+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23

Thread: 1898 Headpsace Out of Whack

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member CHUCKW's Avatar
    Join Date
    Sep 2013
    Last On
    05-03-2023 @ 06:15 PM
    Location
    Virginia
    Posts
    32
    Local Date
    03-28-2024
    Local Time
    01:29 PM

    Unhappy 1898 Headpsace Out of Whack

    Hey all,

    I just checked the headspace on my 1898 with Clymer go, no-go gauges and the bolt closed on both. Is there a fix for this? I have not fired this gun but would like to. Hope someone can help.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member CHUCKW's Avatar
    Join Date
    Sep 2013
    Last On
    05-03-2023 @ 06:15 PM
    Location
    Virginia
    Posts
    32
    Local Date
    03-28-2024
    Local Time
    01:29 PM
    Thread Starter
    Anyone?

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member rcathey's Avatar
    Join Date
    Dec 2012
    Last On
    Yesterday @ 11:56 AM
    Location
    St. Louis, MO Area
    Posts
    1,645
    Local Date
    03-28-2024
    Local Time
    12:29 PM
    Quote Originally Posted by CHUCKW View Post
    Anyone?
    Do you have access to another bolt? Maybe you’d get lucky and that’ll help.

  6. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    10:29 AM
    Quote Originally Posted by CHUCKW View Post
    Hope someone can help.
    Hang on a couple days, being the weekend...the usual suspects will see this and I'm sure you'll get more answers.

    I have to ask though, have you shot it? Is there a problem? How does the brass look...
    Regards, Jim

  7. #5
    Legacy Member CHUCKW's Avatar
    Join Date
    Sep 2013
    Last On
    05-03-2023 @ 06:15 PM
    Location
    Virginia
    Posts
    32
    Local Date
    03-28-2024
    Local Time
    01:29 PM
    Thread Starter
    Quote Originally Posted by browningautorifleicon View Post
    Hang on a couple days, being the weekend...the usual suspects will see this and I'm sure you'll get more answers.

    I have to ask though, have you shot it? Is there a problem? How does the brass look...
    I have not fired it yet. I wanted to verify that the headspace was good first and it doesn't seem to be.

    ---------- Post added at 08:46 AM ---------- Previous post was at 08:46 AM ----------

    Quote Originally Posted by rcathey View Post
    Do you have access to another bolt? Maybe you’d get lucky and that’ll help.
    I don't have another but could look online, I guess.

  8. #6
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    07:29 PM
    First of all, may we assume that you have inspected the bolt for any obvious signs of damage or excessive wear? If the bolt is OK, then maybe there is nothing wrong with your rifle at all.

    Some explanation is in order here, but don't take anything I write on trust - others will have a different opinion.

    The 30-40 US Kragicon is a rimmed bottle-neck cartridge.
    The rim means that, even if the neck is set back very far (relative to the chamber) the cartridge cannot move forwards any more than permitted by the head/rim clearance, i.e. the space between the front of the rim and the bottom of the rim recess in the chamber.

    Now the Krag was a cartridge introduced in the 1890s, like the .303 Britishicon. And like the .303 it was a military cartridge. Furthermore, it was about 30 years before SAAMI was set up, so using modern standards to judge something made decades before those standards were established is not fair on the items concerned.

    Sticking my neck out a little here, I would guess that, just like the .303s and other military cartridges of that era, the Krags were made with a good chamber tolerance, and a "high" shoulder, so that the maximum tolerance cartridge would fit in the minimum tolerance chamber, even in a dirty chamber after the soldier had let a clip fall in the mud, wiped it off on his trousers, and then loaded it in the rifle. Type acceptance tests were made for the kind of worst case situation that might arise in battle. Benchrest tolerances were not envisaged!

    And, don't forget, military cartridges were made to be used once only. My limited experience with .303s is that the neck, after firing, is noticeably further forwards than on a freshly resized case. No problem with once-only use, and better than a high case shoulder possibly impeding loading of the case, with potential slam-fire problems when the bolt had to be banged shut. Or a rifle put out of action because the case was hopelessly jammed. - Battle rifles had to function in tough conditions.

    In other words, that fact that you can chamber a no-go gauge made to modern standards does not prove much more than that you can chamber a no-go gauge made to modern standards. So what?

