+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: Ross Mk.III and Winchester A5

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Legacy Member Marksman's Avatar
    Join Date
    Apr 2009
    Last On
    10-28-2023 @ 02:58 PM
    Location
    United Kingdom: near Bisley
    Posts
    16
    Local Date
    03-28-2024
    Local Time
    10:21 PM

    Ross Mk.III and Winchester A5

    On a Ross Mk III set up for a Winchester A5, where exactly is the rear dovetail block fitted?

    If on the receiver ring, is it entirely on the larger rear part (nom. 1.5" dia), or partially on that rear part and partially on the smaller front part (nom.1.4" dia) with the dovetail block having a stepped base?

    Or is it partially on the front part of the receiver ring and partially on the cylindrical rear part of the barrel reinforce (nom. 1.3" dia), again using a dovetail block with a stepped base?

    Or is it partially on the cylindrical part of the barrel reinforce and partially on the tapered part, using a dovetail block with a base with a flat and a taper?

    None of the contemporaneous photos that I've found are sufficiently detailed, but I get the impression that the rear block is mounted in front of the larger diameter part of the receiver ring.
    Hope someone can help.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Contributing Member AGB-1's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2022 @ 05:41 PM
    Location
    Krugerville Texas
    Age
    84
    Posts
    344
    Local Date
    03-28-2024
    Local Time
    04:21 PM
    Maybe this image will help?

    https://bamfstyle.files.wordpress.co...gun3-rifle.jpg

    Search "Joe Kidd" guns used>

  3. Avoid Ads - Become a Contributing Member - Click HERE
  4. #3
    Legacy Member Marksman's Avatar
    Join Date
    Apr 2009
    Last On
    10-28-2023 @ 02:58 PM
    Location
    United Kingdom: near Bisley
    Posts
    16
    Local Date
    03-28-2024
    Local Time
    10:21 PM
    Thread Starter
    Thanks, but no help, as it shows a sporting rifle with the rear block on the rear bridge, where the aperture backsight would have been. Interesting set-up having the adjustment at the front end.

    I should perhaps have made it clear that I was after info. on CEF sniping rifles.
    Last edited by Marksman; 03-21-2020 at 11:25 AM.

  5. #4
    Contributing Member AGB-1's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2022 @ 05:41 PM
    Location
    Krugerville Texas
    Age
    84
    Posts
    344
    Local Date
    03-28-2024
    Local Time
    04:21 PM

  6. Thank You to AGB-1 For This Useful Post:


  7. #5
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    02:21 PM
    The Riel rifle shown clearly has a stepped base to go from the shoulder of the receiver ring to the barrel. The only criteria are the distance between the axes of the rings (and therefore bases) as that determines the movement of the scope in relation to the adjustment knobs, and the eye relief desired.

    I see there is at least one official photograph that shows a MkIII with the A5 scope removed. If a high resolution image of the photo was obtained, you might get more detail from that.

    A slot was cut through the handguard for the front base which seems to have been screwed directly to the barrel. Until an original in a museum is examined, we don't know whether the front base was simply a riser under a factory 3/8" dovetail, or was cut entirely from a steel bar. We don't know for certain where these rifles were set up, (except that it was at Canadianicon workshops in the UKicon and/or Franceicon), or if there was even a pattern to be followed. Field level workshops had enough machine tools to do such work easily.

    There is a Winchester company brochure on their scopes which gives the options for setting the distance between the bases depending on whether one wanted finer or coarser adjustment from the windage and elevation knobs.

    As an aside, one can see from the official photos how much variation there was in the size and equipment of the Scout & Sniper sections, depending no doubt on the interest and attitudes of the O.I.C. and the unit O.C. at any given time. The 2nd Battalion must have been at a low ebb when this photo was taken, compared to some others.

    The 67th Battalion looks very different.
    Last edited by Surpmil; 03-22-2020 at 01:34 AM.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  8. Thank You to Surpmil For This Useful Post:


  9. #6
    Contributing Member Ax.303's Avatar
    Join Date
    Dec 2010
    Last On
    Today @ 07:47 AM
    Location
    NW Ontario Canada
    Posts
    170
    Local Date
    03-28-2024
    Local Time
    04:21 PM
    The plaque from the butt of Paddy Riel`s rifle recently turned up.

    No rifle attached unfortunately.

  10. #7
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    02:21 PM
    Does the plaque show any signs of the reputed fire?
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  11. #8
    Legacy Member Melanie_Daniels's Avatar
    Join Date
    Oct 2008
    Last On
    03-25-2024 @ 04:35 AM
    Posts
    133
    Local Date
    03-28-2024
    Local Time
    04:21 PM

  12. #9
    Contributing Member Ax.303's Avatar
    Join Date
    Dec 2010
    Last On
    Today @ 07:47 AM
    Location
    NW Ontario Canada
    Posts
    170
    Local Date
    03-28-2024
    Local Time
    04:21 PM
    Quote Originally Posted by Surpmil View Post
    Does the plaque show any signs of the reputed fire?
    Plaque is in great shape. Story is it was in a second fire??

  13. #10
    Legacy Member Marksman's Avatar
    Join Date
    Apr 2009
    Last On
    10-28-2023 @ 02:58 PM
    Location
    United Kingdom: near Bisley
    Posts
    16
    Local Date
    03-28-2024
    Local Time
    10:21 PM
    Thread Starter
    Folks, thank you the superb info.

    As you probably guess, I'm planning on building up a recreation of a CEF sniping rifle. I will probably modify a set of blocks left over from a batch that I commissioned a good few years ago that reproduced what Winchester supplied to the USMC for M1903 before the Great War. The spacing on the M1903 was 7.2" which gives half minute graduations on the A5 rear mount, but with the rear block on the Ross being mounted relatively further forward, I think I may have to use a 6" spacing to keep the correct eye-relief.

    I'm self-isolating at the moment so spending some time trying to finalise plans on a host of projects (classic rifles and vintage cars) that have been hanging around for too long.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Ross with Winchester A5 telescope
    By Promo in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 09-04-2015, 01:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks