954 block band with a height of .520”. At a stroke, we now have a block band foresight that allows the highest blade ( the .075”…., don’t forget that anything higher was for the Sten gun) to be, in effect .135”……… which is 1.135” above the centre line of the bore

    So now we have a total of SIX BLOCK, band foresights.
    The Mk1 and Mk2 original, the
    Mk1H and 2H modified both .030” higher than the original, and the
    Mk1 and 2 SECOND modified, now .060” higher than the original!
    You’re not quite believing this are you? But help was at hand. The second block was pure duplication so was declared obsolescent. So that after 1954, only the first, original blocks and the third pattern, .060” taller were available from Ordnance stores. While the second pattern was obsolescent, you HAD to have the original, lower block of course in order to cater for those rifles firing LOW!

    Jeeeees, we had to learn, know and put into practice all of this rubbish! The most astute of you will now be looking at your ‘original, untouched since the factory’ rifles to see if it has the higher foresight block band fitted. Only a post 1949 made rifle will have a block marked 1H or 2H and only a post 1954 made rifle will have a block marked 1 or 2 on the rear surface as original. Before that, they were bare!

    But there’s a little more……………. Our acceptable zeroing standards state after zeroing, the blade of the foresight will overhang or be level with the edge of the foresight block. If the edge is inboard of the edge of the block, then it indicates that something is wrong with the rifle. BUT, it was discovered that while the UKicon made foresight blade bases were .38” wide, due to a tolerance error, the Canadianicon bases were .43” wide. Without going into the technicalities, a rifle fitted with a Canadian .43” wide base could fail the zeroing criteria unnecessarily. So these Canadian .43” wide blades were all declared obsolete and withdrawn.

    There, a little bit about a previously unknown feature of the No4 rifle! Not a lot of people know that!
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  11. The Following 6 Members Say Thank You to Alan de Enfield For This Useful Post:


  12. #6
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    08:51 PM
    Thanks Al. Phew....., that took the old memory cells back a bit. Good job it's all being written down and recorded for posterity on this forum. Can you imagine what it was like having to learn all of this crap now, under the beady eye of Stan Ayley our bolt action and principles of small arms instructor. Everyone with an original and unfired rifle ought to be taking a peek at his foresight block now

  13. Thank You to Peter Laidler For This Useful Post:


  14. #7
    Legacy Member Littlejohn's Avatar
    Join Date
    May 2013
    Last On
    03-25-2024 @ 03:52 PM
    Location
    Wisconsin, USA
    Posts
    91
    Local Date
    03-28-2024
    Local Time
    01:51 PM
    Quote Originally Posted by Alan de Enfield View Post
    Now here is where we get a little more complicated. The Mk2 blade…………. The Mk2 blade was very similar to the Mk1 blade with its 8 sizes and its solid block base only this time, where the undercut/outward sloping blade part meets the base part, the base extends rearwards a small amount, then the BASE takes on an undercut inward sloping angle too. This immediately solved the reflected light problem because now, both the blade and the base reflected downwards. This blade was introduced as the BLADE, foresight, Mk2

    If things were simple, the next blade would be designated the Mk2* but we don’t do simple…., we do complicated! So, the next blade became the BLADE, foresight, Mk3. As you might expect, the Mk3 blade was identical to the double undercut Mk2 but this time came with a split base to use in the solid block band foresight.
    So, this would be a MK3 blade?






  15. #8
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Today @ 02:10 PM
    Location
    Edgefield, SC USA
    Posts
    4,040
    Local Date
    03-28-2024
    Local Time
    02:51 PM
    Yes it is.

  16. Thank You to Brian Dick For This Useful Post:


  17. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    RobD's Avatar
    Join Date
    Jan 2010
    Last On
    12-14-2023 @ 03:21 AM
    Location
    UK / South Africa
    Posts
    942
    Local Date
    03-28-2024
    Local Time
    07:51 PM
    jeez, Peter
    Do you know the Skeeter Davis song "I've forgotten more... than you'll ever know"?

  18. #10
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    08:51 PM
    It's just that the little things remind you. The other day it was a call from a friend about Bren barrel nuts and I remembered a small MI (that's a miscellaneous instruction) that came out that allowed........... anyway. It's the difference between the old, long time-served ex apprentices and the amateur enthusiasts. If it's not written down the reality and reasons get lost and the myths perpetuate. Have a great rest of the day and thanks for the kind compliment

  19. The Following 3 Members Say Thank You to Peter Laidler For This Useful Post:


+ Reply to Thread

Similar Threads

  1. Late 1944 second block , adjustable sight?
    By jeep in forum M1/M2 Carbine
    Replies: 21
    Last Post: 10-01-2017, 08:53 AM
  2. Looking for a front sight block for a no4
    By ssj in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 7
    Last Post: 01-21-2014, 05:17 AM
  3. Saginaw S'G' in IP Block 1762250 1st Block
    By Rustship in forum M1/M2 Carbine
    Replies: 16
    Last Post: 05-18-2012, 10:17 PM
  4. Front Sight Protective Block
    By ChipS in forum M1/M2 Carbine
    Replies: 6
    Last Post: 06-07-2011, 07:01 PM
  5. Question about AK rear sight/gas block
    By crunch in forum Soviet Bloc Rifles
    Replies: 1
    Last Post: 11-08-2009, 01:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks