+ Reply to Thread
Results 1 to 6 of 6

Thread: Enfield rescue, need some help!

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Geographer's Avatar
    Join Date
    Jul 2019
    Last On
    08-13-2021 @ 02:45 PM
    Location
    Magma, AZ
    Posts
    4
    Real Name
    Rick Baran
    Local Date
    03-29-2024
    Local Time
    04:36 AM

    Enfield rescue, need some help!

    I saved "an Enfield" from the local pawnshop. I think it's an Enfield Mk III SMLE, but I'm not versed in these rifles at all. I'm providing some photographs. I can tell that the firearm was manufactured by B.S.A. and that it appears to be a Mk III, based on the markings on the receiver piece that separates the front furniture from the rear. Up on the receiver and on the barrel are the serial numbers "I90415", and the receiver is stamped "Englandicon" under that SN.

    Other than that you'll notice that someone appears to have painted it khaki green at some distant time in the past, and more recently someone decided it needed to be in a plastic stock...because...well...reasons I guess.

    My goal is to identify it, and possibly it's age and provenance. I am also going to try to collect all the parts necessary to put a correct military stock back onto it. I'd appreciate any help anyone can provide!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Yesterday @ 12:25 PM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-29-2024
    Local Time
    08:36 AM
    Its age (date of birth) is under the "BSA" on the butt-socket. (191x)
    The 2.22" and 18.5 tonnes per square inch markings are UKicon civilian proof marks (showing it was sold out of service and into the UK gun-trade)

    Complete furniture sets are very hard to find now and if you do find one it wouldn't be surprising to see it at as much as $500-$600.
    You can learn an awful lot a bout the rifle by 'bringing it back to original' but it would be at a financial cost that you could never recover.

    You could by an all matching original for less that the refurb will cost you, and it will always be a 'bitsa'.

    I have done it and got one - no where else in the world is there one the same.
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Paul S.'s Avatar
    Join Date
    Mar 2009
    Last On
    04-08-2020 @ 06:58 PM
    Location
    Back and forth between Sydney and Southern California
    Posts
    1,594
    Local Date
    03-29-2024
    Local Time
    03:36 AM
    Go here: Parts List Schematic | Numrich

    They have most of what you will need to restore the rifle. It's worth doing!

  6. #4
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    03-20-2024 @ 06:05 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,429
    Real Name
    Roger Payne
    Local Date
    03-29-2024
    Local Time
    08:36 AM
    I would certainly agree that it is worth doing. I have about forty SMLE restoration projects, most of which will probably be inherited by someone else! However, as Alan said, the parts you will need are available but are becoming increasingly expensive, so unless you fell really lucky, you'd need to accept that you're doing it because you want to, rather than because you're hoping to make money out of the process.

    If you decide to go ahead please do keep us posted. If you have difficulties sourcing any bits from the commercial suppliers do ask here as it never ceases to amaze me how helpful people are on this forum when one of us is in need.

  7. #5
    Legacy Member Geographer's Avatar
    Join Date
    Jul 2019
    Last On
    08-13-2021 @ 02:45 PM
    Location
    Magma, AZ
    Posts
    4
    Real Name
    Rick Baran
    Local Date
    03-29-2024
    Local Time
    04:36 AM
    Thread Starter

    thanks for the feedback so far

    Thanks to everyone so far who has chimed in on my Enfield. I don't intend to sell it...I have a bad habit of keeping things that no one else wants. According to the pawn-shop owner, this Enfield has sat on his wall for almost 2 years! I got it for $175, and I'm going to have to budget the pieces(retired Navy, NOT rich!) but it'll be back the way it's supposed to be eventually!
    I refinished this old Winchester 94 after I found it for $125 in another local pawnshop. I local gunsmith did the metalwork, and I did the stock


  8. #6
    Legacy Member Roy's Avatar
    Join Date
    Mar 2009
    Last On
    04-22-2023 @ 04:09 AM
    Location
    NZ/Ocean
    Posts
    352
    Real Name
    Roy
    Local Date
    03-29-2024
    Local Time
    04:36 AM
    Check to see if it shoots ok first. And then go for it! You will know your rifle backwards. But beware, one is never enough.
    Keep Calm
    and
    Fix Bayonets

  9. Thank You to Roy For This Useful Post:


+ Reply to Thread

Similar Threads

  1. Another 03-A3 rescue
    By highpower3006 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 5
    Last Post: 04-28-2013, 11:51 AM
  2. please help me to rescue sporterized enfield
    By NRA in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 12
    Last Post: 03-05-2012, 06:51 PM
  3. Pawn shop find/Enfield rescue/restoration project
    By Sht_LE in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 28
    Last Post: 07-17-2011, 08:48 PM
  4. Rescue mission anyone?
    By RJW NZ in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 13
    Last Post: 03-09-2010, 05:59 PM
  5. The rescue; clarification on how it came about
    By Louis of PA in forum The Watering Hole OT (Off Topic) Forum
    Replies: 4
    Last Post: 04-14-2009, 01:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks