+ Reply to Thread
Results 1 to 7 of 7

Thread: Remington 1903 magazine catch assembly

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member iron sights's Avatar
    Join Date
    Aug 2016
    Last On
    03-12-2024 @ 12:05 PM
    Location
    California USA
    Posts
    10
    Real Name
    Joe Huld
    Local Date
    03-28-2024
    Local Time
    11:27 PM

    Remington 1903 magazine catch assembly

    I finally got all the parts together to assemble my 1942 Remington 03 s/n 3225014 which is an 03 with the milled magazine/trigger guard not an 03A3. All went pretty well until I got to assembling the magazine catch. I have been trying to insert the pin through the trigger guard and catch with the spring in place but just cant get the hole in the catch to line up and allow the pin to slide in. I did check the pin and it fits both the trigger guard and the catch and it will slide in so the problem has to be alignment. I don't see any way to insert the spring after assembling everything else so I am wondering if there is a trick I don't know. If all else fails I'll grind a taper on a piece of drill rod to use as a drift but I thought I'd ask if there is a trick that I don't know. Any suggestions very welcome.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member ArtPahl's Avatar
    Join Date
    Jan 2015
    Last On
    03-22-2024 @ 10:51 AM
    Location
    Michigan
    Posts
    192
    Local Date
    03-29-2024
    Local Time
    02:27 AM
    You have an interesting problem. Since it's been quite a while since I've done it, I took one of my '03's apart to check the magazine catch. I used a decapping pin assembly from a reloading die set as a drift and was able to push the cross pin out with little effort. It went back together easily, too. There is, I guess, no trick.

    I wonder if you have a catch for a 1917 Enfield. The bottom surface is similiar but the top surface of the 1917 is flat while the 1903 is contoured. I suppose you could also have a defective 1903 catch. With war-time sub-contractor production that's a possibility that has to be considered.

    I'm sorry I couldn't be more help.

  4. Thank You to ArtPahl For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member iron sights's Avatar
    Join Date
    Aug 2016
    Last On
    03-12-2024 @ 12:05 PM
    Location
    California USA
    Posts
    10
    Real Name
    Joe Huld
    Local Date
    03-28-2024
    Local Time
    11:27 PM
    Thread Starter
    Thanks Art; you were a lot of help. I did finally get it using a #43 drill shank as a drift, wiggling the pin around until it started in, then using a 3/32 pin punch to drive it in. New problem is that it still won't latch securely. Thanks again for pointing out the difference between an 03 and 1917 catch; mine is definitely the correct 03 catch. Tomorrow I am going to disassemble it again, and clean everything thoroughly. If that doesn't work I'll get out the needle files and see if I can clean the catch up enough to work. As a last resort I'll buy another catch from Numrich.

  7. #4
    Legacy Member ArtPahl's Avatar
    Join Date
    Jan 2015
    Last On
    03-22-2024 @ 10:51 AM
    Location
    Michigan
    Posts
    192
    Local Date
    03-29-2024
    Local Time
    02:27 AM
    Before you go to Numrich, let me check my parts stock. Several years ago, I bought a batch of 1903 small parts on (I think) Gunbroker. They are in the origional military inventory packages. I've opened most of the packages, but put the parts back in them. I'm sure I have 3 or 4 of those catches that I'll never use. If you can't get yours to work, I'll send you one.

    Update: I found 3 of 'em, still in unopened envelopes! Marked:
    1005-513-5890
    CATCH FLOOR PLATE
    1 EA A 8-67
    RK RGB

    Might not be any better than what you have. Need any other small parts? There's a bunch of envelopes marked "spring" or "pin" and the part numbers (???). Got any use for stripped bolts; new in the wrapper, by Brown & Sharp or Smith Corona? There's even 3 unused 1903 trigger guards in with that batch.

  8. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:49 AM
    Location
    Victoria BC
    Posts
    29,839
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    11:27 PM
    Quote Originally Posted by ArtPahl View Post
    Need any other small parts? There's a bunch of envelopes marked "spring" or "pin" and the part numbers (???). Got any use for stripped bolts; new in the wrapper, by Brown & Sharp or Smith Corona? There's even 3 unused 1903 trigger guards in with that batch.
    Sounds like you have enough to put up here on a WTS ad...bet you don't have them long...
    Regards, Jim

  9. #6
    Legacy Member ArtPahl's Avatar
    Join Date
    Jan 2015
    Last On
    03-22-2024 @ 10:51 AM
    Location
    Michigan
    Posts
    192
    Local Date
    03-29-2024
    Local Time
    02:27 AM
    This is an aside from your original subject. The serial number of your rifle puts it solidly in the so-called "modified" range and I am curious as to what you can identify as different from Springfield, RIA, or early Remington rifles. I have 7 Remington 1903's in my collection, all have been altered to one degree or other so that the receiver is the only part that I can be sure is original. Per Joe Poyer's book, your rifle was built in 9/42. I have 2 in the "modified" range; built in 7/42 and 10/42. The only change I can see in the 7/42 is the tang drilled through for the rear action screw. The 10/42, however, has the flat tang with the hole drilled through, and the front of the cut-off boss not contoured. Of course, the bolt stop milling is long gone (I don't know when they stopped that). The drilled through tang appears to have been instituted earlier than the "modified" rifles. I have a 5/42 rifle with a serial number 50,267 below that of the first "modified" with the tang drilled through. I have 2- 2/42 rifles not drilled through.

  10. #7
    Legacy Member iron sights's Avatar
    Join Date
    Aug 2016
    Last On
    03-12-2024 @ 12:05 PM
    Location
    California USA
    Posts
    10
    Real Name
    Joe Huld
    Local Date
    03-28-2024
    Local Time
    11:27 PM
    Thread Starter
    Just saw your post this AM so I got the rifle out to look. Attached are photos; the tang is drilled through and the cutoff looks like it what you refer to as contoured.
    I bought it a parts gun price but when I started cleaning it was obviously worth saving as it was missing only the internal magazine parts. This rifle is certainly a rebuild though since the Remington barrel is dated 8/42 it may be original to the receiver. The stock it was in when I got it was a C stock with a drawing number, a serial number and a smooth butt plate with punch mark stippling. Another forum member advised that the stock was from a USMC marksmanship team rifle and offered to trade a nice straight grip stock and some cash for it to which I agreed.

+ Reply to Thread

Similar Threads

  1. Magazine assembly to which rifle?
    By Promo in forum Milsurps General Discussion Forum
    Replies: 2
    Last Post: 01-29-2018, 03:33 PM
  2. Any information on British modifed US M3 SMG magazine catch
    By RCS in forum Other LMG/HMG and SMG Forum
    Replies: 7
    Last Post: 08-07-2016, 01:36 AM
  3. Stuck magazine catch pin?
    By Beginner in forum The Bren LMG (Light Machine Gun)
    Replies: 20
    Last Post: 08-29-2015, 03:52 AM
  4. Mystery magazine catch
    By Vincent in forum Milsurps General Discussion Forum
    Replies: 1
    Last Post: 11-23-2012, 01:14 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks