+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 25

Thread: Real or Fantasy Piece? No5 Help?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel Son's Avatar
    Join Date
    Oct 2006
    Last On
    03-26-2024 @ 07:30 AM
    Location
    On the right side of Australia, below the middle and a little bit in from the edge.
    Posts
    1,239
    Local Date
    03-29-2024
    Local Time
    10:39 AM

    Real or Fantasy Piece? No5 Help?

    I have came across this in another group, the poster claiming he saw it on the interweb.
    No end of google image searching has turned up a hit for any of the pics, so I am thinking it might be something he had made up and now looking for gratification.

    Over the years there have been a few workshops/ gunsmiths that have offered to turn your "old 303" into a thing of beauty by doing the whole skeletonised rifle bit, for a price of course. The SMLE skeletonised rifles one place near me did were a pretty good copy of the genuine, so I am thinking this might be a repro of something I don't think existed. Pity the barrel looks worn out, doesn't do it's credibility any favours.

    There is no writings I can find of the No5 being turned into a skeleton action (butt, bare action and about 9" of barrel) like all of the SMLE models over time and a few No4's done post WW2. Let alone a full length skeletonised rifle in the sense of the Lithgowicon made examples.

    Here are the pics of the No5 as posted and one of my skeletonised Lithgow as an example. As usual, happy to be proven wrong, but is it a fantasy piece??? Anyone got any clues?

    Attachment 106664Attachment 106665Attachment 106666Attachment 106667

    Attachment 106669
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Daan Kemp's Avatar
    Join Date
    Jan 2016
    Last On
    Today @ 06:54 AM
    Location
    Centurion RSA
    Age
    73
    Posts
    1,392
    Real Name
    Daan Kemp
    Local Date
    03-29-2024
    Local Time
    01:39 AM
    Not impossible, but doubtfull.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Bindi2's Avatar
    Join Date
    May 2008
    Last On
    Today @ 06:57 PM
    Location
    Western Australia
    Posts
    1,446
    Local Date
    03-29-2024
    Local Time
    07:39 AM
    Back in History there was a thread about one of these at a base over your way.

  6. #4
    Contributing Member
    Buccaneer's Avatar
    Join Date
    Mar 2011
    Last On
    Today @ 02:15 PM
    Location
    Cardiff Wales UK
    Posts
    472
    Real Name
    Paul Ellis
    Local Date
    03-28-2024
    Local Time
    11:39 PM
    I own a Maltby No4 Mk1 that was Skeletonized, and presented by REME armourers to "RSM (WO1) J Pettifar, Royal Fusiliers" I assume on his retirement. So I guess its perfectly possible that the No5 was done in a similar way.

  7. #5
    Contributing Member muffett.2008's Avatar
    Join Date
    Feb 2011
    Last On
    Today @ 05:27 PM
    Location
    Scone, NSW. Australia
    Posts
    2,163
    Real Name
    kevin muffett
    Local Date
    03-29-2024
    Local Time
    10:39 AM
    I can see two immediate advantages,
    1. Solved the wandering zero.
    2. It doesn't kick anymore.

    I remember seeing a pic of one in A.J Parkers gear.

  8. The Following 2 Members Say Thank You to muffett.2008 For This Useful Post:


  9. #6
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    03-20-2024 @ 06:05 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,429
    Real Name
    Roger Payne
    Local Date
    03-28-2024
    Local Time
    11:39 PM
    I really don't know, but someone has put a lot of work into creating it. From what I can see of the photo's it looks well executed. Are they worth THAT much that it'd be worth doing it just as a money (& perhaps kudos) making exercise? I ask genuinely out of curiosity as I've no idea what they fetch, & the value of the finished article is usually the prime motivational factor in doing these things.......unless as Paul says, it was done as a one-off presentation piece.

  10. #7
    Contributing Member
    Buccaneer's Avatar
    Join Date
    Mar 2011
    Last On
    Today @ 02:15 PM
    Location
    Cardiff Wales UK
    Posts
    472
    Real Name
    Paul Ellis
    Local Date
    03-28-2024
    Local Time
    11:39 PM
    I know that today is April fools day but I should like to point out that if this rifle were in the UKicon or even within the EU it would deemed to be "defectively deactivated" as it does not conform to the EU directives, and yes there are more than one each more absurd than the one before, you just could not dream it up but the bureaucrats in Brussels managed it...

  11. #8
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 12:25 PM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    11:39 PM
    Quote Originally Posted by Roger Payneicon View Post
    I really don't know, but someone has put a lot of work into creating it. From what I can see of the photo's it looks well executed. Are they worth THAT much that it'd be worth doing it just as a money (& perhaps kudos) making exercise? I ask genuinely out of curiosity as I've no idea what they fetch, & the value of the finished article is usually the prime motivational factor in doing these things.......unless as Paul says, it was done as a one-off presentation piece.
    There are frequently examples at an auction I regularly attend - they now generally make around £150 + 25% buyers premium.
    I picked on up at the Auction a few years ago for £30 missing bolt and trigger guard, (soon replaced).

    ---------- Post added at 06:04 PM ---------- Previous post was at 06:00 PM ----------

    Quote Originally Posted by Buccaneer View Post
    I know that today is April fools day but I should like to point out that if this rifle were in the UKicon or even within the EU it would deemed to be "defectively deactivated" as it does not conform to the EU directives, and yes there are more than one each more absurd than the one before, you just could not dream it up but the bureaucrats in Brussels managed it...

    I'm sure I remember Peter Laidlericon representing (as an expert witness) someone who was accused of having an unlicensed / improperly deactivated SKN rifle - if I remember correctly the final decision was if it had an SKN serial number it was originally built as a non-functioning firearm so the law did not apply, if it did not have an SKN then it was converted from a live firing rifle and the laws applied.

    That's how I remember it, maybe others know differently.
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  12. #9
    Contributing Member
    Buccaneer's Avatar
    Join Date
    Mar 2011
    Last On
    Today @ 02:15 PM
    Location
    Cardiff Wales UK
    Posts
    472
    Real Name
    Paul Ellis
    Local Date
    03-28-2024
    Local Time
    11:39 PM
    Quote Originally Posted by Alan de Enfield View Post
    I'm sure I remember Peter Laidlericon representing (as an expert witness) someone who was accused of having an unlicensed / improperly deactivated SKN rifle - if I remember correctly the final decision was if it had an SKN serial number it was originally built as a non-functioning firearm so the law did not apply, if it did not have an SKN then it was converted from a live firing rifle and the laws applied.

    That's how I remember it, maybe others know differently.
    I know that this has been aired on many occasions but since then the EU has issued three different directives regarding deactivating firearms. The first instructing even deactivated firearms to be "deactivated" again to bring them up to what they considered to be their new specification, the second some 18 months later then said that their first attempt at a new "deactivation" was not good enough so they had to be worked on yet again so that the only part that moved was the trigger and that was not allowed to be in contact with any other part. Now we come to the really good part having turned a deactivated gun into nothing more than a piece of welded up metal and wood which could only be used as a club you now have a legal requirement to register it with someone, in the UKicon I think it is the home office, the fact that you actually own this totally useless piece of wood and metal.
    The rifle in the original post could be owned by someone here in the UK but it would be illegal to sell, give, lend or dispose of it in any way except by handing it into the police or possibly giving it to a museum unless it had been brought up to the current EU specification including welding a rod into what is left of the barrel and welding all of the other parts in place.
    Out of a matter of interest I took my sectioned / skeletonized No4 to the Birmingham proof house several years ago when the first directive came out to find out if it could be considered to be deactivated as just like the No5 in this post it was obviously way beyond the ability to discharge any form of projectile, I was told that unless the deactivation conformed to the then EU directive then it would still classed as "defectively deactivated" and I would be breaking the law if I tried to dispose of it.
    Indecently I bought it many years ago at an auction but it had to be sold as a section 1 firearm even then as it did not have any form of certification to state that it was deactivated and the auction house quite correctly insisted that it had to entered onto my FAC where it still occupies a slot today.
    We seem to live in a mad world and with the onset of Covid 19 its become even more so. Stay safe all of you and hopefully at some point we will pop out of the other end of it all a bit older and a damn sight wiser...

  13. #10
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Today @ 11:11 AM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-29-2024
    Local Time
    12:39 AM
    Quote Originally Posted by Buccaneer View Post
    I know that this has been aired on many occasions but since then the EU has issued three different directives regarding deactivating firearms. The first instructing even deactivated firearms to be "deactivated" again to bring them up to what they considered to be their new specification, the second some 18 months later then said that their first attempt at a new "deactivation" was not good enough so they had to be worked on yet again so that the only part that moved was the trigger and that was not allowed to be in contact with any other part. Now we come to the really good part having turned a deactivated gun into nothing more than a piece of welded up metal and wood which could only be used as a club you now have a legal requirement to register it with someone, in the UKicon I think it is the home office, the fact that you actually own this totally useless piece of wood and metal.
    The rifle in the original post could be owned by someone here in the UK but it would be illegal to sell, give, lend or dispose of it in any way except by handing it into the police or possibly giving it to a museum unless it had been brought up to the current EU specification including welding a rod into what is left of the barrel and welding all of the other parts in place.
    Out of a matter of interest I took my sectioned / skeletonized No4 to the Birmingham proof house several years ago when the first directive came out to find out if it could be considered to be deactivated as just like the No5 in this post it was obviously way beyond the ability to discharge any form of projectile, I was told that unless the deactivation conformed to the then EU directive then it would still classed as "defectively deactivated" and I would be breaking the law if I tried to dispose of it.
    Indecently I bought it many years ago at an auction but it had to be sold as a section 1 firearm even then as it did not have any form of certification to state that it was deactivated and the auction house quite correctly insisted that it had to entered onto my FAC where it still occupies a slot today.
    We seem to live in a mad world and with the onset of Covid 19 its become even more so. Stay safe all of you and hopefully at some point we will pop out of the other end of it all a bit older and a damn sight wiser...
    It's a curious thing, sectioned firearms are such a grey area.

    My view is 'deactivated by other means'

    I have a collection of them, all comprehensively sectioned, totally safe and not one capable of even discharging a fart!

    All pressure baring parts are effectively deactivated by sectioning and as an additional measure, all bolt faces champhered.

    Before I bought my first example I sounded out my Police firearms team and their view was sectioned firearms arn't an issue to own off ticket, provided I bought them from an RFD and made absolutely sure no pressure baring parts are reusable in advance.

    So due diligence really.

    Other police forces may vary....

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. A real piece of history
    By Buccaneer in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 23
    Last Post: 06-15-2021, 06:06 AM
  2. More fantasy
    By Boonie Stomper in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 11-29-2017, 09:36 AM
  3. Desk piece miniature Mark 48 torpedo real ?
    By Rich 17 in forum Commercial Auction and Sale "Gossip"
    Replies: 5
    Last Post: 05-27-2015, 05:00 AM
  4. Fantasy Carbine
    By emmagee1917 in forum M1/M2 Carbine
    Replies: 3
    Last Post: 11-09-2011, 04:42 PM
  5. fantasy trench gun
    By Mark Baker in forum Military Shotguns
    Replies: 2
    Last Post: 11-28-2009, 10:18 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks