+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 19 of 19

Thread: My new 1911 BSA SMLE

Click here to increase the font size Click here to reduce the font size
  1. #11
    Legacy Member 22SqnRAE's Avatar
    Join Date
    Feb 2017
    Last On
    09-27-2023 @ 11:49 PM
    Location
    Brisbane - the middle of right side of Oz
    Posts
    304
    Local Date
    03-29-2024
    Local Time
    08:52 AM
    [QUOTE=Florey55;455162]Now I have a question about linseed oil. Why would you use a 50/50 oil and turps mix as opposed to just oil. Or the quick drying linseed oil? The one with the drying additives. Im really curious about this.[COLOR="black"]


    F55,

    A good question. When Service Rifle furniture is made, it's rough finished with medium/coarse belt sanding to keep the splinters to minimum. Consequently, most timber is fairly open grained. The usual method of treatment for furniture is being immersed in warm linseed oil for about half an hour, give or take, then drip draining above the warm tanks while the next batch are dipped. The linseed oil is warm to reduce viscosity and aid penetration in the timber to beyond the base of pores.

    The cutting of BLOicon with turps is simply like paint thinner. A less viscous oil will penetrate deeper and the turps is volatile so will evaporate off. It makes application quicker and easier. You'll note that around the neck of a BLOicon bottle, there will be a build up of crusty gunk, or dried BLO. Raw linseed oil will dry out, not as quick and won't crystallise the same. Turps helps with this thickening and gets the BLO to 'go further, quicker.' A stock that's been properly stripped and dried out will take about 4-6 coats of BLO. It can be more, depending on your timber. If using neat oil, then this will require warmth and time. You need to leave the timber in the sun to warm up and allow the oil to both seep in and 'dry' off. This takes several days to complete. Turps helps this process by allowing the oil to go deeper first and dry off quicker. The 4-6 coats of BLO and turps can be done in two days in the warmer months, no problems. That's better than a week or two.

    Boiled linseed oil has the additives and modified molecular structure that allows it to dry quicker. It's not instantaneous, but far shorter than raw linseed. A pure traditionalist will poo-hah the "cheat's" way of using BLO, and good on them. The end result, when done repetitiously and carefully, is the same. and when it comes to maintenance that one needs to do every quarter, then a gentle light wipe of BLO and turps sinks in quickly where it needs to, pools where it doesn't and dries off much quicker than raw.

    Each to their own, but I like the speed and control of cut BLO.

    I've tried Tung Oil that the Garandicon boys like, and find this OK for the initial coat or two, but finish with BLO. Again, choice. Tung is easier to work with when the timber is bare and dry, but I like the more viscous BLO to "fill up" the pores in the timber to water/dust/particle proof the timber.
    Last edited by 22SqnRAE; 07-06-2019 at 12:37 AM. Reason: Grammar and Spelling
    Trying to save Service history, one rifle at a time...

  2. Thank You to 22SqnRAE For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #12
    Legacy Member Florey55's Avatar
    Join Date
    Sep 2018
    Last On
    05-01-2022 @ 03:07 AM
    Location
    Sunny Sydney in Australia
    Age
    69
    Posts
    47
    Local Date
    03-29-2024
    Local Time
    08:52 AM
    Thread Starter
    Off to Bunnings tomorrow to get some beeswax. ( To all you non-Australians, it's a major hardware chain ).

    Question : Will one of these bars be enough for a complete SMLE stock set, or should I get more?

    Thanks, Lenny.

    Attachment 101496

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #13
    Legacy Member 22SqnRAE's Avatar
    Join Date
    Feb 2017
    Last On
    09-27-2023 @ 11:49 PM
    Location
    Brisbane - the middle of right side of Oz
    Posts
    304
    Local Date
    03-29-2024
    Local Time
    08:52 AM
    Lenny,

    Heaps! You'll do three rifles with that The trick is to use enough to fill the pores, not clog up your working.

    Recall that it's being cut with 1/3 portion of oil and turps, so will fill up an old boot polish tin no worries.

    This is a good therapy session, probably a good thing to do in front of the telly at night. It takes a while and you need a few breaks as the heel of the palm gets hot and sore! You don't use an awful lot in the process, surprisingly.

    Let us know how it turns out.

    Will post some comparison photos this arvo.
    Trying to save Service history, one rifle at a time...

  7. #14
    Legacy Member Florey55's Avatar
    Join Date
    Sep 2018
    Last On
    05-01-2022 @ 03:07 AM
    Location
    Sunny Sydney in Australia
    Age
    69
    Posts
    47
    Local Date
    03-29-2024
    Local Time
    08:52 AM
    Thread Starter
    Quote Originally Posted by 22SqnRAE View Post
    Will post some comparison photos this arvo.
    Thanks Peter !

  8. #15
    Legacy Member 22SqnRAE's Avatar
    Join Date
    Feb 2017
    Last On
    09-27-2023 @ 11:49 PM
    Location
    Brisbane - the middle of right side of Oz
    Posts
    304
    Local Date
    03-29-2024
    Local Time
    08:52 AM

    Comparison of Wax vs Linseed Oil timber finish

    Lenny,

    Here are a couple of photos to try and show the difference between plain linseed oilicon and linseed with wax.

    The No 4 Mk 1/2 is dressed in birch, and has a lovely 'fishscale' through the timber. This one was stripped, reoiled and waxed. No sanding at all.










    Now here is a fairly stock standard Lithgowicon No 1 Mk III* with a typical ex-Armoury oiled finish. The difference is the open grain and the real lack of sheen. In due course, when I've cleaned several decades of neglect and dirt (including abrasive grit) off her, she'll have the same oil and wax treatment too. No damage to timber, just more protection.









    I hope these come up reasonably, as the difference when in the hand is remarkable.

    For those following the thread, I'll reiterate. This treatment is not just to "make her look good" but to restore and preserve the rifle furniture to Service condition. The wax seals the pores and prevents ingress of water and grit, ensuring the timber remains in good condition and is not further degraded or damaged. These rifles head to the range and do meet the ground in their work. So best protecting them, to keep them working for decades to come.
    Trying to save Service history, one rifle at a time...

  9. The Following 2 Members Say Thank You to 22SqnRAE For This Useful Post:


  10. #16
    Legacy Member Florey55's Avatar
    Join Date
    Sep 2018
    Last On
    05-01-2022 @ 03:07 AM
    Location
    Sunny Sydney in Australia
    Age
    69
    Posts
    47
    Local Date
    03-29-2024
    Local Time
    08:52 AM
    Thread Starter
    Thanks for the pictures Peter.
    My, what a lovely workshop that you have.
    I have to make do with a tiny sliver at the back of our garage and the wife has to move her car when I want to use the Hornady LNL AP mounted at the end of my workbench.

  11. Thank You to Florey55 For This Useful Post:


  12. #17
    Legacy Member 5thBatt's Avatar
    Join Date
    Dec 2007
    Last On
    02-21-2024 @ 01:40 PM
    Location
    Zombie Town, now with a H
    Posts
    774
    Local Date
    03-29-2024
    Local Time
    11:52 AM
    Quote Originally Posted by Florey55 View Post
    All matching, all original (apart from somebody varnishing the stock)

    Attachment 101459Attachment 101458Attachment 101457Attachment 101460Attachment 101461
    The early BSA MkIIIs also had the serial number stamped on the underside of the cocking piece.

    The cocking piece on my 1911 BSA MkIII
    Attachment 101546

  13. #18
    Legacy Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    Today @ 04:54 AM
    Location
    Brisbane
    Posts
    2,237
    Local Date
    03-29-2024
    Local Time
    08:52 AM
    While we are doing "Wax on, Wax off":

    Gilly Stephenson in Perth, WA does a great line of waxes in different grades AND colours.

    The coloured wax sticks are meant for "filling" awkward problems" like fine cracks or open grains and you can be as artistic as you like.

    Free plug here: https://gillyswaxesandpolishes.com.au/

    See also the big green hardware shed near you.

  14. #19
    Legacy Member 22SqnRAE's Avatar
    Join Date
    Feb 2017
    Last On
    09-27-2023 @ 11:49 PM
    Location
    Brisbane - the middle of right side of Oz
    Posts
    304
    Local Date
    03-29-2024
    Local Time
    08:52 AM
    Quote Originally Posted by Bruce_in_Oz View Post
    While we are doing "Wax on, Wax off":

    Gilly Stephenson in Perth, WA does a great line of waxes in different grades AND colours.
    Any support to local apiarists to keep bee stocks healthy and active has to be a good cause. Good idea, Bruce
    Trying to save Service history, one rifle at a time...

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2

Similar Threads

  1. 1911 LSA
    By P246 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 11
    Last Post: 03-15-2017, 10:27 AM
  2. Colt's Anniversary 1911 the 1911 - 2011!
    By cwo4uscgret in forum 1911/1911A1 Service Pistol
    Replies: 8
    Last Post: 04-01-2015, 10:36 AM
  3. Parts for govt 1911 and ruger SR 1911
    By c east in forum 1911/1911A1 Service Pistol
    Replies: 4
    Last Post: 07-01-2013, 11:52 PM
  4. Looking to buy a 1911
    By gijills in forum 1911/1911A1 Service Pistol
    Replies: 21
    Last Post: 03-02-2012, 04:36 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks