+ Reply to Thread
Results 1 to 9 of 9

Thread: Value Of P14 With Volley Sights?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member P51Mustang's Avatar
    Join Date
    Jan 2020
    Last On
    12-20-2020 @ 09:58 AM
    Location
    NY
    Posts
    69
    Local Date
    03-28-2024
    Local Time
    07:36 AM

    Value Of P14 With Volley Sights?

    Hi,

    I have a P14 I have owned for close to 30 years. The rifle is as follows:

    ERA manufactured
    bolt and rear sight match receiver serial number
    blueing and wood at 90 percent
    Excellent bore
    Has rear and front volley sight

    What is something like this worth?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member Promo's Avatar
    Join Date
    Oct 2009
    Last On
    @
    Location
    Europe
    Posts
    1,842
    Local Date
    03-28-2024
    Local Time
    01:36 PM
    Is the rear sight also matching numbers? And is the bolt factory matching or force matched? You didn't state if blueing was factory original or reblued, just that it was excellent. And is your stock sanded, or is the IE in a circle marking perfectly visible?

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member P51Mustang's Avatar
    Join Date
    Jan 2020
    Last On
    12-20-2020 @ 09:58 AM
    Location
    NY
    Posts
    69
    Local Date
    03-28-2024
    Local Time
    07:36 AM
    Thread Starter
    Bolt and rear sight are matching. The cartouches are visable on the stock and the blueing is original at 90 percent.

  6. #4
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    05:36 AM
    Quite a few early ERA rifles seem not to have been converted or used much. There have been reports that something like the first 60,000 were condemned for active service due to QC issues, reputedly do with the heat-treating of the actions IIRC.

    Can't put my hands on "The U.S. Enfield" at the moment or I'd check.
    Last edited by Surpmil; 01-24-2020 at 01:34 AM.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  7. #5
    Legacy Member 728shooter's Avatar
    Join Date
    Dec 2014
    Last On
    03-06-2024 @ 04:39 PM
    Location
    South Florida
    Posts
    74
    Local Date
    03-28-2024
    Local Time
    07:36 AM
    Sold one of mine 6-7 years ago, also in very good condition, for around $450 IIRC, but did not have the volley sites. I also have one very similar to your description, wouldn't think of selling mine now for less than somewhere in the $750-$800 range (and I may be too low at that!) Pictures of yours would help, but based on your description, I would start high and see what offers you get. That is based on the market were I live, money could be higher or lower based on the actual condition. Have to remember; these rifles are getting harder & harder to find, especially with volley sights intact!

    --728shooter

  8. #6
    Contributing Member Atticus Thraxx's Avatar
    Join Date
    May 2020
    Last On
    10-14-2023 @ 09:51 AM
    Location
    Yolo County CA
    Age
    61
    Posts
    150
    Real Name
    GEORGE
    Local Date
    03-28-2024
    Local Time
    05:36 AM
    Surpmil, I went through my copy and couldn't find any mention of the 60,000 rejects from ERA. If you find it please let me know what page. The Americans really struggled to produce rifles of acceptable quality and part interchangability but eventually were able to produce I think I read 280 rifles per man, per day. Not bad. I should sit down and read this book in it's entirety.
    I have a lot more experience than expertise, still have both eyes and most of my fingers though.

  9. #7
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    05:36 AM
    If you've been through the book and didn't find the reference it probably isn't there and in that case I was mistaken in attributing it to that book. I'm afraid I can't say where the story came from if not from "The US Enfield". I don't think it can be Reynolds, though I do remember smiling at his sniffy remark about "the rather rough American rifle."
    On p. 59 of the US Enfield we find this:

    The first rifles turned out in 1916 were rejected by the Britishicon Inspection Department....the Inspectorate failed a large percentage of these early batches. Continued large scale rejection by the Inspectorate resulted in the American companies [that is all three presumably] refusal to continue the contracts at the quoted prices....Difficulties in meeting the required standards were encountered particularly by the Edddystone factory, and certain relaxations in the standards were permitted and extended to all the factories.
    So what happens to "rejected" rifles? Are they scrapped? Stripped for parts? Probably would depend on what they were rejected for.

    Obviously there were negotiations between the Inspectorate and the three manufacturers. Would it make any sense to scrap completed rifles when if they were "marked down" in price they could be used for training?

    Skennertonicon goes on to state that despite what the existing contracts assert, Eddystone was unable technically to ever produce any P14 bayonets that would pass inspection: "...one U.S. contractor failed so badly as to have to give up attempting the production altogether."

    The fact that two "trouble-shooters" were sent from Britain in October 1916 must show how long-standing the Q.C. problems were, as production had begun about six months earlier.

    Given that Eddystone produced 1.18 million rifles, I can well believe that 60,000 rifles might have been rejected (at least initially) or marked as DP or EY rifles.

    The assembly record for the P14 was 50 rifles a day. When the M17 entered production it miraculously shot up to over 250 rifles a day!

    There was lots of contract-padding as well says Skennerton.

    Over the years I've seen several Eddystone's in very good original condition marked D.P. As these had obviously not been through the Weedon "Repair" the logical conclusion is that they were marked that way from much earlier.

    If there is a definitive answer to this it is probably in whatever records of the Inspectorate survive, or the papers of those were members of the Inspectorate.

    The other possibility is that some early Eddystones were not downgraded to the point of being marked DP or EY, but were perhaps thought suspect enough that they were "put on the shelf" somewhere which might explain their untouched condition.
    Last edited by Surpmil; 06-28-2020 at 12:20 PM. Reason: Clarity
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  10. Thank You to Surpmil For This Useful Post:


  11. #8
    Contributing Member fjruple's Avatar
    Join Date
    Dec 2006
    Last On
    10-29-2023 @ 04:38 AM
    Location
    New Jersey, USA
    Posts
    1,021
    Real Name
    Franklin Ruple
    Local Date
    03-28-2024
    Local Time
    08:36 AM
    P51-- If the rifles has not been screwed with and numbers match, no sanding, no bubba, and letter parts match. It could well over $1,000.00 You did not indicate a serial number range or if the stock was a fat boy stock or not, pictures would help a lot in get a true determination of value.

  12. #9
    Contributing Member 303 Gunner's Avatar
    Join Date
    Dec 2018
    Last On
    03-24-2024 @ 09:20 PM
    Location
    Maine, United States
    Age
    34
    Posts
    181
    Real Name
    Joshua
    Local Date
    03-28-2024
    Local Time
    08:36 AM
    I have seen very nice Pattern '14's with volley sights sell for ~$2,000

+ Reply to Thread

Similar Threads

  1. Volley sights?
    By sdh1911 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 21
    Last Post: 09-26-2019, 12:17 AM
  2. How to take apart volley sights
    By WolfGolf96 in forum Milsurps General Discussion Forum
    Replies: 7
    Last Post: 06-04-2017, 01:51 PM
  3. Anyone one ever actually tried their Volley Sights?
    By AD-4NA in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 17
    Last Post: 05-23-2015, 01:13 PM
  4. P14 Volley Sights
    By gulliver62 in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 7
    Last Post: 01-08-2011, 09:21 AM
  5. No. 1 Mk III volley sights
    By nhetzer in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 07-26-2010, 02:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks