+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 25

Thread: Jap 7.7 Ammo...Safe to Shoot?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member 728shooter's Avatar
    Join Date
    Dec 2014
    Last On
    03-06-2024 @ 04:39 PM
    Location
    South Florida
    Posts
    74
    Local Date
    03-28-2024
    Local Time
    05:49 PM

    Jap 7.7 Ammo...Safe to Shoot?

    Friend of mine has some original military surplus Jap 7.7 ammo. Some are loose rounds, but he also has numerous charger clips of 30 rounds each, which I assume is meant for loading into a machine gun. Ammo looks relatively clean with no corrosion anywhere. I saw no head-stamp on any of the rounds I looked at, so there is no way to identify as to when or where it was made.

    I recall reading that the Arisakaicon receiver was one of, if not the strongest receiver of all war-era military rifles made. I also have heard that MG ammo was usually loaded hotter than that which was intended for rifle use only. That being said;
    1) Is any of this ammo safe to shoot?
    2) Is the MG ammo safe to shoot in an Arisaka type 99 rifle?

    Appreciate any & all comments on this. I can get it for a fraction of what commercial ammo is selling for but if it won't work, then its not such a good deal...

    Thanks, --728shooter
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. Thank You to 728shooter For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member bob q's Avatar
    Join Date
    Sep 2014
    Last On
    03-20-2024 @ 10:15 PM
    Location
    north texas
    Posts
    444
    Local Date
    03-28-2024
    Local Time
    05:49 PM
    If it is machine gun ammo , it can be a different 7.7mm cartridge . It will be semi-rimmed and will not fit in a rifle . If it is rifle ammo in strippers it is worth a lot more as collector ammo than shooter ammo . There is new made ammo that would be a better choice for shooting .

  5. The Following 2 Members Say Thank You to bob q For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    03:49 PM
    At this distance of time I suggest it would be interesting to film the firing of such rare(?) ammo, both from rifles and MGs. That is literally a historical experience now, and it would be interesting to at least some people to know how if any the sound differed from .303 MkVII.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  8. Thank You to Surpmil For This Useful Post:


  9. #4
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    03-25-2024 @ 11:01 AM
    Location
    South West Western Australia
    Posts
    7,734
    Real Name
    CINDERS
    Local Date
    03-29-2024
    Local Time
    06:49 AM
    Japanese WWII ammo for the rifles etc was as far as I know never head stamped they usually have 3 stakes on the primer though.

    From Wikipedia;
    Design
    While the round chambered by the Arisakaicon rifle used a rimless case, rimmed and semi-rimmed variants were produced for use in some Japanese machine guns. This machine gun ammunition is more powerful, and the altered rim is meant to prevent it from being chambered in a rifle.

    Japanese ammunition
    All Japanese military ammunition used gilding metal jackets for the bullets on ball and the Pentaerythritol tetranitrate (PETN)-filled flat-tipped explosive incendiary, cupro-nickel jackets for tracer and phosphorus incendiary and a brass bullet with steel core for armor-piercing. The bullet type was signified by a colored band over the case mouth.

    Bullet Jacket Marking Code Description
    Ball gilding-metal Pink or Salmon ring jacketed lead-core bullet
    Armor-Piercing - Black ring brass bullet with a steel core
    Tracer cupro-nickel Green ring pyrotechnic core in a lead bullet
    Incendiary cupro-nickel Magenta ring white phosphorus core in a lead envelope
    High Explosive gilding-metal Purple ring PETN core in a flat-tipped lead envelope
    Late war ammunition can still be encountered.
    Last edited by CINDERS; 12-12-2019 at 06:58 AM.

  10. The Following 3 Members Say Thank You to CINDERS For This Useful Post:


  11. #5
    Legacy Member RCS's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 05:15 PM
    Location
    USA
    Posts
    4,314
    Real Name
    Robert Seccombe
    Local Date
    03-28-2024
    Local Time
    05:49 PM

    Japanese ammo

    My cousin served in the USMC during WW2 and sent back to my father and uncle two Type 99 rifles chambered for the 7,7mm. At young age, I save my money and bought Norma 7,7 Jap cartridges. later on I bought RCBS loading dies and was able to reload the Norma 7,7mm many times. Others saved money and formed 7,7mm from 30-06. I would never even consider shooting original Japaneseicon cartridges, not worth the risk and they belong in collections.

    I also have a 7,7 Japanese rimmed cartridge from WW2, this cartridge was designed for the Japanese Lewis machine gun, not only did they copy the weapon but also the 303 cartridge. Also interesting is that the Japanese 7,7 rimmed will chamber in a Lee Enfield Rifleicon (I tried it) I would never fire a 7,7 rimmed in any Lee Enfield but I think it would work out. My photo shows a 7,7 Jap on far rightAttachment 104221Attachment 104222

  12. The Following 3 Members Say Thank You to RCS For This Useful Post:


  13. #6
    Legacy Member AZPhil's Avatar
    Join Date
    Dec 2007
    Last On
    02-23-2021 @ 12:03 AM
    Location
    Yuma,AZ
    Posts
    370
    Local Date
    03-28-2024
    Local Time
    06:49 PM
    If it is for a type 92. On brass strips , Bob is correct and it will be rimless and not for the type 99 rifle. It was made to be used on their automatic weapons and will be a hotter round. With that being said. I used to shot surplus Germanicon, Japaneseicon and Britishicon ammo in the 80's. Now I see how much folks are asking for these as a collectors item!!
    You might just want to sell or keep for your own collection and buy some Privi rounds to shoot!!

    Semper Fi
    Phil

  14. The Following 2 Members Say Thank You to AZPhil For This Useful Post:


  15. #7
    Legacy Member beachdog77's Avatar
    Join Date
    Jan 2019
    Last On
    02-25-2021 @ 10:28 PM
    Location
    Ca
    Posts
    95
    Local Date
    03-28-2024
    Local Time
    02:49 PM
    The information of where and when it was made was on a paper label on the waxed linen cardboard box the brass stripper came in.
    As had been stated, the Japaneseicon had More than one 7.7
    7.7 semi rimmed Is loaded hotter and the Japanese put the rim on it to prevent it from being mistaken as 7.7 rimless. They did not want the MG ammo being used in rifles, i would have to agree. While you can use it if you angle and dangle it into the chamber, doesnt mean you should. While there can be debates about the strength of an action and metallurgy, realistically a type 99 is not designed for that ammo.
    There are options out there for 7.7 Graf usually has some loaded in PPU brass. Hornady occasionally puts some out there. I do not recommend PCI out of indiana. Or you can load it yourself if you want to get into that but based on the fact that you have is really a collectors item and not designed for a type 99 any how, i would hang on to it. Besides it is not like they japanese are making that any more right?

  16. Thank You to beachdog77 For This Useful Post:


  17. #8
    Legacy Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 03:01 PM
    Location
    London, Ontario
    Posts
    1,053
    Local Date
    03-28-2024
    Local Time
    06:49 PM
    "...original military surplus Jap 7.7 ammo..." Collector stuff. Not shooting stuff.
    Rummage around here for head stamp ID. Headstamp Codes - International Ammunition Association
    No head stamp usually means it's not milsurp. ALL military's are and were identification crazy.
    Midway shows Norma 174 grain SP, 7.7 Jap at $39.99 per 20. Currently on Back order, of course. Graf's lists only hunting ammo too. 180 grain SP Made specifically for Graf's using Norma brass and Prvi bullets at $33.99 per 20. And Precision Cartridge brand, 150 grain SP, at $31.99 per 20.
    Dies etc are readily available too.
    Spelling and Grammar count!

  18. Thank You to Sunray For This Useful Post:


  19. #9
    Legacy Member vintage hunter's Avatar
    Join Date
    Dec 2010
    Last On
    @
    Location
    S.C.
    Age
    56
    Posts
    1,680
    Local Date
    03-28-2024
    Local Time
    06:49 PM
    Quote Originally Posted by Sunray View Post
    "...original military surplus Jap 7.7 ammo..." Collector stuff. Not shooting stuff.
    Rummage around here for head stamp ID. Headstamp Codes - International Ammunition Association
    No head stamp usually means it's not milsurp. ALL military's are and were identification crazy.
    Midway shows Norma 174 grain SP, 7.7 Jap at $39.99 per 20. Currently on Back order, of course. Graf's lists only hunting ammo too. 180 grain SP Made specifically for Graf's using Norma brass and Prvi bullets at $33.99 per 20. And Precision Cartridge brand, 150 grain SP, at $31.99 per 20.
    Dies etc are readily available too.
    The vast majority of WW2 Japaneseicon T92 and T99 7.7 ammo had no headstamp.
    One exception is Type 99 rounds attributed to the Tokyo Army Arsenal that have markings that looks sorta like (o), thought to denote experimental ammo.

  20. Thank You to vintage hunter For This Useful Post:


  21. #10
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    03:49 PM
    Quote Originally Posted by Sunray View Post
    No head stamp usually means it's not milsurp. ALL military's are and were identification crazy.
    Wrong as usual, I have an original clip of 7.7 and 6.5 also and neither have headstamps on any of them...nor markings on the clip.
    Regards, Jim

  22. Thank You to browningautorifle For This Useful Post:


+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. WW2 US surplus 30.06 ammo is it safe to shoot in a high number Rock Island 1903?
    By bcd8238 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 17
    Last Post: 01-30-2018, 02:04 PM
  2. Is a Lee Speed No1 Safe to shoot Mk7 Ammo in?
    By nattcmars in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 8
    Last Post: 11-26-2014, 07:16 AM
  3. Picked up a variety of Garand ammo.. Safe to shoot?
    By garrettbragg12 in forum Ammunition and Reloading for Old Milsurps
    Replies: 4
    Last Post: 12-24-2012, 10:19 AM
  4. Is it safe for me to shoot in my M1A?
    By colreed in forum M1 Garand/M14/M1A Rifles
    Replies: 2
    Last Post: 07-08-2010, 02:00 PM
  5. Safe to shoot?
    By garandfan1974 in forum M1 Garand/M14/M1A Rifles
    Replies: 13
    Last Post: 11-15-2009, 09:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks