-
Legacy Member
No4 commercial scope mounting optipns
Looking for a rock solid "no gunsmithing" mount to put a scope on a No4.Certainly don't want to drill and tap! Don't want any junk....what are my options?
Thank you.
Information
 |
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
09-22-2020 10:49 AM
# ADS
Friends and Sponsors
-
Legacy Member
This.
https://www.fultonsofbisley.com/fire...eld-rifles-sr2
Accumounts do a similar item as well, which will be easy to obtain in the USA
, so hopefully some of the US members here might have experience of that one.
Last edited by GeeRam; 09-22-2020 at 12:22 PM.
-
-
-
Legacy Member
Bros. I like B&K - very solid, uses their rings or any Weaver style rings. I use a long screw to anchor the rear rather than the cross pin they provide. Nothing wrong with Fulton's set up however very pricey to land in Canada. Drop me an email. Ron (Canada)
-
-
Advisory Panel
The Armalon is better than the S&K/Fulton's type in that the scope does not need to be removed to attach or remove the mount to/from the rifle.
This one might be worth a look too.
“There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”
Edward Bernays, 1928
Much changes, much remains the same. 
-
-
Legacy Member
Originally Posted by
Surpmil
The Armalon is better than the S&K/Fulton's type in that the scope does not need to be removed to attach or remove the mount to/from the rifle.
That's interesting, will tell one of our club members that, as he was thinking of buying one of the Fulton's ones for his No.4 at our next club shoot at Bisley.........he might think about ordering an Armalon one instead now
-
PM
