+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 21

Thread: Reloading question

Click here to increase the font size Click here to reduce the font size
  1. #11
    Legacy Member bob q's Avatar
    Join Date
    Sep 2014
    Last On
    03-20-2024 @ 10:15 PM
    Location
    north texas
    Posts
    444
    Local Date
    03-28-2024
    Local Time
    08:15 AM
    No , it kind of answers the question on who crimps using 100's of people as examples . I am sure my 20 + years of match shooting every week , test firing for accuracy over 2000 rifles , building custom rifles , and my ballistic lab for cartridge development pales in comparison to your experiences ?????

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #12
    Legacy Member bob q's Avatar
    Join Date
    Sep 2014
    Last On
    03-20-2024 @ 10:15 PM
    Location
    north texas
    Posts
    444
    Local Date
    03-28-2024
    Local Time
    08:15 AM
    Got a nice private message from old Browning with a bunch of name calling . He is a real class act . Can you get banned for name calling in a private message ? I am sorry someone with real shooting experience upsets him so much !

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #13
    Contributing Member usabaker's Avatar
    Join Date
    May 2017
    Last On
    Yesterday @ 10:33 PM
    Location
    San Deigo, CA
    Posts
    1,732
    Real Name
    Bill Baker
    Local Date
    03-28-2024
    Local Time
    06:15 AM
    If the bullet doesn't have a cannelure or the case mouth is not sitting on the cannelure can you really call that crimping? that's more like tightening and the problem with that is unless you never remove the dies from your press or head then you will never get the exact same 'crimp' from session to session. You would be better served to get a die set that uses neck sizer die bushing to adjust neck tension.

    I'm sure that you will find accuracy on both side of the crimp or not crimp topic. I would never dispute it because you really can't (just that simple) there are too many variables. I can tell you that even with non-crippmed reloads you can get different results if they have shot a week apart, a month, a year. In the summer and in the winter. When I first started reloading 'in the olden days' I crimped everything, after learning more I decided crimping was not necessary and to be honest I did not see a differance in APPLICATION accuracy, I was not trying to load to tight standards I mostly load for hunting and am not a target shooter.

    And each rifle is going to print different, one might like a crimp, one might not, SO really IMHO the only way you can find an answer to your questions is to load and test crimped and uncripped and see which Willie Wonka Gobstopper your rifle likes.
    Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
    " Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "

  6. #14
    Legacy Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    Today @ 04:54 AM
    Location
    Brisbane
    Posts
    2,237
    Local Date
    03-28-2024
    Local Time
    11:15 PM
    Crimping is probably of no value for ammo used in slow-fire bench-rest or target work with bolt-action rifles.

    HOWEVER, in semis, (or full-autos), it is a "good thing", because the ammo gets shoved from the magazine quite violently. Some rifles are "nicer' than others. An M1icon rifle will, if in good condition, feed empty cases from the clip, straight into the chamber, without damaging the case neck. Other designs? Not so much. Furthermore, if your ammo is sloshing back and forth in the magazine with the recoil of every shot, un-crimped projectiles MAY start to move, this altering all your good work at the loading bench.

    I started using the Lee "Factory Crimp" dies when they first appeared, for these reasons. Note that pretty much ALL "issue" ammo is crimped, usually at the end of the neck.

    What I found interesting was that the biggest performance improvement came in a couple of "long-range" loads for .223Rem. One of these involves a compressed powder load that was showing odd variations in muzzle velocity and grouping. A delicate application of the Lee die successfully ironed that out. YMMV, and all that.

    The Lee dies can be set to "just" form a crimp or form a deep crimp that will impress a substantial cannelure into a plain, jacketed bullet. In the dark ages, I had used a hand-operated cannelure-forming tool; slow and painful.

    If you look at original .303 Mk7 ammo, it does NOT have a mouth crimp, but radially-impressed "stab"-crimps back along the neck. One of my shooting buddies has 're-engineered" a Lee die to replicate that style of crimps. I'll await the results.

    The only problem is that every time the mouth is "folded" in to form the crimp, it works the brass pretty hard. Even with regular annealing, (and trimming!), splits will start to occur. Brass cases are ultimately a "consumable" (but recyclable) item. If you get more than ten reloads out of a .223 firing decent loads from an AR platform, or .303 from a Lee Enfield, you are doing well.

  7. #15
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    03-25-2024 @ 11:01 AM
    Location
    South West Western Australia
    Posts
    7,734
    Real Name
    CINDERS
    Local Date
    03-28-2024
    Local Time
    09:15 PM
    Tried crimping but gave up on that as if you have your dies set up there should be uniform tension on the neck I brought an AMP annealing machine to anneal all my cases whether F class or Milsurp as the brass becomes work hardened from repeated passing through the dies which can and does alter the neck tension plus repeated firings does not do much for them.
    I ensure the inside of the necks are spotless as are the primer pockets spotless & uniformed in depth and flash holes deburred inside cases all TTL'ed to the same length.
    And weighing the load to within 1-2 powder kernels of each other along with the time of day and humidity rating being as close as possible same batches of projies, primers & same cases all come to bear, I gave up weighing the brass otherwise I may as well sleep in the shed all cartridge ogive lengths for jump are measured with a comparator (Hornady comparator don't really trust the nuts.).

    As rifles are all individuals so are we what groups in my rifle may not group in yours its just keep trying till you find the sweet spot for that rifle and for goodness sake change one thing at a time if you swap & change multiple things you'll chase your tail till your outside legs are longer than your inside ones.
    Been there done that trust me I pretty much wore out my first 6.5 x 284 barrel chasing loads that worked with 5 different powders, 2 different primers, 5 different projies and weights/seating depths and so on ad nauseum, as we suffer shortages here in the west with all components so I had to spend nearly a year doing that, so I am only a small fry so don't flash and ash me because you think I am talking out of my freckle.

  8. #16
    Legacy Member pocketshaver's Avatar
    Join Date
    Dec 2018
    Last On
    09-23-2020 @ 04:17 AM
    Location
    usa
    Posts
    229
    Local Date
    03-28-2024
    Local Time
    08:15 AM
    military snipers use a crimp. So as a result a crimp shant cause any issues with accuracy as long as you don't oh say, crimp so much you damage the jacket

  9. #17
    Legacy Member Daan Kemp's Avatar
    Join Date
    Jan 2016
    Last On
    Today @ 06:54 AM
    Location
    Centurion RSA
    Age
    73
    Posts
    1,392
    Real Name
    Daan Kemp
    Local Date
    03-28-2024
    Local Time
    03:15 PM
    I would love to have more detail about military snipers using a crimp. Sounds very interesting.

  10. #18
    Legacy Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    Today @ 04:54 AM
    Location
    Brisbane
    Posts
    2,237
    Local Date
    03-28-2024
    Local Time
    11:15 PM
    Until relatively recently, most snipers used the issue ball of the times. Not much "standard" ball ammo that does NOT have a mouth crimp (or in the case of .303 Mk7, stab-crimps on the neck.

    The US M-21 sniper rig, (Match-conditioned M-14 with optics), was set-up for "issue" Match ammo (M118) and more recently, M-852 with the 168gn BTHP bullet. With the advent of "shooting machines" like the Accuracy International AW, etc, that special "match-grade" (Lapua, as I recall) ammo was issued as the ONLY "authorized cartridge", except in dire emergencies.

    In the 1960's, the Soviets introduced "special" ammo for their Dragunov semi-auto "sniper" rifle. When the Finns "hot-rodded" a bunch of their Mosin Nagants into the TKIV series, they introduced, not just a "new" rifle, but a whole new set of ammo and bore specifications that define their "new" old cartridge, the 7.62 x 53. Essentially the same case, but with a tighter groove spec and match-grade .308" bullets. "Standard" 7.62 x 54R is permitted "in emergencies". Still in service, last time I looked, but probably up for replacement; some of the receivers are over a hundred years old.

  11. Thank You to Bruce_in_Oz For This Useful Post:


  12. #19
    Legacy Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    Today @ 04:54 AM
    Location
    Brisbane
    Posts
    2,237
    Local Date
    03-28-2024
    Local Time
    11:15 PM
    For those looking for the "spec" of M852, see: TM43-0001-27, ARMY AMMUNITION DATA SHEETS SMALL CALIBER AMMUNITION, Section 11, page 31

  13. #20
    Contributing Member Atticus Thraxx's Avatar
    Join Date
    May 2020
    Last On
    10-14-2023 @ 09:51 AM
    Location
    Yolo County CA
    Age
    61
    Posts
    150
    Real Name
    GEORGE
    Local Date
    03-28-2024
    Local Time
    06:15 AM
    Quote Originally Posted by bob q View Post
    Crimping can be a "crutch " to poor quality handloads . But if you have good quality , matched components crimping never helps accuracy . I have been match shooting for over 20 years . Everything from national level benchrest to sporter class and old military rifles . None of the shooters in BR or the best shooters in the others ever crimped anything .
    He's right. Heck looking at my boxes of Sierra bullets, all Match King, no crimp grooves. When I had custom bullets made for my BR rig, no crimp groove. My stuff follows in that only the military bullets have the crimp groove. Hornady .303 and 8mm for me. My Norma 6.5x55s do not have the groove however.

+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast

Similar Threads

  1. reloading question
    By chopperbobby in forum M1/M2 Carbine
    Replies: 2
    Last Post: 06-29-2017, 11:28 PM
  2. Reloading 30-40 Krag question.
    By yoopercollector in forum Ammunition and Reloading for Old Milsurps
    Replies: 16
    Last Post: 01-03-2016, 12:52 PM
  3. reloading for Swedes question
    By robdan1 in forum Ammunition and Reloading for Old Milsurps
    Replies: 3
    Last Post: 07-14-2012, 08:40 PM
  4. Question about reloading.
    By newcastle in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 9
    Last Post: 12-10-2011, 01:16 PM
  5. Reloading Question for AR / 223 brass
    By Jocko in forum M16A2/AR15A2 Rifles
    Replies: 4
    Last Post: 07-13-2009, 10:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks