+ Reply to Thread
Results 1 to 6 of 6

Thread: Mauser Stock Wood Question...

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member amadeus76's Avatar
    Join Date
    Dec 2016
    Last On
    01-11-2024 @ 06:51 PM
    Location
    Harker Heights, tx
    Posts
    305
    Local Date
    03-28-2024
    Local Time
    04:14 AM

    Mauser Stock Wood Question...

    So I’m looking at a couple different Swedishicon Mauser’s that all have different wood types for the stocks. The nicest looking one is Elm but having never handled an Elm stocked rifle I’m lost on the quality... Is Elm a good wood for gun stocks? Is there any reason to avoid it in comparison to other wood types such as walnut?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member AGB-1's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2022 @ 05:41 PM
    Location
    Krugerville Texas
    Age
    84
    Posts
    344
    Local Date
    03-28-2024
    Local Time
    04:14 AM
    Last edited by AGB-1; 10-20-2019 at 01:03 PM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Daan Kemp's Avatar
    Join Date
    Jan 2016
    Last On
    Today @ 01:40 AM
    Location
    Centurion RSA
    Age
    73
    Posts
    1,392
    Real Name
    Daan Kemp
    Local Date
    03-28-2024
    Local Time
    11:14 AM
    The military wouldn't use 'bad' wood for stocks. However, it follows that some types of wood are better for rifle stocks but all were good, depending on supply. Pick the prettiest one.

  6. #4
    Legacy Member DB404's Avatar
    Join Date
    Feb 2016
    Last On
    11-15-2020 @ 12:12 PM
    Location
    Below Alaska
    Posts
    1
    Local Date
    03-28-2024
    Local Time
    04:14 AM
    Don't know if this is accurate, but from looking at Mauser stocks on various contract '98 rifles, it might be. IIRC, the idea posted was that the Germanicon military considered figured walnut as a defect that potentially weakened the stock which made it more likely to break in rough use (combat). The K98s I've had were either plain grain, straight walnut or laminated while a number of South American contract rifles from DWM, Mauser Oberndorf and CZ that I have seen and/or owned had a good bit of fiddleback grain - one was a 1909 Argentineicon Infantry rifle that had tight fiddleback running the full length of the stock, on both sides of the stock....and was broken in two at the wrist. Whoever first posited this idea suggested that the figured stocks were culls, and went onto other countries rifles. I agree that no military would intentionally select bad wood for a stock, but final say so on exports would depend on both contract specifications and the customer's inspectors.

    BTW, historically, the Scandinavians were very much accuracy conscious and I doubt they'd accept any stock which wasn't strong and stable. Not a lot of walnut grows in the far north, so if they used native woods, it would most likely be beech.

    All the best - Dave
    Last edited by DB404; 05-22-2020 at 12:11 PM. Reason: gramar

  7. #5
    Legacy Member Jim's Avatar
    Join Date
    Oct 2007
    Last On
    06-04-2020 @ 06:12 PM
    Location
    Texas
    Posts
    185
    Local Date
    03-28-2024
    Local Time
    04:14 AM

    elm stocks

    For examples of elm stocks, just look over Yugoslavian M48 Mauser rifles. Their first choice for rifle stocks was walnut which is what the used on their pre-WWII rifles. But post war, walnut became hard and expensive to acquire so they tried others. Elm seems to have made up the bulk of them (some say "Carpathian elm" but I don't have any positive info in that detail) It tends to looking reddish like. How it's cut can make drastic changes in how it looks. Straight grained it can bear a very strong resemblance to red oak. The difference will show in cross grain cuts (like the butt stock bottom). Elm will not have the cross grain 'rays' so typical of oak.
    Here is an example of one of mine. For a wide range of variations, just google image Yugoslavian M48 Mauser rifles.
    Another thought occurs. They continued with elm onto their sks rifles too!

    Attachment 108792 Attachment 108793 Attachment 108791

    Some have Walnut stocks like my M48B below but these are not so common. The bulk of what you see will be elm.
    Anyway, I hope this helps you some.

    Attachment 108794
    Last edited by Jim; 06-02-2020 at 08:50 AM. Reason: addition

  8. #6
    Legacy Member Jim's Avatar
    Join Date
    Oct 2007
    Last On
    06-04-2020 @ 06:12 PM
    Location
    Texas
    Posts
    185
    Local Date
    03-28-2024
    Local Time
    04:14 AM

    Elm stocks II

    It turned out I didn't have a picture of my Sks for the above reply. So I shot a couple. This is a Yugoslav M59 sks. It has a quarter sawn elm stock. I know the post is in reference to Mauser rifles. I'm just using this to show how this wood cut this way appears, something I did not have in a Mauser. I know this ole rifle looks to have been rode hard and put out wet but, it will serve thee purpose. Shoots pretty well too.

    Attachment 108810

+ Reply to Thread

Similar Threads

  1. Question about hi wood IMB stock
    By RCS in forum M1/M2 Carbine
    Replies: 9
    Last Post: 12-24-2019, 08:38 AM
  2. Thoughts on this WRA I cut Hi-wood Stock
    By painter777 in forum M1/M2 Carbine
    Replies: 12
    Last Post: 06-12-2010, 07:39 AM
  3. Ebay RMC Hi-Wood Stock
    By painter777 in forum M1/M2 Carbine
    Replies: 6
    Last Post: 02-09-2010, 08:32 AM
  4. Mauser 96 original wood finish
    By daveboy in forum The Restorer's Corner
    Replies: 2
    Last Post: 06-15-2009, 09:21 PM
  5. Mauser Stock Question
    By Valkyrie45 in forum Mauser Rifles
    Replies: 3
    Last Post: 05-15-2009, 02:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks