+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Newly inherited Winchester 1897, could use info

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Fourtyfive's Avatar
    Join Date
    Dec 2019
    Last On
    12-17-2019 @ 08:21 PM
    Location
    Dallas TX
    Posts
    4
    Local Date
    03-18-2024
    Local Time
    09:46 PM

    Newly inherited Winchester 1897, could use info

    Inherited an 1897 take down that belonged to my great grandpa. I don't know much about these, but have been doing some research to find as much as I can.

    Serial # is E941xxx which I found dated to 1942, barrel is also stamped 42. It has the US Flaming bomb markings on the receiver as well as the bomb on barrel with what appears to be WP markings, but they're pretty rough and hard to make out. The stock has the "WB" cartouche and ordinance marking, but almost completely worn off. I actually didn't even notice the ordinance mark until it showed up in the camera. Not sure if it was ever a Trench/riot gun or what. There is no barrel shroud, sling swivels, or bayonet lug. The barrel is just under 20" cyl bore and doesn't have a bead site.

    The things throwing me off on this is, There isn't a bead on the barrel, and the coloring is more of a brown than blued, which may just be discoloring from sitting in a corner for 25ish years.

    Attachment 104172Attachment 104171Attachment 104173Attachment 104174Attachment 104175Attachment 104176Attachment 104177
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member rcathey's Avatar
    Join Date
    Dec 2012
    Last On
    03-14-2024 @ 03:09 PM
    Location
    St. Louis, MO Area
    Posts
    1,645
    Local Date
    03-18-2024
    Local Time
    10:46 PM
    It would appear as though grandpa chopped all the military bits off the barrel shroud.
    What you have there is what's left after cutting off the heat shield and bayonet lug (and this took the bead with it).

    If the guard was simply discarded when the shotgun moved into civilian life, there would be nothing holding the magazine tube to the barrel. This is a pretty clever alternative to having to buy more parts. Neat!

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:51 PM
    Location
    Victoria BC
    Posts
    29,810
    Real Name
    Jim
    Local Date
    03-18-2024
    Local Time
    08:46 PM
    Agreed, you have the third transverse groove for the forward screw of the bayonet adapter present so if you manage to find a replacement shroud you have a proper trench gun again.
    Regards, Jim

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Fourtyfive's Avatar
    Join Date
    Dec 2019
    Last On
    12-17-2019 @ 08:21 PM
    Location
    Dallas TX
    Posts
    4
    Local Date
    03-18-2024
    Local Time
    09:46 PM
    Thread Starter
    Quote Originally Posted by browningautorifleicon View Post
    if you manage to find a replacement shroud you have a proper trench gun again.
    Thank you for the replies. Haven't really looked to much for the shroud, but did find a reproduction on numrich and a few other sites. I have no interest in selling the gun, but would like to restore it to former glory. It sucks because we got this, a 1937/38 1903 Springfield and an Arisakaicon type 99, and he sporterized all of them. the Arisaka was re-chambered to 300 Savage.

  7. #5
    Contributing Member rcathey's Avatar
    Join Date
    Dec 2012
    Last On
    03-14-2024 @ 03:09 PM
    Location
    St. Louis, MO Area
    Posts
    1,645
    Local Date
    03-18-2024
    Local Time
    10:46 PM
    This one would be definitely worth paying up for an original. Preferably one with the same "been there, done that" look as the rest of the shotgun.
    I wouldn't mind seeing some pics of the sporterized stuff. Especially the 1903.

  8. #6
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:51 PM
    Location
    Victoria BC
    Posts
    29,810
    Real Name
    Jim
    Local Date
    03-18-2024
    Local Time
    08:46 PM
    Quote Originally Posted by Fourtyfive View Post
    did find a reproduction on numrich and a few other sites
    You'll need to look hard, not at Numrich. There are other repros that are good but you CAN find originals if you seek them. You should figure out which exact one you need and then the search begins. Gunbroker for instance...here on a WTB...
    Regards, Jim

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Fourtyfive's Avatar
    Join Date
    Dec 2019
    Last On
    12-17-2019 @ 08:21 PM
    Location
    Dallas TX
    Posts
    4
    Local Date
    03-18-2024
    Local Time
    09:46 PM
    Thread Starter
    Quote Originally Posted by browningautorifleicon View Post
    You'll need to look hard, not at Numrich
    Yea I just googled barrel shroud to see what came up and found the one at numrich. Wasn't looking there specifically. hopefully I can find one.
    Edit: I did find one that claims to be "Unissued government replacement parts". but how true that is is a different question. UNISSUED Winchester 1897 heat shield with bayonet lug

    Another thing I am curious about is the missing swivel on the stock. There doesn't seem to be any where it was attached. So if someone did repair that section of the stock, they did a damn good job.

    Quote Originally Posted by rcathey View Post
    I wouldn't mind seeing some pics of the sporterized stuff. Especially the 1903
    Here are a few photos of the Springfield. Serial # 870xxx and has US on the left side by the front scope mount. No other markings that I saw. My dad still has the Arisakaicon.
    Attachment 104202Attachment 104203Attachment 104204
    Last edited by Fourtyfive; 12-08-2019 at 09:31 PM.

  10. #8
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:51 PM
    Location
    Victoria BC
    Posts
    29,810
    Real Name
    Jim
    Local Date
    03-18-2024
    Local Time
    08:46 PM
    Quote Originally Posted by Fourtyfive View Post
    the missing swivel on the stock.
    I'm wondering if someone has altered the angle of the belly of the stock...what is the buttplate, brass?

    Quote Originally Posted by Fourtyfive View Post
    "Unissued government replacement parts".
    Even in the '70s when I last saw an original it was more than that. An original will be more than $149...I promise.
    Regards, Jim

  11. #9
    Contributing Member rcathey's Avatar
    Join Date
    Dec 2012
    Last On
    03-14-2024 @ 03:09 PM
    Location
    St. Louis, MO Area
    Posts
    1,645
    Local Date
    03-18-2024
    Local Time
    10:46 PM
    Quote Originally Posted by browningautorifleicon View Post
    Even in the '70s when I last saw an original it was more than that. An original will be more than $149...I promise.
    One sold on eBay 4 days ago for $400.

    To the OP, that's not a bad looking sporter! It would improve things considerably, looks wise, if it had a vintage scope on it. An old Weaver K4 or something like that would be just the ticket.

  12. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    Fourtyfive's Avatar
    Join Date
    Dec 2019
    Last On
    12-17-2019 @ 08:21 PM
    Location
    Dallas TX
    Posts
    4
    Local Date
    03-18-2024
    Local Time
    09:46 PM
    Thread Starter
    Quote Originally Posted by browningautorifleicon View Post
    I'm wondering if someone has altered the angle of the belly of the stock...what is the buttplate, brass?
    No. Its a discolored white plastic.
    Last edited by Fourtyfive; 12-09-2019 at 10:32 AM.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Newly inherited 1903 - help please
    By emckinley in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 5
    Last Post: 12-23-2019, 11:32 AM
  2. M1 Carbine, inherited. Info? Value?
    By BL USMC in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 4
    Last Post: 02-09-2019, 04:51 PM
  3. My newly inherited 1912 No.1 Mk.III
    By mobular in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 06-21-2011, 05:10 AM
  4. Inherited M1 carbine seeking info
    By NyteOwl in forum M1/M2 Carbine
    Replies: 5
    Last Post: 05-03-2009, 08:05 PM
  5. Inherited M1 Winchester Carbine Questions
    By creeks in forum M1/M2 Carbine
    Replies: 5
    Last Post: 03-26-2009, 12:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks