+ Reply to Thread
Results 1 to 8 of 8

Thread: British No. 7 small parts needed

Click here to increase the font size Click here to reduce the font size
  1. #1
    Member Cottage Hill Bill's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 09:27 AM
    Posts
    74
    Local Date
    12-01-2020
    Local Time
    12:59 PM

    British No. 7 small parts needed

    I am in need of the following parts for a Britishicon No.7 .22

    extractor, extractor spring and pin, striker, striker spring and retainer, auxiliary extractor.

    If you have any of these parts available, or have parts and would be willing supply a measured photograph or drawings that could be used to reproduce the parts please let me know.

    Thanks in advance,

    Reese
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    Banner AD Space Available - Click HERE to Inquire Family owned and operated since 1962, Simpson LTD is the largest collector firearms store in the Midwest. Our globally sourced inventory represents many eras, with an emphasis on World War II and our favorite firearm, the Luger, of which we typically have 2,500 in stock.  Inventory changes daily with 10,000 firearms ready to ship; along with accessories, militaria, and hundreds of book titles. We also offer appraisals, consignment services ranging from single items to full collections, and we are one of the most reliable and competitively priced import and export services available.  We do not offer parts or gunsmithing, but we have a little bit of everything else. Visit our website for more information and our new technical video series Speaking Luger, and like Simpson Ltd on Facebook for updates, previews, and more. LIMITED TIME OFFER FROM THE AMERICAN GUNSMITHING INSTITUTE: Get Immediate Online Access To AGI's NEW Armorer's Course for Glock Pistols, Covering Every Generation of Glocks, Including the Latest Model 42/43 and Double Stack Pistols for ONLY $7.00! Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses. Banner AD Space Available - Click HERE to Inquire
     

  3. #2
    Really Senior Member Mk VII's Avatar
    Join Date
    Dec 2008
    Last On
    Today @ 12:24 PM
    Location
    England
    Age
    59
    Posts
    1,198
    Local Date
    12-01-2020
    Local Time
    06:59 PM
    A Browning HP extractor spring works well for the extractor.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Really Senior Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 02:44 PM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    1,873
    Local Date
    12-01-2020
    Local Time
    06:59 PM
    Quote Originally Posted by Cottage Hill Bill View Post
    I am in need of the following parts for a Britishicon No.7 .22



    extractor, extractor spring and pin, striker, striker spring and retainer, auxiliary extractor.

    If you have any of these parts available, or have parts and would be willing supply a measured photograph or drawings that could be used to reproduce the parts please let me know.

    Thanks in advance,

    Reese
    Brian Dickicon produced these a few years ago (I think he said NEVER AGAIN !!) but may have drawings / dimensions.

    You can only ask.
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  6. #4
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    11-22-2020 @ 03:00 PM
    Location
    Edgefield, SC USA
    Posts
    3,736
    Local Date
    12-01-2020
    Local Time
    01:59 PM
    I had the sets produced by AJ Parker back in the early 1990's, (did the deal with Edna!), when Springfield Sporters imported the load of unfinished rifles. I had 25 sets made, (it took a year to get them), and they fitted up perfectly to 20 of the rifles that I bought at the time. I had five spare sets that got sold/fitted for others that also bought the incomplete rifles and that was it. I tried for 20 years to find a reputable machinist that would reverse engineer and make more sets. I even loaned one a set from an original No.7Mk.1 I had here at the time and was lucky to get them back after a year with no progress. That was the end of it for me. There are no design drawings I know of unless they're buried at the Royal Armouries. They were built by BSA so the Royal Armouries may not even have them.

  7. #5
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    11-26-2019 @ 10:07 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,240
    Local Date
    12-01-2020
    Local Time
    08:59 PM
    I had a BSA/UKicon No7 rifle for 30 years and so far as I recall, the only thing that would be difficult to reproduce would be the bolt head and the insert plate part for the No1 magazine. The remainder would be a doddle..., even the ejector. Two parts brazed together with absolutely no (or VERY little) mechanical loading to bear. Extractors could be cut 30 at a time using laser or water jet cutting. As could the aux spring. A simple fly-press jig to shape the slightly cranked end then anneal, harden and temper. I'd have got my teeth into that within a day or so.............

    The BSA drawings are all at the Birmingham museum of science and technology and I understand that Aston Uni have some of the metallurgy research stuff

  8. #6
    Member Cottage Hill Bill's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 09:27 AM
    Posts
    74
    Local Date
    12-01-2020
    Local Time
    12:59 PM
    Thread Starter
    Peter, Any way to access the drawings from over the pond? I agree most of the bits I need could be fabricated but I have no drawings, dimensions or originals to work from.

  9. #7
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    11-26-2019 @ 10:07 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,240
    Local Date
    12-01-2020
    Local Time
    08:59 PM
    No need I'd say. They would be simplicity itself to back engineer. Or a letter to BMS&T

  10. #8
    Member Cottage Hill Bill's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 09:27 AM
    Posts
    74
    Local Date
    12-01-2020
    Local Time
    12:59 PM
    Thread Starter
    Thanks to some very special folks here I now have everything except the secondary extractor.

+ Reply to Thread

Similar Threads

  1. British Army Dispatch rider small arms ?
    By bigduke6 in forum Milsurps General Discussion Forum
    Replies: 4
    Last Post: 11-10-2016, 07:26 PM
  2. a small piece of No.4(T) research in the British archives
    By Mk VII in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 12-29-2013, 01:30 PM
  3. ??? Small caliber rifles for British Army's experiences
    By pzluchs in forum M16A2/AR15A2 Rifles
    Replies: 3
    Last Post: 06-30-2013, 11:06 AM
  4. Small parts.
    By Mikey51 in forum M1/M2 Carbine
    Replies: 4
    Last Post: 12-03-2011, 01:43 PM
  5. 1903A3 Small Parts
    By RBruce in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 2
    Last Post: 02-15-2011, 05:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts