+ Reply to Thread
Results 1 to 8 of 8

Thread: Dreyse Restoration

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member bombdoc's Avatar
    Join Date
    Aug 2012
    Last On
    03-14-2024 @ 05:12 PM
    Location
    UK
    Posts
    170
    Local Date
    03-28-2024
    Local Time
    11:30 AM

    Dreyse Restoration

    Firstly my apologies for thread absence.. I lost my login, and various other minor disasters.. however back up an running..

    I thought I would post this up as a restoration project, and let you see what I have been doing to maintain my sanity over the past month or two..

    I have always wanted a Dreyse needle gun, but the prices have been silly! This one however I managed to grab off an auction at a reasonable price, although I was aware that it had "Issues".. yeah, woodworm issues...

    Attachment 108079Attachment 108080

    As you can see, the stock was a goner, and split across the wrist! No amount of Acraglas was going to fix this one, and what was there was being held together with the varnish! The metalwork was however savable, pitted on the underside of the barrel, no doubt by the action of woodworm by products, but all the bits were there and the bore was minty. It had however been chrome plated on the action, making me think it had been a parade rifle or used as a "decoration piece"..

    OK.. metalwork off to the local plater who did an excellent job of taking off the chrome without touching the base metal.. but the stock! Where was I going to get a big enough lump of wood for a full length military stock? Luckily I managed to find a lump of American Black Walnut in a local specialist wood shop and rescue it from becoming an electric guitar body.. The guy said "This is going to be expensive..!" OK how much.. £75! ($90) I almost ripped his arm off! OK it is not European Walnut, but that is unobtanium, even in Europe..

    Attachment 108081

    It fitted beautifully and I got a mate to bandsaw out the blank...

    Attachment 108082

    Now the slow bit.. I made up a headless pin for the body screw to align the action with the stock and drilled a hole through the top surface. This became the index for the inletting of the barrel and action into the stock blank...

    It was then down to engineers blue, toothbrush, scorp and chisels for the next few weeks slowly sinking the action and barrel into the stock. I used a small hand router ("granny's tooth") to hog out wood and produce reference depths in key places. I also made myself a barrel groove tool with sharpened washers on a bent handle to give me the barrel profile..

    The rest of the bits were then spotted off from the action screw and inlet on the underside..

    Attachment 108086

    Eventually it was there. My next task was to fit the butt plate, giving a touch of cast off as I had the opportunity! This set the profile for the butt, and gave me the lines to carve down to.

    Attachment 108083

    I mostly used a couple of spokeshaves to remove stock and a circular surform file for cross grain work. Most of the finishing work was done with a half round bastard file.. (sorry about the colour cast on this one... I ran out of blue candles!)

    Attachment 108084

    Finally the end cap and barrel bands were fitted and the forend profile worked down using the bands as guides..

    Attachment 108085

    Lastly the wood was sanded down to size, whiskered, grain sealed, treated with alkanet and finally oil finished...

    Attachment 108087

    I also had to make the tools to clean and strip the bolt and make the ammunition... but that is for another thread...

    Still Sane!

    Just...! All we need now is for the ranges to open!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by bombdoc; 05-15-2020 at 09:36 AM.

  2. The Following 7 Members Say Thank You to bombdoc For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member Daan Kemp's Avatar
    Join Date
    Jan 2016
    Last On
    Today @ 06:54 AM
    Location
    Centurion RSA
    Age
    73
    Posts
    1,392
    Real Name
    Daan Kemp
    Local Date
    03-28-2024
    Local Time
    01:30 PM
    Just awesome!

  5. Thank You to Daan Kemp For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Contributing Member mmppres's Avatar
    Join Date
    Mar 2014
    Last On
    03-22-2024 @ 08:15 AM
    Location
    butler pa
    Age
    58
    Posts
    1,082
    Real Name
    mike
    Local Date
    03-28-2024
    Local Time
    07:30 AM
    wonderful work

  8. Thank You to mmppres For This Useful Post:


  9. #4
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    06:30 AM
    That effort was incredible!

  10. #5
    Legacy Member bombdoc's Avatar
    Join Date
    Aug 2012
    Last On
    03-14-2024 @ 05:12 PM
    Location
    UK
    Posts
    170
    Local Date
    03-28-2024
    Local Time
    11:30 AM
    Thread Starter
    Thanks for the positive feedback chaps...

    The Dreyse M62 is not a bad candidate for this type of restoration for a number of reasons...

    1. The stock is simpler than the original M41 as it is less fussy and does not have a raised comb/cheek piece..
    2. As a single shot, there is no magazine well to bother with.
    3. The stock is parallel either side of the receiver.. this is easier to carve and gives a solid location for holding in the vice.
    4. Strangely enough, the Dreyse is built using Imperial rather than Metric measurements. Even the screws are mostly Whitworth or BA (the needle screw is 2BA! Who Knew?). Presumably the Prussians were not influenced by the Frenchicon at that point in time

    Originally the barrel ( and bayonet) on the M62 were browned.. mine was already in the white when I got it, and is even whiter now since its sojourn in the stripping tank. I have a bottle of LMF Brown sauce on the way from Brownell, so we will see!

    I am about to post an entry on the ammunition thread about making Dreyse ammo if you are interested...

  11. #6
    Legacy Member Salt Flat's Avatar
    Join Date
    Nov 2011
    Last On
    Yesterday @ 03:57 PM
    Location
    USA
    Posts
    760
    Local Date
    03-28-2024
    Local Time
    04:30 AM
    Well, I am impressed with your skill and patience. You were lucky to find such a perfect blank for the project and it came out very nice. Salt Flat

  12. #7
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    04:30 AM
    Very nice job. I had to come have a look after your input over on the thread about removing plating...very nice.
    Regards, Jim

  13. #8
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    01:30 PM
    Admirable perseverance to produce a splendid result!

+ Reply to Thread

Similar Threads

  1. Dreyse 1907
    By Anzac15 in forum Other Military Service Pistols and Revolvers
    Replies: 2
    Last Post: 12-15-2018, 12:16 PM
  2. 1865 Dreyse Jaeger
    By rescuerandy2 in forum Black Powder
    Replies: 0
    Last Post: 04-06-2015, 03:01 PM
  3. Dreyse Reference
    By rescuerandy2 in forum Black Powder
    Replies: 8
    Last Post: 02-26-2015, 11:59 AM
  4. 1910 M07 Dreyse
    By majspud in forum Range Reports - Show us how good you are!
    Replies: 0
    Last Post: 01-16-2015, 07:07 PM
  5. Dreyse needle gun - I need help
    By slovakia in forum Black Powder
    Replies: 6
    Last Post: 06-10-2013, 11:44 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks