+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24

Thread: SMLE Trigger work and handguard question.

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member tsquared82's Avatar
    Join Date
    Mar 2016
    Last On
    01-04-2022 @ 01:23 PM
    Location
    Ogden, Utah
    Posts
    25
    Local Date
    03-28-2024
    Local Time
    08:05 AM

    SMLE Trigger work and handguard question.

    Hello, I have two questions that I need help with.

    1) I have stripped all the wood furniture off my No1 Mk3 to see why I have a hair trigger. Turns out that the trigger, at rest, is pressing against the sear with no slack, and only allowing it to engage at the very edge of the bolt catch. the bolt will release if I bump the cocking piece. However, with the trigger removed, the sear will raise completely home and engage the cocking piece properly. Are there varying sizes of triggers? Do I need to do some filing on the trigger or the trigger guard?

    2) Where can I find rivets for the rear handguard spring clip? I've searched high and low with no results.

    Thank you for your time!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by tsquared82; 07-27-2019 at 09:41 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Deceased August 31st, 2020 englishman_ca's Avatar
    Join Date
    Oct 2006
    Last On
    08-15-2020 @ 07:19 AM
    Location
    Ontario
    Posts
    378
    Local Date
    03-28-2024
    Local Time
    11:05 AM
    You have what is not an uncommon problem with some civilian owned LEs. It sounds like the rifle has been assembled but the trigger has not been set up and adjusted with those parts on that rifle.

    The trigger is mounted to the trigger guard. Consequently, the relative position of the trigger to the sear can be effected by the woodwork and how the guard is fitted.

    Check to make sure that the trigger guard's mag well loop portion is straight and flat (it sounds like yours could be bowed) and that it sits right down into the inlet and bears along the bottom of the inletting along its length.

    The front trigger guard screw must be tight and the steel bushing in the hole is correctly set in length (not too long).

    You don't mention if this is how the rifle came to you. A previous owner could have assembled it with random parts and and not gone through the procedure to fit them properly and adjust.
    This trigger guard mounting of the trigger was an issue in so much that Enfield actually did an update to the design on the later No.4 Mk.2 to remove the trigger from the guard and hang it from a support on the receiver to eliminate the problem of trigger pull off going out of adjustment.

    Your problem can be fixed, you just need to read up on adjusting pull off. The resource is here if you do a search.

    Rivets for the hand guard spring clip? You might have to make them. It is the tiny brass washers that are impossible to find.
    Last edited by englishman_ca; 07-28-2019 at 08:01 AM. Reason: speling

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member tsquared82's Avatar
    Join Date
    Mar 2016
    Last On
    01-04-2022 @ 01:23 PM
    Location
    Ogden, Utah
    Posts
    25
    Local Date
    03-28-2024
    Local Time
    08:05 AM
    Thread Starter
    Quote Originally Posted by englishman_ca View Post
    You have what is not an uncommon problem with some civilian owned LEs. It sounds like the rifle has been assembled but the trigger has not been set up and adjusted with those parts on that rifle.

    The trigger is mounted to the trigger guard. Consequently, the relative position of the trigger to the sear can be effected by the woodwork and how the guard is fitted.

    Check to make sure that the trigger guard's mag well loop portion is straight and flat (it sounds like yours could be bowed) and that it sits right down into the inlet and bears along the bottom of the inletting along its length.

    The front trigger guard screw must be tight and the steel bushing in the hole is correctly set in length (not too long).

    You don't mention if this is how the rifle came to you. A previous owner could have assembled it with random parts and and not gone through the procedure to fit them properly and adjust.
    This trigger guard mounting of the trigger was an issue in so much that Enfield actually did an update to the design on the later No.4 Mk.2 to remove the trigger from the guard and hang it from a support on the receiver to eliminate the problem of trigger pull off going out of adjustment.

    Your problem can be fixed, you just need to read up on adjusting pull off. The resource is here if you do a search.

    Rivets for the hand guard spring clip? You might have to make them. It is the tiny brass washers that are impossible to find.
    I should have prefaced that I have assembled this no1 mk3 with nearly all NOS parts.... foolishly thinking that I could drop in and play like an AR15. This has been a 3 year project and am getting antsy to finish it. I also have reproduction whitehead scope mounts as I intend to replicate a first war sniper.

    So, I have read Laidlericon's trigger pull off documents. If I understand right, I need to buy a fist full of triggers and possibly trigger guards and see which fits best as there are some slight variations. THEN, I would work on stoning the first stage as the sear demands?

    Thank you for your time!

  6. #4
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Today @ 10:55 AM
    Location
    Edgefield, SC USA
    Posts
    4,039
    Local Date
    03-28-2024
    Local Time
    11:05 AM
    I may have one copy left of the Canadianicon Ordnance Corps, Extracts from Instructions for Armourers that details exactly what needs to be done to set up everything on an SMLE from scratch. I'm lucky to have purchased hundreds of SMLE spares many years ago and am lucky to be able to select fit from bins of parts as you describe. It can be very time consuming but not that difficult. I can't imagine just slapping one together like an AR15 which any garage gunsmith can do. Working these old rifles is a real world learning experience. It's easy to make them pretty but not so much to make them fit and function correctly. Email me at bdlltd@bellsouth.net if interested and I'll see if I have one copy left. I still keep a clean one in my reference library and an ugly, greasy one with many handwritten notes on my bench but I seriously doubt I'll ever have them printed again as too many folks just don't buy books anymore thinking they can get everything they need as a free download off the internet.

  7. Thank You to Brian Dick For This Useful Post:


  8. #5
    Legacy Member Bindi2's Avatar
    Join Date
    May 2008
    Last On
    Today @ 09:18 AM
    Location
    Western Australia
    Posts
    1,446
    Local Date
    03-28-2024
    Local Time
    11:05 PM
    Before you stone any thing check to see if your trigger guard is bent it must be straight. The correct length collar is a must.

  9. Thank You to Bindi2 For This Useful Post:


  10. #6
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Today @ 10:55 AM
    Location
    Edgefield, SC USA
    Posts
    4,039
    Local Date
    03-28-2024
    Local Time
    11:05 AM
    I'd make a guess that if it's been assembled it with nos parts, he may have more problems in store than the trigger.

  11. #7
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 05:50 AM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    03:05 PM
    Quote Originally Posted by tsquared82 View Post
    I should have prefaced that I have assembled this no1 mk3 with nearly all NOS parts.... foolishly thinking that I could drop in and play like an AR15. This has been a 3 year project and am getting antsy to finish it. I also have reproduction whitehead scope mounts as I intend to replicate a first war sniper.

    So, I have read Laidlericon's trigger pull off documents. If I understand right, I need to buy a fist full of triggers and possibly trigger guards and see which fits best as there are some slight variations. THEN, I would work on stoning the first stage as the sear demands?

    Thank you for your time!

    These rifles were the last of the 'Hand Built, Victorian Era Rifles'

    Every one was hand built with each part hand-fitted by Armourers who knew what to do, how to do it, and the effect it would have on adjacent parts.


    These rifles are the exact opposite of 'plug & play'.

    I built my 1st one up piece by piece "0ne piece at a time" (ala Johhny cash) sourced from every corner of the planet. Eventually everything was together and functioning, but it JUST WOULDN'T COCK.

    Eventually traced the fault to the forend fouling and stopping it cocking. Replaced the forend with one off my No1 MK3 410 shotgun and it worked.



    Last edited by Alan de Enfield; 07-28-2019 at 04:15 PM.
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  12. #8
    Legacy Member tsquared82's Avatar
    Join Date
    Mar 2016
    Last On
    01-04-2022 @ 01:23 PM
    Location
    Ogden, Utah
    Posts
    25
    Local Date
    03-28-2024
    Local Time
    08:05 AM
    Thread Starter
    Well, I fiddled about with the trigger as much as I could. Even ordered a small handful of triggers and a second trigger guard. I've made sure that the trigger guard is absolutely level and straight as required. I've tried following Mr. Laidlericon's instructions on setting the trigger guard screw collar height by counting the turns and backing off a hair... which seems to leave a small gap still at full 1/2" stock collar length.

    When assembled WITHOUT any wood furniture on the metal.... the sear is held down to just a cross-eyed look away from firing unless the trigger guard fore end is only about a 1/4" from the rest of the action... which doesn't seem normal.

    My brain is telling me that I am at the point to where I need to file/stone my trigger to allow just the first stage to rest at the cocked position... and not be a hair trigger.

    Is there any further enlightenment? I feel like I may destroy my enfield. (Had to walk away from it today for fear of throwing it through my wall in a Chevy Chase style fit from Christmas Vacation.)

    My cocking piece is "DP" stamped. I may order another one without that marking if possible, just to eliminate that potential variable while I am at it.

  13. #9
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 05:50 AM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    03:05 PM
    Quote Originally Posted by tsquared82 View Post
    )

    My cocking piece is "DP" stamped. I may order another one without that marking if possible, just to eliminate that potential variable while I am at it.

    Just a very small quote on Peter's article on DP rifles :

    And before I forget, let me remind you of something else too, JUST in case you’re tempted to buy one to use as spare parts. This is what the Armourers bible says. ‘……..it will be assembled as far as possible with components which are below the standard required for a service weapon’. And another thing you ought to remember. There were NO gauging limits for DP rifles. Mmmmmmm, food for thought there!


    It could well be dimensionally incorrect (along with any other parts from a DP that you may have used - the parts were not always marked DP)
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  14. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    RobD's Avatar
    Join Date
    Jan 2010
    Last On
    12-14-2023 @ 03:21 AM
    Location
    UK / South Africa
    Posts
    942
    Local Date
    03-28-2024
    Local Time
    04:05 PM
    Tsquared
    Just a suggestion - could you post some close-up pictures of the trigger/sear/cocking piece setup without the wood in place?
    Maybe it will be obvious where the error lies.
    Rob

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. M1917 trigger work
    By mac1911 in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 9
    Last Post: 08-29-2015, 11:45 PM
  2. Trigger work?
    By c east in forum M1/M2 Carbine
    Replies: 8
    Last Post: 11-08-2009, 07:35 AM
  3. Trigger Work
    By Wineman in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 10
    Last Post: 10-22-2009, 02:32 PM
  4. Top Handguard Question
    By LimeyCarbineLover in forum M1/M2 Carbine
    Replies: 3
    Last Post: 09-21-2009, 01:51 PM
  5. Handguard Fit Question?
    By rmbert in forum The Watering Hole OT (Off Topic) Forum
    Replies: 0
    Last Post: 06-14-2009, 03:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks