+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 23

Thread: No1 MkIII... I think?

Click here to increase the font size Click here to reduce the font size
  1. #11
    Legacy Member Brit plumber's Avatar
    Join Date
    Dec 2009
    Last On
    03-25-2024 @ 02:00 PM
    Posts
    1,807
    Local Date
    03-28-2024
    Local Time
    09:59 PM
    I used to think that such damage was unthinkable but as I’ve got older I’ve realised that most of this surplus was regarded as cheap and disposable in the past. They were regarded as tools by most and got treated as such.

    My 42 jeep was a reasonable restoration project but I couldnt figure out why someone would do the mods they did. But, those mods meant it was being used and is probably the reason it exists today. I hate to say it but sometimes bubba is needed to keep some of these veterans going.

  2. The Following 2 Members Say Thank You to Brit plumber For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #12
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Today @ 11:11 AM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-28-2024
    Local Time
    09:59 PM
    Quote Originally Posted by Brian Dickicon View Post
    It's a Santa Fe Arms 1960's conversion of an SMLE to a so-called "Jungle carbine". They used a modified Mk.2 rear sight from a No.4 and the axis pin/screw is a sear screw from the SMLE. They butchered tons of them.
    Did the Santa Fe arms examples originally come from the huge Parker Hale/ Interarms buy Brian?

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #13
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Today @ 02:10 PM
    Location
    Edgefield, SC USA
    Posts
    4,040
    Local Date
    03-28-2024
    Local Time
    04:59 PM
    I really don't know but since it was well prior to 1968, there's a pretty good chance the majority were imported by Interarms. They managed to buy the vast majority of the war reserve No.4's in the 1980's from both the UK Mod and South Africans. I used to get a chuckle listening to all the exspurts at gun shows poo-poo them because they were import marked, (post 1968). The fact remains that the majority of No.4 service rifles released prior to 1968 were culled because something failed the gauging standards. They usually sported Britishicon commercial proofs too which no one ever complained about. Go figure.

  7. #14
    Legacy Member Tromas's Avatar
    Join Date
    Apr 2018
    Last On
    04-27-2021 @ 09:23 PM
    Location
    Forth Worth, Texas
    Posts
    7
    Local Date
    03-28-2024
    Local Time
    03:59 PM
    Thread Starter

    Thank you

    Well, I have finished my project rifle. All in all I am very happy with it, it certainly isnt as nice as an origional no1 would be, but I think it is a lot better than it was from when I bought it, and most importanly, its in shootable condition now. The front upper handgaurd is either a new piece or unsed, so it doesnt match the other pieces exactly in color, but it is close. It was one of the only ones I could find that still had the narrow parts that go around the rear site block, most hand gaurds for sale had them broken off. I never was able to find a charging guide, so I cut a piece of square tube to length, welded it in place, and filed the weld flush. Not the most ideal solution, but I like it better than haveing a charging bridge that is cut into two pieces. All in all, I have 500 to 600 in it for the rifle and parts, which is not to much more than I see them going for down here. Thanks to everyone here that helpt to answer my previous questions, I really enjoyed this project.
    Attachment 107408

  8. The Following 7 Members Say Thank You to Tromas For This Useful Post:


  9. #15
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:59 PM
    Looks presentable now, thanks for coming back and finishing up this thread...showing us the rifle after.
    Regards, Jim

  10. #16
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    03:59 PM
    Looks really good to me! Most of those rifles didn't survive as "original" so yours just has a new "experience." It still has its history, but with a few new parts. If you wanted it be more original, you could swap out the cocking piece for the rounded version which would be more "original" for that model.Enjoy shooting and sharing it!

  11. #17
    Legacy Member lithgow1918's Avatar
    Join Date
    Mar 2020
    Last On
    02-13-2024 @ 05:34 PM
    Location
    America
    Posts
    65
    Local Date
    03-28-2024
    Local Time
    04:59 PM
    Quote Originally Posted by Singer B View Post
    Looks really good to me! Most of those rifles didn't survive as "original" so yours just has a new "experience." It still has its history, but with a few new parts. If you wanted it be more original, you could swap out the cocking piece for the rounded version which would be more "original" for that model.Enjoy shooting and sharing it!
    Sorry for the newbie questions, but when was the squared cocking piece introduced? I see English smles with the rounded version dated later than Australianicon smles that have the squared one. I understand they may be mixed, but I'm still curious to know.

  12. #18
    Legacy Member BurtonP's Avatar
    Join Date
    Oct 2019
    Last On
    03-13-2024 @ 07:08 PM
    Location
    Calgary
    Posts
    214
    Local Date
    03-28-2024
    Local Time
    02:59 PM
    Hi Tromas,

    I love the work you've done to the rifle. Definitely a huge improvement, and well worth the effort IMO, even if it can be expensive. You may have seen my post about a similar "un-economic" No 5 carbine restoration. With that in mind, do you still have the Santa-Fe flash hider from your rifle? If so, would you sell it?
    Cheers,
    Burton

  13. #19
    Legacy Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    Today @ 04:54 AM
    Location
    Brisbane
    Posts
    2,237
    Local Date
    03-29-2024
    Local Time
    06:59 AM
    The "model" marking is interesting, as well.

    My old eyes see what looks like a "equals" sign after the "lll".

    That would suggest that this is one of the Mk lll* rifles that were re-graded to proper Mk lll spec. by putting all the "fruit" back on and striking out the "*". This apparently happened in the 1920's.

    Any other ideas out there?

  14. Thank You to Bruce_in_Oz For This Useful Post:


  15. #20
    Legacy Member Bindi2's Avatar
    Join Date
    May 2008
    Last On
    Today @ 09:18 AM
    Location
    Western Australia
    Posts
    1,446
    Local Date
    03-29-2024
    Local Time
    04:59 AM
    The only fruit put back on was the cutoff

+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast

Similar Threads

  1. No1 MKIII or MKIII* pattern?
    By peval65 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 04-18-2016, 03:10 PM
  2. What is the difference between a MkIII* and a MkIII?
    By EnfieldNutt84 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 8
    Last Post: 06-11-2010, 11:09 PM
  3. My MKIII
    By patriot76 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 04-28-2010, 11:09 AM
  4. $9.59 No1 MKIII
    By wallyss in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 10
    Last Post: 01-07-2010, 02:25 PM
  5. What can you tell me about this No1 MkIII?
    By Baal in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 17
    Last Post: 12-19-2009, 02:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks