+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 21

Thread: New Remington Pattern 14 - PICS

Click here to increase the font size Click here to reduce the font size
  1. #11
    Contributing Member thrawnformbi's Avatar
    Join Date
    Nov 2019
    Last On
    03-26-2024 @ 07:39 AM
    Location
    New York
    Posts
    52
    Local Date
    03-28-2024
    Local Time
    09:54 PM
    Thread Starter
    Fascinating history. Appreciate you both taking the time to share all of that information.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #12
    Legacy Member 22SqnRAE's Avatar
    Join Date
    Feb 2017
    Last On
    09-27-2023 @ 11:49 PM
    Location
    Brisbane - the middle of right side of Oz
    Posts
    304
    Local Date
    03-29-2024
    Local Time
    11:54 AM
    Well done fjruple! Great expansion.

    I'll stick with a central theme, that without Remington as an established, equipped and knowledgeable arms manufacturer, the Eddystone subsidiary would have not flown. Technically, Eddystone was separate, but practically the smarts, capability and management came from the Parent company. But learning a little more about its history beyond just the WWI contracts is great!

    I'll draw a similarity of the exercise of the Eddystone plant establishment by Remington, with that of the Australianicon Small Arms Factory Lithgow being established by cooperation and observation of the RASF Enfield. And, we did it with US made Pratt and Whitney machinery, too. (And that in itself adds another intriguing misalignment between English speaking countries all using a different datum!)

    I've not heard anybody talking about ERA rifles produced by the Remington factory in Delaware. That's a new one to me. In intriguing wander down one of Alice's rabbit burrows that...

    The detailed description of how the Baldwin Loco works was used and changed is insightful. As you rightly point out, the Loco Company was shrewd in getting others to pay for expansions, which they sold off in any case.

    Out of interest, the manufacturing equipment that went to RIA, are you aware of what become of that in later years? Was it established again for WWII? Much of the equipment would have been fine for building the M1903A3 and other weapons. The specific tools and gauges for the Patt 14 and M1917 wouldn't have been of much use.
    Last edited by 22SqnRAE; 04-09-2020 at 10:08 PM.
    Trying to save Service history, one rifle at a time...

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #13
    Contributing Member fjruple's Avatar
    Join Date
    Dec 2006
    Last On
    10-29-2023 @ 04:38 AM
    Location
    New Jersey, USA
    Posts
    1,021
    Real Name
    Franklin Ruple
    Local Date
    03-28-2024
    Local Time
    09:54 PM
    I wanted to just further clarify several of your comments. See comments below: I put my comments in BOLD so you can more easily see them from the rest of the thread.

    Quote Originally Posted by 22SqnRAE View Post
    Well done fjruple! Great expansion.

    I'll stick with a central theme, that without Remington as an established, equipped and knowledgeable arms manufacturer, the Eddystone subsidiary would have not flown. Technically, Eddystone was separate, but practically the smarts, capability and management came from the Parent company. But learning a little more about its history beyond just the WWI contracts is great! While Remington did have input into the production by Eddystone. One of the driving factors was in the person of Colonel (later General) John T. Thompson who worked in US Army Ordnance before retiring. He helped establish the production factilities at Eddystone. After the US entered the war, in April 1917, he was recalled to active duty promoted to Brig. Gen. and headed up the US Rifle Board which made major decisions on the production of Model of 1917 which he named. Gen. John T. Thompson would go on to develop the Trench Broom and his name sake, the Thompson Submachinegun

    I'll draw a similarity of the exercise of the Eddystone plant establishment by Remington, with that of the Australianicon Small Arms Factory Lithgow being established by cooperation and observation of the RASF Enfield. And, we did it with US made Pratt and Whitney machinery, too. (And that in itself adds another intriguing misalignment between English speaking countries all using a different datum!) I believe the Britishicon Empire was still using the inch system of measurement until the 1950 or 60's when they switch to metric. Pratt and Whitney at the time was a major supplier of machine tools for ordnance.

    I've not heard anybody talking about ERA rifles produced by the Remington factory in Delaware. That's a new one to me. In intriguing wander down one of Alice's rabbit burrows that... Actually there was no production facilities in Delaware. New Corporations are generally established in the State of Delaware since it is a corporate tax haven. The companies then register with the States location, Eddystone, PA as a "foreign" corporation thus avoiding the local state's corporate taxes.

    The detailed description of how the Baldwin Loco works was used and changed is insightful. As you rightly point out, the Loco Company was shrewd in getting others to pay for expansions, which they sold off in any case.

    Out of interest, the manufacturing equipment that went to RIA, are you aware of what become of that in later years? Was it established again for WWII? Much of the equipment would have been fine for building the M1903A3 and other weapons. The specific tools and gauges for the Patt 14 and M1917 wouldn't have been of much use. At the end of production specific tools, gauges and any spare parts from the Pattern 1914 rifle production was returned to the British government. The US Government purchased all of the usable machine tools and equipment from the British Government for pennies on the dollar for the Production of the Model of 1917. After the war, production at all three manufacturers were continued to use of existing parts until early 1919. In the case of Eddystone eveything was shipped to RIA for storage. At the time the US Ordnance Department was considering adoption of the Model of 1917 as the Standard rifle of the US Army with the Springfield M1903 as the limited standard. Then self preservation took hold as the M1903 was produced by the US Ordnance Department and if they adopted the M1917 which can be subcontracted out the Ordnance Department would lose their cash cow. The US Army decided through several rather poor excuses to make the M1917 a limited standard. After the war there were several major rebuild M1917 programs before the rifles were put in long term storage. The M1917 was not ungraded as the Ordnance wanted to save money and was looking next for the semi-automatic combat rifle which would be the M1icon Garand. Machinery not used was probably sold on the surplus market or convert for other uses. as an additional side note Remington had so many parts left over from the M1917 production they modified the existing parts and sold commercial sporting rifle as the Model 30 for quite a years after production of the M1917 halted.

  6. Thank You to fjruple For This Useful Post:


  7. #14
    Legacy Member Mk VII's Avatar
    Join Date
    Dec 2008
    Last On
    03-20-2024 @ 07:30 PM
    Location
    England
    Age
    62
    Posts
    1,406
    Real Name
    James West
    Local Date
    03-29-2024
    Local Time
    01:54 AM
    Quote Originally Posted by 22SqnRAE View Post
    Out of interest, the manufacturing equipment that went to RIA, are you aware of what become of that in later years? Was it established again for WWII? Much of the equipment would have been fine for building the M1903A3 and other weapons. The specific tools and gauges for the Patt 14 and M1917 wouldn't have been of much use.

    The BAR tooling retained from WW1 turned out to to be of very little value when production resumed in WW2 as production engineering (and in particular the introduction of high speed steel) had changed so much in twenty years.

  8. #15
    Contributing Member thrawnformbi's Avatar
    Join Date
    Nov 2019
    Last On
    03-26-2024 @ 07:39 AM
    Location
    New York
    Posts
    52
    Local Date
    03-28-2024
    Local Time
    09:54 PM
    Thread Starter

    Pattern 14 Marking ID

    Does anyone recognize this faint marking near the stock disc?

    Attachment 107616

  9. #16
    Legacy Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    Today @ 04:54 AM
    Location
    Brisbane
    Posts
    2,237
    Local Date
    03-29-2024
    Local Time
    11:54 AM
    An associated problem that arose with Lithgowicon No1 productions was the spectre of the "Pratt and Whitney Inch", as opposed to the "Enfield Inch".

    The entire Lithgow production plant, tooling and gauging were manufactured by Pratt and Whitney. When the first rifles rolled off the line at Lithgow, samples were sent to Britainicon for "evaluation" and this is where the fun started. Whilst the lithgow rifles were pretty much interchangeable among themselves, there were "issues" once the Enfield gauges came out.

    There used to be a chart at the Lithgow factory that showed a graphic representation of the difference: it was tiny, but with tolerance "stacking", problems could arise. Those early Lithgow rifles were built SLOWLY, at first, on brand new machines, using brand-new fixtures, tooling and gauging. ONE factory; ONE product, (two if you count the bayonet). And all to the Pratt and Whitney Inch!

    What I found interesting is that when the US contractors tooled up for the P-14, it was with all the weird "Enfield" thread sizes and forms that had been designed into the P-13. All this occurred just scant years after the US had settled on a series of "standardized" threads and metrology standards across industries. The burgeoning car-building business had a lot to do with that.

  10. #17
    Legacy Member Kiwi's Avatar
    Join Date
    Aug 2010
    Last On
    05-27-2023 @ 06:40 AM
    Location
    Queenstown, New Zealand
    Age
    46
    Posts
    243
    Real Name
    Andrew
    Local Date
    03-29-2024
    Local Time
    01:54 PM
    Quote Originally Posted by thrawnformbi View Post
    Does anyone recognize this faint marking near the stock disc?

    Attachment 107616
    Its a indian army unit/armourers marking. See them bit on ex indian rifle stocks.

  11. #18
    Contributing Member fjruple's Avatar
    Join Date
    Dec 2006
    Last On
    10-29-2023 @ 04:38 AM
    Location
    New Jersey, USA
    Posts
    1,021
    Real Name
    Franklin Ruple
    Local Date
    03-28-2024
    Local Time
    09:54 PM
    Quote Originally Posted by Mk VII View Post
    The BAR tooling retained from WW1 turned out to to be of very little value when production resumed in WW2 as production engineering (and in particular the introduction of high speed steel) had changed so much in twenty years.
    Mk VII -- Quite true. The US military found that out early just before our involvement in WWII (1941). When the UKicon requested arms from the US besides the Model of 1917 rifle (the red stepdaughter of US Ordnance), the early BAR Model of 1918 automatic rifles and Browning Model 1917 Machineguns were provided to the UK as they were obsolete and surplus to US needs. The US Army wanted newer designs and upgrades to these weapons.

  12. #19
    Contributing Member thrawnformbi's Avatar
    Join Date
    Nov 2019
    Last On
    03-26-2024 @ 07:39 AM
    Location
    New York
    Posts
    52
    Local Date
    03-28-2024
    Local Time
    09:54 PM
    Thread Starter
    Quote Originally Posted by Kiwi View Post
    Its a indian army unit/armourers marking. See them bit on ex indian rifle stocks.
    Cheers Kiwi! It did remind me of the S^A stamp I've seen on Ishapore 2a's. Looks like it was checked over in 62. The barrel is marked '16 yet shows very very little use so maybe I got lucky with how it was treated over there. Coming from a month of cleaning out a horrendous Ishapore bore, this surprised me.

    Another question for you all. Was it common for P14's to have a mismatched makers between bolt and receiver. My receiver/barrel is a Remington but the bolt is marked E for Eddystone. I understand there were all sorts of interchangeability issues so just wanted to make sure this was an appropriate swap so long as headspace checks out.

    Now to find a 303 Field gauge....

  13. #20
    Contributing Member thrawnformbi's Avatar
    Join Date
    Nov 2019
    Last On
    03-26-2024 @ 07:39 AM
    Location
    New York
    Posts
    52
    Local Date
    03-28-2024
    Local Time
    09:54 PM
    Thread Starter
    Im curious if a bolt should close on a spent casing. I took a 303 shell and fit into the chamber and tried to close the bolt but it wont budge. Is there something about a casing without the bullet that makes a bolt unable to close on it?

+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast

Similar Threads

  1. Remington Pattern 14 canted front sight
    By chexquest87 in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 53
    Last Post: 09-12-2019, 08:35 AM
  2. British Pattern 1914 Remington low serial number 00902
    By breakeyp in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 20
    Last Post: 04-05-2018, 12:14 PM
  3. Some pics of my Remington P14.
    By Buster95 in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 14
    Last Post: 01-01-2017, 04:05 PM
  4. Old Pics from the Pattern Rooms
    By Simon in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 7
    Last Post: 02-20-2014, 07:50 AM
  5. Pics of .22 rf converted Pattern 1914 Remington
    By breakeyp in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 09-05-2010, 08:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks