+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: very early Winchester P.14: * or non-*?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member Promo's Avatar
    Join Date
    Oct 2009
    Last On
    @
    Location
    Europe
    Posts
    1,842
    Local Date
    03-28-2024
    Local Time
    03:51 PM

    very early Winchester P.14: * or non-*?

    It fits quite good to the discussion in the other thread, but I got a Winchester P.14 last week that is very early being serial W3817. All serial numbers on receiver, bolt, barrel and rear sight (factory) match, the rifle does not bear any modern firing proofs. The barrel is thickly covered in grease, I did one additional picture prior to wiping off parts of the grease to picture the markings under it. Either the grease left a green cover on the barrel, or green paint was applied prior to greasing it, however there is something green visible on the barrel under the handguard.

    Secondly, the rifle does NOT have the star mark on the receiver nor on the bolt - as it should not have it from factory. However, there is a five pointed star on the extractor. Is this extractor marking "just" an early marking, or would it mean it got *-updated?

    Third, the stock of this rifle has the Weedon arsenal star mark on bottom (six pointed star) with the letter O under it for Skimin & Wood. The stock however also does have some examiner marks right behind the trigger guard. It however does NOT have nor appear to have had any IW (or IR or IE) markings on the butt which it usually should have, but the Maltese Cross is still visible. Additionally the very tip at the stock is marked "W&S" over 13 or 18.

    Does anyone know what W&S means? Could it be that early stocks didn't get the IW in a circle marking, since many other stamps are present and I can't really find any other explanation to that.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. Thank You to Promo For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:04 AM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    07:51 AM
    Nice looking old rifle, I'd make a stock marking disc rather than leave it. I know how now. Finding a cut brass screw would be the hardest part...
    Regards, Jim

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Contributing Member Promo's Avatar
    Join Date
    Oct 2009
    Last On
    @
    Location
    Europe
    Posts
    1,842
    Local Date
    03-28-2024
    Local Time
    03:51 PM
    Thread Starter
    These parts are available as reproductions, complete with screw at 8 GBP here: lee enfield smle butt disc and screw REPRODUCTION | eBay . I think I have some spare of these around, but didn't find any time yet to check my parts. This is just a detail, nothing I'm too worried.

  7. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 10:04 AM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    07:51 AM
    That screw is about twice the length...needed. They only used a short screw with no shank to speak of. Anyway, like you say a detail.
    Regards, Jim

  8. #5
    Legacy Member bros's Avatar
    Join Date
    Jan 2011
    Last On
    Yesterday @ 04:03 AM
    Location
    yukon
    Posts
    272
    Local Date
    03-28-2024
    Local Time
    07:51 AM
    Promo.......that is a beautiful rifle and yeah a real early number. I'm not going to comment on the rest as the more I read, I realize the less I know......and I've put my foot in my mouth a few times.

  9. #6
    Legacy Member Kiwi's Avatar
    Join Date
    Aug 2010
    Last On
    05-27-2023 @ 06:40 AM
    Location
    Queenstown, New Zealand
    Age
    46
    Posts
    243
    Real Name
    Andrew
    Local Date
    03-29-2024
    Local Time
    02:51 AM
    Promo, a clue to to originality or otherwise of the stock can be found on the stock under the receiver. I have found that the various inspector stamping in the receiver and/or trigger guard leave an impression on the wood work over time. Do the stampings also match those impressed into the woodwork and if so, do they mirror each other? I think from memory there is a triangle stamp on Winchester receivers that can leave a pretty good impression in the stock.

    Regarding the star on the extractor, I have a bunch of spare extractors, some with and some without such star markings. I would suggest your extractor is a replacement in service (or out of service) that just happens to have the star marked on it. The presence of the star marked extractor does not make the rifle a Mk1* in my opinion.
    Last edited by Kiwi; 02-18-2020 at 10:53 PM. Reason: additional extractor comment

  10. #7
    Contributing Member #1oilman's Avatar
    Join Date
    Sep 2016
    Last On
    03-23-2024 @ 07:18 PM
    Location
    southern Ontario
    Posts
    253
    Local Date
    03-28-2024
    Local Time
    10:51 AM
    could the W&S have anything to do with English gun makers Webley and Scott? Were they possibly contracted to do inspections? Just a thought

  11. #8
    Contributing Member Promo's Avatar
    Join Date
    Oct 2009
    Last On
    @
    Location
    Europe
    Posts
    1,842
    Local Date
    03-28-2024
    Local Time
    03:51 PM
    Thread Starter
    Thanks for that tip, I'll remove the stock later today and check for any markings inside the barrel channel! I however noticed that the W stamp which usually is found on various parts of a P.14 rifle does not apply to this rifle. It seems to have been so early, it does not have any letter on any parts. And good comment of yours on the extractor, thank you for this!

    It might be a stupid idea, but I had already wondered the following ... per Skennertonicon "Skimin & Wood" outcarried the Weedon-Overhaul. What if during the overhaul they replaced the stock with their own stock and for whatever reason they used W&S as abbreviation for "Wood & Skimin", so the name mirrored?

  12. #9
    Legacy Member harry mac's Avatar
    Join Date
    Mar 2009
    Last On
    03-11-2024 @ 04:08 PM
    Location
    Norfolk, UK
    Posts
    470
    Local Date
    03-28-2024
    Local Time
    02:51 PM
    Quote Originally Posted by Kiwi View Post
    The presence of the star marked extractor does not make the rifle a Mk1* in my opinion.
    I'd go along with that.
    As for the absence of "IW" stamps on the stock; I seem to remember that Winchester rushed the rifles into production to try and get ahead of Remington. Could it be that the early ones weren't marked because there weren't any Remington (or Eddystone) rifles around to distinguish them from? (That is a complete SWAG).
    I'd say the rifle is a Mk1, not a Mk1*.

  13. #10
    Legacy Member charlieboy's Avatar
    Join Date
    Aug 2020
    Last On
    12-08-2022 @ 05:49 PM
    Location
    New Zealand
    Posts
    24
    Local Date
    03-29-2024
    Local Time
    03:51 AM
    Sorry to raise an oldish post, another way to check for MK1 or Mk1* is to look into the breech, down into the barrel, from the rear of the bolt raceway. On a * rifle you will see a cut onto the breech face that goes from about 10 o'clock around to 3 o'clock.
    Done to allow for the longer left hand lug on * rifles

  14. Thank You to charlieboy For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. a few early Winchester cartouches
    By RCS in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 04-16-2019, 01:07 PM
  2. Question on early P14 Winchester.
    By fjruple in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 3
    Last Post: 05-27-2017, 06:05 AM
  3. Early dovetailed plate, cover, locking bolt on Early Winchester Pattern 1914's
    By Kiwi in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 9
    Last Post: 10-31-2016, 08:48 PM
  4. Early all matching Winchester
    By lkgmadmax in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 5
    Last Post: 08-21-2015, 12:40 AM
  5. Need help valuing an early Winchester..
    By 590A1 in forum M1/M2 Carbine
    Replies: 10
    Last Post: 08-08-2010, 05:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks