+ Reply to Thread
Results 1 to 9 of 9

Thread: M1914 French Remington Rolling Block Loadings

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Danktreebranch's Avatar
    Join Date
    Mar 2019
    Last On
    08-29-2019 @ 05:09 PM
    Location
    Elkhorn, Wisconsin
    Posts
    11
    Local Date
    03-28-2024
    Local Time
    04:14 PM

    M1914 French Remington Rolling Block Loadings

    About 2 years ago I was absolutely abscessed With getting a Frenchicon M1914 Rolling block, up until 6 Months ago I watched Gunbroker and finally found one. There is just something about the 8mm lebel that just interested me And in a single shot rifle it seemed like a great Idea. I have no idea why wanted one so bad but I don't regret buying it they are really cool. A little about my gun the stock has a serial number which is 12RA831. The Gun seems to be all matching the patina matches on all parts. The action seems to have a solid lockup and it looks sturdy. My rifle has the Balle "N" marking which means it was refurbished and it is capable of firing the high pressured Balle N cartridge. The bore is in great shape for the age. With all of this information I was wondering what kind of loads I should use for this firearm I plan to take it deer hunting and do some random plinking. I do know the Balle N loading had a 230 grain bullet going at around 2300 fps.If you have any question I will do my best to answer thanks!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    11:14 PM
    A word of caution: that "N" marking is more than a century old. A problem with the RB mechanism is, that if anything is worn in the interlocking of the two block elements on their pins, this results in the block face being not quite square to the barrel axis in the locked-up position. And, of course, you cannot measure how much the system "gives" under a firing load by examining it on a bench. I suggest that you take a round and check the squareness of the cartridge base, fire it, then check again. You may be surprised.

    This lack of perfect squareness means that the bases on the fired cases are slightly skewed. Since nothing is perfect and any moving mechanism must have some play, however small, I make it a firm principle to mark my cases with a file mark filled with marker-pen ink. The cases are always used with the mark at 12 o'clock.

    That may seem a bit pernickety, but it will help your cases to last longer - and, according to the bench-rest shooters, it will improve accuracy - or, to be more precise, consistency, which is a prerequisite for accuracy.

    And please, do not try to achieve full-load velocities with a heavy bullet. That is an unnecessary strain on the rifle, your wallet - and your shoulder.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel green's Avatar
    Join Date
    Oct 2006
    Last On
    12-22-2023 @ 08:18 PM
    Posts
    445
    Local Date
    03-28-2024
    Local Time
    04:14 PM
    The Balle N mark shows that the rifle was rechambered for the M1932 N ctg which had a larger size neck.

  6. #4
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Today @ 08:26 AM
    Location
    Sault Ste. Marie, ON
    Posts
    1,257
    Real Name
    A.N.
    Local Date
    03-28-2024
    Local Time
    05:14 PM
    Personally I tend to load 44grns of 3031 under a 198 grn .323 FMJ bullet for my 8mm Lebel rifles (a 1907/15 Berthier and a Gras 70/84/14). Works pretty good and never had any pressure issues or anything. Do your own research yourself before you reload.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Danktreebranch's Avatar
    Join Date
    Mar 2019
    Last On
    08-29-2019 @ 05:09 PM
    Location
    Elkhorn, Wisconsin
    Posts
    11
    Local Date
    03-28-2024
    Local Time
    04:14 PM
    Thread Starter
    Thank you Patrick. I never knew that about the RB action. I will try that and see what the status of my rifle is. One more question Is I was reading that the "N" means the guns is suppose to have a .327 diameter bullet could somebody confirm or deny this. If true should I stick with .323 bullets or try to look for some .327 bullets. I definitely do not plan on using balle N spec loads in my gun especially of gun of this age.

  8. #6
    Legacy Member bob q's Avatar
    Join Date
    Sep 2014
    Last On
    03-20-2024 @ 10:15 PM
    Location
    north texas
    Posts
    444
    Local Date
    03-28-2024
    Local Time
    04:14 PM
    The N has nothing to do with the bore diameter . You need to slug your bore , as like all old military rifles , it will vary from rifle to rifle . You will need to know land and groove size . I have test fired my 22 8mm Lebel rifles and load about 1/2 with one bullet size and the other 1/2 with another . Your groove size should be about .326 to .330 , lands from .315 to .318 . An undersized .323 boattail will not stabilize well in a large bore and tend not to shoot well . I have used the .329 bullet in my large bore rifles for the best accuracy of any of mine . My RB groove was large at .329 . A easy on the rifle load is a .323 225 grain round nose , flat base at about 1800 to 2100 fps . If you use a light load of I-3031 powder , undersized Privi cases , and a small .323 dia bullet in a rifle with a large bore and chamber you will get a meltdown . The bullet will not seal up the chamber and bore and the powder will not burn correctly . The primer will jam the bullet in the bore and just melt the powder into a green lump . I-3031 is known for this in rifles with the above factors . Cold weather will also add to the factors , not really a problem right now in the summer .

  9. #7
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Today @ 08:26 AM
    Location
    Sault Ste. Marie, ON
    Posts
    1,257
    Real Name
    A.N.
    Local Date
    03-28-2024
    Local Time
    05:14 PM
    I have never had a issue with .323 bullets in 8mm Lebel. Both my rifles were chambered for 'N' cartridge but I found .323 198grn FMJ boattail rounds from PPU shot better than the pulled surplus larger diameter bullets I managed to acquire.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Danktreebranch's Avatar
    Join Date
    Mar 2019
    Last On
    08-29-2019 @ 05:09 PM
    Location
    Elkhorn, Wisconsin
    Posts
    11
    Local Date
    03-28-2024
    Local Time
    04:14 PM
    Thread Starter
    Quote Originally Posted by bob q View Post
    The N has nothing to do with the bore diameter . You need to slug your bore , as like all old military rifles , it will vary from rifle to rifle . You will need to know land and groove size . I have test fired my 22 8mm Lebel rifles and load about 1/2 with one bullet size and the other 1/2 with another . Your groove size should be about .326 to .330 , lands from .315 to .318 . An undersized .323 boattail will not stabilize well in a large bore and tend not to shoot well . I have used the .329 bullet in my large bore rifles for the best accuracy of any of mine . My RB groove was large at .329 . A easy on the rifle load is a .323 225 grain round nose , flat base at about 1800 to 2100 fps . If you use a light load of I-3031 powder , undersized Privi cases , and a small .323 dia bullet in a rifle with a large bore and chamber you will get a meltdown . The bullet will not seal up the chamber and bore and the powder will not burn correctly . The primer will jam the bullet in the bore and just melt the powder into a green lump . I-3031 is known for this in rifles with the above factors . Cold weather will also add to the factors , not really a problem right now in the summer .
    Wow I had that problem with the "meltdown" several times with some of my earlier loads I had no idea what it was thanks. this is my first and will be my only french rifle. with all my other surplus rifles this one has been the hardest to create a good load for.

  11. #9
    Legacy Member bob q's Avatar
    Join Date
    Sep 2014
    Last On
    03-20-2024 @ 10:15 PM
    Location
    north texas
    Posts
    444
    Local Date
    03-28-2024
    Local Time
    04:14 PM
    Yes 8mm Lebel is a hard one to get shooting right . On some rifles you just can't get the " right " bullets . That is why I slugged all my bores , made a chart comparing bore area , and test fired about a 1000 rounds with a lot of different bullet and powder combo's .

+ Reply to Thread

Similar Threads

  1. Remington Rolling Block rifles
    By RCS in forum Black Powder
    Replies: 2
    Last Post: 03-11-2019, 04:43 PM
  2. Remington built Swedish Rolling Block
    By Buccaneer in forum Black Powder
    Replies: 3
    Last Post: 08-06-2013, 04:53 AM
  3. Turkish(?) Remington Rolling Block.
    By Anzac15 in forum Milsurps General Discussion Forum
    Replies: 2
    Last Post: 09-25-2012, 05:46 PM
  4. Remington Rolling Block- Restoration Possible?
    By Midmichigun in forum The Restorer's Corner
    Replies: 8
    Last Post: 08-31-2012, 09:37 AM
  5. Remington Model 4 Rolling Block Rifle
    By Pattern14 in forum The Watering Hole OT (Off Topic) Forum
    Replies: 6
    Last Post: 06-02-2010, 06:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks