+ Reply to Thread
Results 1 to 9 of 9

Thread: Winchester 1897 malfunctioning

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    CarrieD's Avatar
    Join Date
    Dec 2019
    Last On
    01-18-2020 @ 10:17 PM
    Location
    McKinney TX
    Age
    31
    Posts
    2
    Local Date
    03-29-2024
    Local Time
    08:51 AM

    Winchester 1897 malfunctioning

    I have an old Winchester 1897. C prefix, made in 1897. It's been giving me grief with feeding and is fast outstripping my patience with it, what with it resisting every single remedy I have tried. So far nobody has been able to help.

    When I run the action it will feed a shell into the lifter, but then when I close the action it spits out another shell into the air.
    To date I have adjusted the fit of the lifter acting on the cartridge stops, I have replaced the left cartridge stop and soon the right too. However nothing works.
    I frequently lose a full half my tube to these problems. I can only hope someone here can help, lest I find myself giving up on the damn thing and pitching it into the back of my safe to be forgotten.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 09:31 AM
    Location
    Victoria BC
    Posts
    29,839
    Real Name
    Jim
    Local Date
    03-29-2024
    Local Time
    07:51 AM
    Sometimes they're just plain worn out. I wouldn't have one any more because of the lack of parts available and too many possible breakdown points... Why not get a newer one or a different model?
    Regards, Jim

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member rcathey's Avatar
    Join Date
    Dec 2012
    Last On
    03-27-2024 @ 11:56 AM
    Location
    St. Louis, MO Area
    Posts
    1,645
    Local Date
    03-29-2024
    Local Time
    09:51 AM
    I’d have to agree. Unless of course this one has some great family or historical importance.

    Find an E model in good shape and it’ll outlast you. They’re fine firearms and as such they got USED. They can take it if you start with one in good shape.

    They’re not all that expensive, considering. $600 would but you a nice one.

  6. #4
    Legacy Member vintage hunter's Avatar
    Join Date
    Dec 2010
    Last On
    @
    Location
    S.C.
    Age
    56
    Posts
    1,680
    Local Date
    03-29-2024
    Local Time
    10:51 AM
    Debris behind the shell stops that impede their movement, worn stops and/or weak springs will cause such problems as you're having. Remove and clean the stops and the recesses in the reciever thoroughly. Look for excessive wear on the stops and/ or burrs or any roughness on the ends that would cause it to hang on the rim of the shell instead of sliding smoothly over it. A light stoning to polish the ends wont hurt, just dont get happy and remove too much. Be sure the hinge works freely and smoothly and isnt worn out. Also check spring tension to see that is sufficient to overcome any drag and fully extend the stops.

  7. #5
    Contributing Member NORTHOF60's Avatar
    Join Date
    Jun 2018
    Last On
    01-11-2022 @ 12:20 PM
    Location
    Scarborough, Ontario, Canada
    Posts
    272
    Local Date
    03-29-2024
    Local Time
    09:51 AM
    You didn't say what gauge the shotgun is, or shell length you are using. Have you verified the chamber length? If you try to chamber a 12 gauge 2.75 " shell into a short chamber, say 2.0", everything might look good on the outside, but the action will not lock properly (and yes, you can still fire it).
    Some do, some don't; some will, some won't; I might ...

  8. #6
    Legacy Member vintage hunter's Avatar
    Join Date
    Dec 2010
    Last On
    @
    Location
    S.C.
    Age
    56
    Posts
    1,680
    Local Date
    03-29-2024
    Local Time
    10:51 AM
    Quote Originally Posted by NORTHOF60 View Post
    You didn't say what gauge the shotgun is, or shell length you are using. Have you verified the chamber length? If you try to chamber a 12 gauge 2.75 " shell into a short chamber, say 2.0", everything might look good on the outside, but the action will not lock properly (and yes, you can still fire it).
    A C prefix will be a 12ga and all 12ga 1897's had 2 3/4" chambers.
    The 16ga was introduced with the E series in TD only, they had 2 9/16" chambers until the mid-late 20's, IIRC.

  9. #7
    Contributing Member NORTHOF60's Avatar
    Join Date
    Jun 2018
    Last On
    01-11-2022 @ 12:20 PM
    Location
    Scarborough, Ontario, Canada
    Posts
    272
    Local Date
    03-29-2024
    Local Time
    09:51 AM
    Many sources say the the Model 1897 12 gauge was available in both 2 3/4" and 2 5/8" chamber length until 1927, when the 2 3/4" chamber became standard.
    Some do, some don't; some will, some won't; I might ...

  10. #8
    Legacy Member vintage hunter's Avatar
    Join Date
    Dec 2010
    Last On
    @
    Location
    S.C.
    Age
    56
    Posts
    1,680
    Local Date
    03-29-2024
    Local Time
    10:51 AM
    Quote Originally Posted by NORTHOF60 View Post
    Many sources say the the Model 1897 12 gauge was available in both 2 3/4" and 2 5/8" chamber length until 1927, when the 2 3/4" chamber became standard.
    Yeah I know, I've read those "sources" too. Shotgun chambers dont have shoulders like most rifle/pistol chambers do so accurately measuring depth is tricky without the proper gages. Forcing cone length varies from one maker to the next and even guns made by the same company will have variances. All 12ga 97's were made with 2 3/4" chambers regardless of series early or late production. That was one of many improvements over the model 1893, which had 2 1/2" chambers, IIRC

    Go measure some 12ga 2 3/4" shells sometime, both live and fired. You'll find that all live 2 3/4" shells have an OAL of 2 1/4" give or take a 64th. Fired hulls will be somewhere between 2 5/8 to 2 11/16". This includes some 60's era paper 6 segment fold crimp shells.
    IIRC, paper roll crimp shells have a slightly longer loaded OAL than fold crimp but fired length is right in there with modern plastic hulls.
    All my 97's are pre war, the oldest made in 1905. It should, according to many sources have the short chamber. A live Remington 12ga 3" shell measures slightly over 2 3/4" in length. It will drop right in the chamber of the old 1905 E series TD and the bolt will go into battery just like it does on an empty chamber. It may have had the forcing cone lengthened at some point in time but I doubt it.
    Last edited by vintage hunter; 01-07-2020 at 07:55 AM. Reason: Correct a typo

  11. #9
    Contributing Member NORTHOF60's Avatar
    Join Date
    Jun 2018
    Last On
    01-11-2022 @ 12:20 PM
    Location
    Scarborough, Ontario, Canada
    Posts
    272
    Local Date
    03-29-2024
    Local Time
    09:51 AM
    I don't rely on fired or live ammunition - I have chamber gauges.
    Some do, some don't; some will, some won't; I might ...

+ Reply to Thread

Similar Threads

  1. 1897 Winchester What?
    By Rubicon2003 in forum Military Shotguns
    Replies: 2
    Last Post: 08-22-2018, 11:50 AM
  2. Winchester 1897 trench gun.
    By Anzac15 in forum Military Shotguns
    Replies: 6
    Last Post: 02-12-2017, 07:30 PM
  3. 1897 WINCHESTER ADVICE
    By Doco overboard in forum Military Shotguns
    Replies: 2
    Last Post: 11-23-2016, 04:22 PM
  4. Winchester 1897 advice?
    By nylo in forum Military Shotguns
    Replies: 8
    Last Post: 10-30-2016, 02:00 PM
  5. Malfunctioning Winchester
    By Harry aka Cowboy in forum M1 Garand/M14/M1A Rifles
    Replies: 9
    Last Post: 03-22-2010, 08:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks