Interesting trigger guard, who made it?

[Lancebear]

Hey guys,

Bought some parts recently to repair my '03 that jams on round five. Received two interesting trigger guards. The one on the bottom is an early Remington with lightening groove as noted by J.B. It is marked with an "R" and it has a gray finish. Apparently a rare bird.

The one in the middle came out of my USMC rifle and has a nice olive color, no maker mark, probably RIA or SA.

The TG on top is the one I have questions about. It came packaged in a very tightly woven light green waxed canvas? No paper no markings. It was completely covered with viable soft cosmic. Cleaned it off and noticed some things I haven't seen before.

The color of the finish is a forest green leaning a little to the gray spectrum.
All edges are very sharp and finely machined. The finish feels like #600 grit sandpaper, smooth but with a definite fine tooth. Here's the kicker. All three TG's have different contours but the one in question is drastically different from the other two. Top piece at the rear of the mag box is much thinner. The curve at the top front of the bow is cut much farther back, and the slot for the latch is bigger, also the trigger cutout. Only marking on it is a small clearly struck "8" on the right flat next to the latch slot looking from the top, tried to photograph it but it didn't come out clear in the photo. The machining on the part is truly impressive and in it's condition it would have never been mounted.

Comments and thoughts appreciated here.

Lancebear

P.S. Sorry this turned into a short article rather than a short post, but as Jim T. posted once, this IS a forum of minutiae.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Jim Tarleton]

Looks like a nice SA handguard, post WWI. I am just guessing based on what I see.

Jim

[John Beard]

Jim Tarleton is addled. He has "handguard" on the brain.

I believe the trigger guard was made by Springfield Armory.

J.B.

[Jim Tarleton]

I am dressed up like the mule, drinking Mint Juleps, and smoking Cuban cigars. I think I will take a walk through the Garden of Good and Evil a little later tonight.

OK, OK, it's a triggerguard. Did you notice the milling tool chatter in the lightening cut just behind the front TRIGGERGUARD screw hole?

Where's my cane?

Jim

[Lancebear]

Hey Jim,

You'd love the metal finish in person. Looks like perfect grain in a beautiful slice of rock under a 16X loup. Must be NOS. It would be great to have a rifle with this finish on all of the metal.....real purty. Hate to put it into a rifle I gotta' sell.

Robert

[Lancebear]

Hey J.B.,

Thanks for the reply.

Maybe Jim is loopy from breathing a little too much Burgaw swampgas.

You got any idea when it might have been made? And what about the "8", is that just a regular SA thing? Guess I'll use it.

Cheers and pass the swamp gas,

LB

[Chuckindenver]

i have a customer that needs that early Remington guard you have..if your wanting to part with it.

[Lancebear]

Jim,

Wish I was over at your place tonight. Just got cigs and beer out here in the Peaceshack. Hell I'd dress up like the mule and we could take a walk into the swamp and maybe meet up with a coupla' hot Cuban ladies dressed up just like us. A swamp version of "A Midsummer Night's Dream". Course' we'd need a good '03 for security (Want to stay on topic).

Man, you crack me up. Is the Milling tool chatter something of note, or are you just messin' with J.B.?

Death to bad guys,

Robert

[Jim Tarleton]

Sabre and I were in the swamp earlier today while it was drizzling. Wet swamp means silent movement. I had my dying rabbit call, but I had no luck. We had a South wind too (I travel south into the swamp). I was well armed with my latest toy - "Master Blaster". I am not trying to kill anything, as I am just trying to get an owl to come to me; but we do have bears here.

Did a bit of shooting on the range today too. I really suck with open sights and no glasses. I am trimming & polishing all the 06 cases I can find for the big "loading". I am moving my Dillon from the "little" barn and setting it up in the loft of the Rainbow Barn. I need to crank out 1000 rounds, but I don't have but about 300-400 cases. Nothing beats a Dillon for huge loading runs.

I am going to do some "tricks" and post them. I have done this before, but I can't find the photos. I hope to have a little surprise for JB and Don.

I was serious about the milling chatter.

Jim

[Lancebear]

Man you have fun out in the country. What's the point about the milling chatter?

Robert