    There is quite possibly nothing wrong with your rifle at all. I understand that you are concerned about possible safety problems, so I suggest that you measure the head/rim clearance, which I described only last week in answer to a similar query. Please look it up.

    Since a rimmed case is held back by the rim, regardless of any clearance between the shoulder on the case and the shoulder in the chamber, about the worst that can happen on firing is that the case will be stretched as the shoulder moved forwards to match the chamber. This is the major reason why it is not good to fully resize cases on old milsurps in general. Fully resizing will lead to an early case failure, typically about 1/2" above the base.

    So measure the head/rim clearance, as described elsewhere. It is likely to be in the range 10-30 thousandths of an inch. Much more than that, and the gun may fail to fire, because the firing pin fails to detonate the primer. Check the bolt, chamber etc for sign of damage. Then you can fire a test round. Measure the position of the shoulder after firing and compare it with an unfired case. You may well be surprised at the difference.

    The trouble with headspace gauges, in my view, is that they may provide a false sense of security. While it is true to say that the use of a headspace gauge can point out a potential safety problem, such as battered bolt lugs, that needs to be investigated, the reverse - that a "pass" using headspace gauges proves that the rifle is safe to fire - is not true.

    Finally, gauge sets should have a "go" gauge, a "no-go" gauge, and finally a "field" gauge. I have suggested above, that military rifles will frequently accept a "no-go" gauge, because of the combination of initial manufacturing tolerances and a century or more of wear. But a failure with a "field" gauge (i.e beyond that acceptable for a active service rifle) would be a more serious indication that something is wrong.
    Last edited by Patrick Chadwick; 09-16-2019 at 03:05 PM.

  9. Thank You to Patrick Chadwick For This Useful Post:


  10. #7
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-28-2024
    Local Time
    01:29 PM
    I use a 'knock-off' .30-40 Field Gauge that measures .073". None of my Krags will close on this. (I strip the bolt for testing).

    Amazingly, my fired Brass Cases will fit, (without re-sizing), eight different Kragicon rifles and carbines.

    I do have a model 1896 rifle that has a larger diameter chamber. The head-space is OK, but, fired cases are expanded more in diameter, so they will not chamber in my other Krags without Full-Length re-sizing. (I segregate Brass fired in this rifle and just Neck-Size it).

    For my other Krags, I also just 'Neck-Size' my Brass, when reloading. (I don't have to keep the Brass separated by rifle).

    I have also answered OP's question on Krag Collector's Association Forum.
    Last edited by butlersrangers; 09-16-2019 at 03:09 PM.

  11. #8
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    10:29 AM
    So again I ask. Maybe he should fire it and see if there's a problem? I'm not talking out of my a$$ after all, I've had these too...
    Regards, Jim

  12. #9
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-28-2024
    Local Time
    01:29 PM
    'CHUCKW' can add a thin washer or layers of foil to his 'No-Go' head-space gauge, to build up rim thickness to .070 to .073". This will allow it to serve as a 'Field' gauge, for repeat testing.

    Should his bolt close on this impromptu 'Field' gauge, a NOS model 1898 bolt can be bought on ebay for $55.

  13. #10
    Legacy Member CHUCKW's Avatar
    Join Date
    Sep 2013
    Last On
    05-03-2023 @ 06:15 PM
    Location
    Virginia
    Posts
    32
    Local Date
    03-28-2024
    Local Time
    01:29 PM
    Thread Starter
    Thanks to everyone for their replies. I will re=read them all and consider my way forward. I am feeling more confident about my Kragicon now but will be cautious.

  14. Thank You to CHUCKW For This Useful Post:


+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. 1898 Krag ?
    By RAAAR in forum Krag Rifles
    Replies: 5
    Last Post: 05-07-2017, 06:55 PM
  2. 1898/ffl?
    By restoreit1 in forum Krag Rifles
    Replies: 3
    Last Post: 09-23-2013, 12:52 AM
  3. 1898 lec 1
    By ActionYobbo in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 8
    Last Post: 08-17-2012, 04:57 PM
  4. Taking A Whack At Assembling My Own Ar
    By STYER in forum M16A2/AR15A2 Rifles
    Replies: 13
    Last Post: 10-17-2009, 02:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks