+ Reply to Thread
Results 1 to 7 of 7

Thread: 1898 Krag - how do I clean the wood?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Monster Man's Avatar
    Join Date
    Sep 2010
    Last On
    11-09-2023 @ 09:55 PM
    Location
    Noblesville, IN
    Posts
    3
    Real Name
    Ron Hampton
    Local Date
    03-28-2024
    Local Time
    03:12 PM

    1898 Krag - how do I clean the wood?

    I just purchased a Kragicon rifle (1901) and have it disassembled for a thorough cleaning. The wood if very grimy; what can I clean it with to brighten it a bit and get the grime off. I am attacking the bore now, and maybe I'll find the grooves sometime this week as I am now seeking the lands! It was probably last cleaned in the 40'sfrom the way it looks.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    03:12 PM
    Quote Originally Posted by Monster Man View Post
    I just purchased a Kragicon rifle (1901) and have it disassembled for a thorough cleaning. The wood if very grimy; what can I clean it with to brighten it a bit and get the grime off. I am attacking the bore now, and maybe I'll find the grooves sometime this week as I am now seeking the lands! It was probably last cleaned in the 40'sfrom the way it looks.
    If you are just looking to clean the wood and not refinish it, I use regular Hoppes cleaning fluid. It is a very gentle solvent that contains banana oil. It will remove the surface grime and dirt without harming the original finish. I usually apply it in small amounts using a cleaning patch. For a rifle that has not been cleaned in a very long time, I will sometimes go through 40 applications to get down to the original finish. You can try it in a small area first and see how much grime it lifts off on your first application. Sounds like a great project!

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:12 PM
    It really does matter how dirty and exactly how far you wish to go cleaning the wood...as to what you'll need to use.
    Regards, Jim

  6. #4
    Legacy Member mark1's Avatar
    Join Date
    Mar 2009
    Last On
    03-25-2024 @ 09:44 AM
    Location
    Heading for Florida
    Posts
    351
    Local Date
    03-28-2024
    Local Time
    02:12 PM
    I use denatured alcohol and a green scotch bright pad. Work in a small area and than wipe off with a rag. It will clean the grease and grim. Use gloves. It is slow and slow is better. You will need to go over the stock several times.

  7. #5
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-28-2024
    Local Time
    04:12 PM
    I start with Mineral Spirits and an old Cotton 'T' Shirt. Evaluate progress as you proceed. Turpentine works, too. Continue until 'grunge' is gone.

    If you like how the wood is looking switch to several hand-rubbed applications of 50/50 mix of linseed oilicon & Turpentine.

    Buff dry with soft cloth, then, finish with Howard's Feed & Wax or Pledge.

  8. #6
    Contributing Member usabaker's Avatar
    Join Date
    May 2017
    Last On
    Today @ 12:50 PM
    Location
    San Deigo, CA
    Posts
    1,733
    Real Name
    Bill Baker
    Local Date
    03-28-2024
    Local Time
    01:12 PM
    Quote Originally Posted by butlersrangers View Post
    If you like how the wood is looking switch to several hand-rubbed applications of 50/50 mix of linseed oilicon & Turpentine.
    butlersrangers is what I would do, you can use a cotton rag 'wetted' with the 50/50 mix of linseed oilicon & Turpentine to clean as well if you want to skip the Mineral Spirits.
    Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
    " Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "

  9. #7
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    01:12 PM
    You could use a 50/50 mix of mineral spirits and linseed oilicon. Or less than 50% mineral spirits.

    Stock refinishing/restoriing is a slippery slope most of us have been down in the past. It often ends with a bump at the bottom and suddenly you find you went a solvent or abrasive too far!

    Now, having made my share of mistakes and having a better understanding of where to stop, I would limit myself to brushing or blowing out dust and dirt, and wiping down with linseed oilicon.

    The oil will remove superficial dirt, but the reality is that the patina on an old stock is to some extent a mixture of oil and dirt in many layers, and solvents will strip off those layers.

    Where do you stop? Usually when you get down to the surface of the wood.

    By that point the patina is mostly gone and a good deal of value with it.

    Ironically, we seem to be seeing in some similar collecting fields a simultaneous preference for the total rework look and the totally original look on the part of different buyers. A new approach in both cases, at least in some fields.
    Last edited by Surpmil; 07-09-2020 at 04:10 PM.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

+ Reply to Thread

Similar Threads

  1. Replies: 2
    Last Post: 03-07-2017, 12:26 PM
  2. Advice on how to clean a Krag rifle's filthy bore.
    By surplusaddict in forum Other U.S. Service Rifles
    Replies: 7
    Last Post: 07-29-2015, 10:26 AM
  3. How to clean wood furniture?
    By Charlie303 in forum FNFAL Rifles
    Replies: 15
    Last Post: 09-09-2013, 04:43 AM
  4. Gun grease, what do I use to clean? Wood too?
    By paindriven in forum The Restorer's Corner
    Replies: 2
    Last Post: 01-12-2012, 11:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks