+ Reply to Thread
Results 1 to 9 of 9

Thread: Khaki Silica Paint also on No. 32 and C No.32, Mk.I (TP) Scopes?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Hideyoshi's Avatar
    Join Date
    Feb 2018
    Last On
    03-23-2022 @ 02:30 PM
    Location
    Lima, Peru
    Posts
    21
    Local Date
    03-29-2024
    Local Time
    01:01 AM

    Question Khaki Silica Paint also on No. 32 and C No.32, Mk.I (TP) Scopes?

    Morning all, it's been a long time.

    Something just popped out into my mind, and I wondered if the above mentioned scopes had some examples painted the way the C No. 67 Mk.I were, that means, if R.E.L. applied the distinctive khaki silica paint on them.

    IIRC, I saw an example of a Trade Pattern scope painted this way, applying the paint over it, without removing the original black base paint (IIRC, they were painted this way, if painted, and not treated).

    I wondered if No. 32s were sometimes applied this khaki silica paint, au lieu of their standard black paint. Any ideas?

    Thanks most all for your help.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Lee Enfield's Avatar
    Join Date
    Oct 2006
    Last On
    03-16-2024 @ 12:24 PM
    Location
    out there
    Posts
    1,820
    Local Date
    03-29-2024
    Local Time
    12:01 AM
    There are known standard blued, black, green and khaki finished C.No67MkI(c.no32mk4) scopes.

    The black one clearly shows as a wrinkle paint similar to early Brit no32s and Sterling SMGs. I took a closer look, you can clearly see bluing under the wrinkle paint where the rings sit.

    There seem to have been 2 finishes applied to the green ones - some appear to be a wrinkle finish with paint over top, others look like a shiny smooth oil finish.

    They seem to have been experimenting with finishes on the No67 scopes.

    There are known painted No32 MkI TP scopes. But all the TP scopes were originally blued by Lyman.

    I've seen a couple REL No32's which showed evidence of paint, but it was always over bluing.
    Last edited by Lee Enfield; 08-14-2019 at 06:37 PM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    03-20-2024 @ 06:05 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,429
    Real Name
    Roger Payne
    Local Date
    03-29-2024
    Local Time
    06:01 AM
    Hello. I've seen about thirty-odd TP scopes & they were all standard Lyman factory blue, consistent with lee enfield's comments above. I have one CNo67 which is finished in the dull slightly textured green paint. Is this what you refer to as silica paint? Most if not all of the REL No32's I've seen/owned were factory blued. It's possible I may have encountered one or two that were black over painted, but I can't remember for sure. I don't get too excited too often about black over painting as it can be very difficult to know who did it & when.
    Last edited by Roger Payne; 08-14-2019 at 06:44 PM.

  6. #4
    Legacy Member Hideyoshi's Avatar
    Join Date
    Feb 2018
    Last On
    03-23-2022 @ 02:30 PM
    Location
    Lima, Peru
    Posts
    21
    Local Date
    03-29-2024
    Local Time
    01:01 AM
    Thread Starter
    Hello Lee Enfield, and thank you for replying.

    My knowledge base, being honest, is limited to only Clive Law's Without Warning, Sam's Sloppy Sniper Section and Web and Forum searchings, so I'm surprised to find there were more than one green/olive drab finish to R.E.L. scopes. True, I noticed also some No.32s had a kind of a rough black paint finish, and a way smoother black finish one, which, most likely is bluing. The finish I'm referring to is the shiny smooth oil finish you mentioned (looks like bright matte olive drab to me). I recall reading somewhere this paint was effective in protecting the scope from the elements, cannot recall thge source sadly.

    It's good to know R.E.L. did some work on No. 32s painting them with what I hope is the smooth oil finish, and I hope to see an example later on.

    Do you know if No. 67s were blued before being applied either green finish?

    Thanks in advance.

    ---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------

    ---------- Post added at 06:56 PM ---------- Previous post was at 06:55 PM ----------

    ---------- Post added at 06:57 PM ---------- Previous post was at 06:56 PM ----------

    Quote Originally Posted by Roger Payneicon View Post
    Hello. I've seen about thirty-odd TP scopes & they were all standard Lyman factory blue, consistent with lee enfield's comments above. I have one CNo67 which is finished in the dull slightly textured green paint. Is this what you refer to as silica paint? Most if not all of the REL No32's I've seen/owned were factory blued. It's possible I may have encountered one or two that were black over painted, but I can't remember for sure. I don't get too excited too often about black over painting as it can be very difficult to know who did it & when.
    Hello Roger, and thank you for replying.

    As I told to Lee Enfield, I was referring to the bright matte olive drab finish, which, IIRC, was weather-resistant.

    Hideyoshi.

  7. #5
    Advisory Panel Lee Enfield's Avatar
    Join Date
    Oct 2006
    Last On
    03-16-2024 @ 12:24 PM
    Location
    out there
    Posts
    1,820
    Local Date
    03-29-2024
    Local Time
    12:01 AM
    I think that you are looking at pictures of "suncorite" paint refinished Britishicon scopes.

    I believe they were originally blued as well.
    Last edited by Lee Enfield; 08-14-2019 at 09:38 PM.

  8. #6
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    03-20-2024 @ 06:05 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,429
    Real Name
    Roger Payne
    Local Date
    03-29-2024
    Local Time
    06:01 AM
    I think pretty well all scopes were blued as they left the factory, apart from some Mk3's (of Taylor Hobson manufacture. I'm not sure, & someone can possibly chip in on this, but some late Kershaw Mk3's may also have had a chemical finish). However, most Mk3's & I think (sticking my neck out) pretty well all earlier scopes, were blued originally. Many have been refinished in military service, as well as by civilians, since.
    You will, however, see black paint on earlier scopes on the brass parts, as of course, conventional bluing techniques don't work on brass. I think some manufacturers chemically blackened the brass larger components but the majority just used black paint.
    Last edited by Roger Payne; 08-15-2019 at 06:00 AM. Reason: typo

  9. #7
    Legacy Member Hideyoshi's Avatar
    Join Date
    Feb 2018
    Last On
    03-23-2022 @ 02:30 PM
    Location
    Lima, Peru
    Posts
    21
    Local Date
    03-29-2024
    Local Time
    01:01 AM
    Thread Starter
    Quote Originally Posted by Roger Payneicon View Post
    I think pretty well all scopes were blued as they left the factory, apart from some Mk3's (of Taylor Hobson manufacture. I'm not sure, & someone can possibly chip in on this, but some late Kershaw Mk3's may also have had a chemical finish). However, most Mk3's & I think (sticking my neck out) pretty well all earlier scopes, were blued originally. Many have been refinished in military service, as well as by civilians, since.
    You will, however, see black paint on earlier scopes on the brass parts, as of course, conventional bluing techniques don't work on brass. I think some manufacturers chemically blackened the brass larger components but the majority just used black paint.
    Hello Roger, and thanks for the info, most of it was unknown to me.

    I should've been a bit clearer and state that if there were No. 32s with the bright matte olive drab finish some No. 67 were painted over with. I have not seen any examples around, so hence my curiosity. R.E.L. was doing tests back then, and it shouldn't be that weird they were also doing some job on No. 32s.

    Hideyoshi.

  10. #8
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    03-20-2024 @ 06:05 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,429
    Real Name
    Roger Payne
    Local Date
    03-29-2024
    Local Time
    06:01 AM
    Ah! I see. Not aware of any to date, personally, but that doesn't mean they aren't out there. Perhaps some of our resident experts on Canadianicon kit will be able to clarify.

  11. #9
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-29-2024
    Local Time
    08:01 AM
    Some No32's and L1A1's were definitely overpainted with sploshes of khaki and sand coloured paint - along with the rifles, spotting scopes and binos. The courses usually added a bit to the lenses for good measure plus a squashed mars bar or yorkie bar on the ocular lenses when both were kept in the kidney pouches. Best was the melted boiled sweets from the 10-man pack that would jamb up one of the ocular focusing mechanisms up. While they were quick to splosh the paint everywhere, they weren't so keen to remove it at the end of the course - or tell Alex the instrument tech that the binos were now shagged! Happy days

+ Reply to Thread

Similar Threads

  1. Israeli No. 32 sniper scopes: need info from owners of Isreali 32 scopes
    By Warren in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 11
    Last Post: 05-14-2014, 05:06 PM
  2. Help with Khaki vs OD green
    By painter777 in forum M1/M2 Carbine
    Replies: 13
    Last Post: 02-09-2013, 08:13 PM
  3. Anyone see Khaki?
    By painter777 in forum M1/M2 Carbine
    Replies: 7
    Last Post: 04-12-2012, 03:19 AM
  4. Canadian Marked (C and Broad Arrow) Khaki Wool Riding Breeches
    By Teapot in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 4
    Last Post: 07-01-2011, 09:14 PM
  5. Sling dates, khaki vs. OD
    By m2carbine in forum M1/M2 Carbine
    Replies: 4
    Last Post: 04-15-2010, 12:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks