+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19

Thread: Can you look this century FAL R1A1 over for me?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Fruler's Avatar
    Join Date
    Apr 2019
    Last On
    08-23-2023 @ 01:03 AM
    Location
    Missouri, north America.
    Posts
    92
    Local Date
    03-28-2024
    Local Time
    10:05 AM

    Can you look this century FAL R1A1 over for me?

    What do you guys think of the century R1a1? There's on for sale in my area for around $750 I think. I believe this is a ban era FAL... There's no flash hider.

    Can you please look over these photos and see if you can notice anything wrong?

    Some questions I have... That maybe you guys could answer.
    1.) Is the barrel on this FAL correct mil spec diameter? It looks heavy to me, but I could be wrong.

    2.) Is the barrel when installed to the rifle surplus of newly made? I'm not sure if century used surplus barrels... Hopefully not.

    3.) Any complaints at all about the century R1A1?

    4.) What would you pay for a rifle in this condition, knowing that you would have to get the barrel threaded for a flash hider? What would be a reasonable offer?

    Thanks guys.
    I appreciate any help I can get... The guy selling lives 45 minutes away from me... I want to be sure it's worth my times driving that far. Thanks again.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    I own a bunch of milsurp but a few of my favorites are my Lithgow smle 1942, Argentine 1909 engineer Mauser carbine and my newest favorite, my Swiss K11... It's a special rifle with a troop tag and the most accurate I own.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member tr63's Avatar
    Join Date
    Jan 2013
    Last On
    02-05-2022 @ 08:25 AM
    Location
    maine U.S.A.
    Posts
    404
    Real Name
    john senesy
    Local Date
    03-28-2024
    Local Time
    10:05 AM
    Has the barrel a lug on it ? If it has it is G1 barrel and it was never threaded in the first Place . You need to take some side pictures of the end of the barrel and post them . The receiver is made by Century and considered by many not the best . If it operates and you can get 2 to 3 inch groups at 100 yards that's normal .

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Paul S.'s Avatar
    Join Date
    Mar 2009
    Last On
    04-08-2020 @ 06:58 PM
    Location
    Back and forth between Sydney and Southern California
    Posts
    1,594
    Local Date
    03-28-2024
    Local Time
    09:05 AM
    My memory of events Century Arms is that they used surplus rifle kits on their receivers to build the rifles. The biggest difference was the cuts for the safety sear that US BATF deemed made the rifle a full auto. Flash-hiders were sawn off and the barrels re-crowned. That was to meet some individual US state requirements. The barrels were the same ones that came with the kits. Initially, there were feeding problems with receivers used with the ex-Commonwealth L1A1 kits. This was resolved when Century changed suppliers. My memory is that the chronological order of production was Australianicon and Britishicon kits first, followed by the Austrians, and then South Africans. Last up were some Indian kits, but that didn't go well.

    Quite honestly, I personally miss the entrepreneurial adventurism that was the life and soul of Century Arms.

    ADDED COMMENT: I had one for their rifles built early on with a British kit. I never had a problem with it. I passed it on to one of my sons, and he still has it, and loves it.
    Last edited by Paul S.; 02-13-2020 at 08:25 PM.

  6. #4
    Legacy Member Fruler's Avatar
    Join Date
    Apr 2019
    Last On
    08-23-2023 @ 01:03 AM
    Location
    Missouri, north America.
    Posts
    92
    Local Date
    03-28-2024
    Local Time
    10:05 AM
    Thread Starter
    There is no lug on the barrel. Being a ban era weapon it shouldn't have one, if memory serves me right.
    I own a bunch of milsurp but a few of my favorites are my Lithgow smle 1942, Argentine 1909 engineer Mauser carbine and my newest favorite, my Swiss K11... It's a special rifle with a troop tag and the most accurate I own.

  7. #5
    Legacy Member tr63's Avatar
    Join Date
    Jan 2013
    Last On
    02-05-2022 @ 08:25 AM
    Location
    maine U.S.A.
    Posts
    404
    Real Name
    john senesy
    Local Date
    03-28-2024
    Local Time
    10:05 AM
    The parts used look to be metric not Brit. or Austrian .The Century made receiver devalues the rifle . If it operates with out any issues any the bore is very good or better the value maybe $650.00 to $800.00 . To add a treaded flash hider may run you $150.00 or more . You can pick up a DSA built FAL. rather than mess around with this one unless you can buy it for $500.00 or less .
    Last edited by tr63; 02-14-2020 at 12:23 AM.

  8. #6
    Legacy Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 03:01 PM
    Location
    London, Ontario
    Posts
    1,053
    Local Date
    03-28-2024
    Local Time
    10:05 AM
    The issue with Century assembled FAL's is their use of parts bins with zero QC(just like the thousands of Lee-Enfields they assembled that had bad headspace.). Century FAL's are known for being assembled with a mixture of 'inch' and 'metric' parts that came out of said parts bins. That was the cause of a lot of the feeding issues. The parts didn't fit. Nobody can tell the difference from a picture.
    Personally, I would not touch any firearm Century had anything to do with.
    "...US BATF deemed made the rifle a..." They decided, without benefit of legislation, that "Once an MG, always an MG'. Then they exported that nonsense.
    Spelling and Grammar count!

  9. #7
    Legacy Member P51Mustang's Avatar
    Join Date
    Jan 2020
    Last On
    12-20-2020 @ 09:58 AM
    Location
    NY
    Posts
    69
    Local Date
    03-28-2024
    Local Time
    09:05 AM
    I agree with what others have said. What I remember hearing was a lot of QC issues and I would see how she runs. Once you see if she runs correctly and accurately you can better gauge a value.

  10. #8
    Legacy Member Fruler's Avatar
    Join Date
    Apr 2019
    Last On
    08-23-2023 @ 01:03 AM
    Location
    Missouri, north America.
    Posts
    92
    Local Date
    03-28-2024
    Local Time
    10:05 AM
    Thread Starter
    Thanks everyone who replied. I was on the fence, leaning more towards a no go... The seller ultimately wouldn't go down in price below $700. I called 3 LGS that do threading (there are more than 3 stores that would do it but I did all the calling I wanted.) and the average quoted price to get it threaded, was around $150-$200... That would put me near the $1000 dollar mark with tax, so I decided not to get it.

    The seller claims it's reliable but I've been lied to in the past from people I've bought rifles from. If the rifle didn't run right it may cost me just as much as a new DSA would, just trying to get it to run lol.

    Honestly, I just want a semi auto 308... Be it a PTR 91, DSA FAL, or a Springfield M1Aicon. It's taken me around 2 years to decide between those three rifles as to what I really want. I do like the longer barrels but a PTR 91 with an 18 inch barrel isn't too short... But I'd prefer the 21-22 inch barrels of the FAL or M1A to get the most out of the cartridge... I know 100 fps isn't a huge difference but there are many other reason why I prefer longer barrels.

    Thanks guys for you help, I do appreciate it.

  11. Thank You to Fruler For This Useful Post:


  12. #9
    Contributing Member
    bigduke6's Avatar
    Join Date
    Jul 2008
    Last On
    03-25-2024 @ 09:09 PM
    Location
    North West England,UK
    Posts
    3,279
    Local Date
    03-28-2024
    Local Time
    02:05 PM
    Any decent machine shop could thread a barrel in in seconds..... you can do it yourself with a die nut as long as you have a lathe etc (you don't need the lathe but helps tp keep things square.)

    For the initial price and if we could have just semi auto full bore, (we can have .22 RF in semi auto) I'd walk to pick it up..........

  13. #10
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:04 AM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    07:05 AM
    Quote Originally Posted by Fruler View Post
    Honestly, I just want a semi auto 308
    Why not just pull the trigger on a good M1Aicon? You can probably find one reasonable and with some sort of proof that it shoots. Parts are available at Brownell's.
    Regards, Jim

  14. Thank You to browningautorifle For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. R1A1 Break Down During Firing
    By bacarnal in forum FNFAL Rifles
    Replies: 11
    Last Post: 07-16-2015, 07:00 AM
  2. R1A1 Barrels
    By bacarnal in forum FNFAL Rifles
    Replies: 5
    Last Post: 02-05-2015, 11:15 PM
  3. Century Arms FN FAL
    By Mako275 in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 1
    Last Post: 02-18-2013, 11:18 PM
  4. A century old, and still going strong!
    By Patrick Chadwick in forum Range Reports - Show us how good you are!
    Replies: 4
    Last Post: 11-11-2011, 11:46 AM
  5. Information please IMBEL R1A1
    By stjohns in forum FNFAL Rifles
    Replies: 1
    Last Post: 09-18-2011, 10:50 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks