+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17

Thread: Broken or cracked USGI Carbine Bolt

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member W5USMC's Avatar
    Join Date
    Mar 2018
    Last On
    Yesterday @ 07:47 PM
    Location
    Edgar Springs, MO
    Posts
    277
    Real Name
    Wayne
    Local Date
    03-18-2024
    Local Time
    11:10 PM

    Broken or cracked USGI Carbine Bolt

    I am curious to know if anyone has personally experienced a broken or cracked USGI carbine bolt. If so what was the manufacturer of the bolt and where exactly was the breakage.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member floydthecat's Avatar
    Join Date
    Apr 2017
    Last On
    02-25-2024 @ 07:10 AM
    Location
    Southeastern US
    Posts
    163
    Local Date
    03-18-2024
    Local Time
    10:10 PM
    Quote Originally Posted by W5USMC View Post
    I am curious to know if anyone has personally experienced a broken or cracked USGI carbine bolt. If so what was the manufacturer of the bolt and where exactly was the breakage.
    N14 right lug thru the extractor pocket.

  4. Thank You to floydthecat For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    03-16-2024 @ 03:57 PM
    Location
    The wild west of England
    Posts
    3,400
    Real Name
    Mr Clark
    Local Date
    03-19-2024
    Local Time
    05:10 AM
    How common an issue was this, or is this more of a 70 years old problem?

  7. #4
    Legacy Member Bruce McAskill's Avatar
    Join Date
    Mar 2009
    Last On
    01-17-2023 @ 09:10 PM
    Posts
    1,880
    Local Date
    03-18-2024
    Local Time
    11:10 PM
    It was common on the type 1 bolts that an engineering change made the extractor pocket a wee bit stronger in the type 2 bolt. But they can still break and many times from the bolt not closing all the way because of a case being just a tad to long. The pockets the lugs rest in the receiver can become damaged over time. This will hold the bolt back just enough time to cause the bolt to be slammed causing extra pressure to be brought against the right side lug and breaking the lug in the extractor area. The type 3 bolt aka round bolt ( and not the name M2 bolt as it was in use well before the M2 carbines came along.) is still a bit stronger but they too have been know to let go now and then. If one reloads then DON'T push the rounds to the very peak of speed. Standard loads work fine and a 75+ year old carbine will still preform fine. All makers of the typ1,2 and 3 bolts have had breakage. I had a very early Underwood bolt break on me with factory ammo. No reason for it except it was just an early type 2.
    Last edited by Bruce McAskill; 10-29-2020 at 10:52 AM.

  8. The Following 7 Members Say Thank You to Bruce McAskill For This Useful Post:


  9. #5
    Legacy Member DaveHH's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 01:37 PM
    Location
    Northern Calif
    Posts
    1,348
    Real Name
    David Haynes
    Local Date
    03-18-2024
    Local Time
    11:10 PM
    Bruce covered everything that causes the bolt failure. One thing to know, I seem to recall this coming from BQ, if the failure is a result of a problem with the receiver (damaged slots on the left side, beat up receiver lugs etc.) the carbine will continue to break bolts one after another.
    Additionally, the carbine has an Achilles heel, it is cartridge case length. If the case is too long, the bolt will never close all the way. During the manufacture of the 6M carbines, carbines were blowing up at an unacceptable rate. The problem was solved by measuring 100% of ammunition cases. I would check on your ammunition and headspace the weapon.

  10. #6
    Contributing Member W5USMC's Avatar
    Join Date
    Mar 2018
    Last On
    Yesterday @ 07:47 PM
    Location
    Edgar Springs, MO
    Posts
    277
    Real Name
    Wayne
    Local Date
    03-18-2024
    Local Time
    11:10 PM
    Thread Starter
    @DaveHH, I don't have a broken bolt and I am not looking for potential causes, basically attempting to gather a little bit of info from any members that have actually had a bolt break or crack on them. Looking for the manufacturer of the failed bolt. Actually hoping to get enough info from across a few forums to dispel any rumors that one particular manufacturer's bolts break at a higher rate than any of the others.

  11. #7
    Advisory Panel
    USGI's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Oregon, USA
    Age
    78
    Posts
    2,187
    Real Name
    Bob
    Local Date
    03-18-2024
    Local Time
    09:10 PM
    This search might help a bit, or variations of it. - Bob

    https://www.google.com/search?biw=15...h1QMIDQ&uact=5

  12. The Following 2 Members Say Thank You to USGI For This Useful Post:


  13. #8
    Legacy Member Bruce McAskill's Avatar
    Join Date
    Mar 2009
    Last On
    01-17-2023 @ 09:10 PM
    Posts
    1,880
    Local Date
    03-18-2024
    Local Time
    11:10 PM
    There were no makers who didn't have broken bolts. It was considered to be the nature of the beast. But if you want to reduce your chances the use a type 3 bolt. But once again keep a check on the recesses on the receiver for any damage. If found early it can be repaired before damage is done to the bolt. If a bolt has been damaged then the receiver can be repaired. Someone with good machining skills and good welding can do it. If you reload then check each case after sizing and trim. Some carbines need cases to be trimmed each time loaded.
    Last edited by Bruce McAskill; 10-31-2020 at 02:01 PM.

  14. #9
    Advisory Panel
    painter777's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Central Michigan
    Posts
    5,304
    Local Date
    03-19-2024
    Local Time
    12:10 AM
    Quote Originally Posted by W5USMC View Post
    anyone has personally experienced a broken or cracked USGI carbine bolt. If so what was the manufacturer of the bolt and where exactly was the breakage.
    Wayne,
    Your just asking for personal experience..... Correct ?

    2013,
    I have had 1 cracked bolt. The previous shooting session I had ran it hard.
    About a week later, the next time out before shooting I noticed what I thought was a scratch on top in/around the Extractor. In the sun light and by feeling it from left to right I could see / feel the right bolt lug was cracked.
    During inspection at home I could find no issues with either locking shoulder, receiver rails, Op slide lugs or slide tabs. The carbine was well lubed and I had been shooting reloads the last session with all brass being trimmed and loaded with 15.0 of 296. The bolt was a N14 that I believe was original to it. I replaced with another N14 and have continued to shoot this same carbine with same load.

    In 2017 I noticed a rifle club member getting ready to shoot his carbine. We talked a bit and I noticed his bolt was cracked the same way. Told him the possible causes and he packed it up. His bolt was also a N14. Didn't know him and have never heard if he found other issues.

    Pictures below are from my bolt, his looked just like mine:







    I have read and seen pictures of just about every makers' bolts cracked/broken, both round and flat. Breaking the N14 made me leery of all bolts. Breaking one has taught me to note conditions on every carbine I shoot or am considering purchasing.

    I hope this helps your survey,
    Charlie-Painter777

    A Country Has No Greater Responsibility Than To Care For Those Who Served...

  15. The Following 3 Members Say Thank You to painter777 For This Useful Post:


  16. #10
    Contributing Member W5USMC's Avatar
    Join Date
    Mar 2018
    Last On
    Yesterday @ 07:47 PM
    Location
    Edgar Springs, MO
    Posts
    277
    Real Name
    Wayne
    Local Date
    03-18-2024
    Local Time
    11:10 PM
    Thread Starter
    Quote Originally Posted by painter777 View Post
    Your just asking for personal experience..... Correct ?
    Yep Charlie, just looking for the actual members that have had broken bolts, don't need the (I knew a guy whose Uncle said stuff). BTW, I had already noted your experience with broken bolts from looking through the older threads.

  17. Thank You to W5USMC For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Help with Broken Bolt Damaged Receiver M1 Carbine
    By a1parrothead in forum M1/M2 Carbine
    Replies: 49
    Last Post: 01-17-2018, 08:59 PM
  2. Seen Another Cracked N14 Bolt
    By painter777 in forum M1/M2 Carbine
    Replies: 8
    Last Post: 07-04-2017, 06:56 PM
  3. Replies: 23
    Last Post: 06-22-2016, 10:12 PM
  4. Sks broken bolt help
    By HOOKED ON HISTORY in forum Soviet Bloc Rifles
    Replies: 7
    Last Post: 08-04-2015, 07:19 PM
  5. USGI Bolt Tools
    By painter777 in forum M1/M2 Carbine
    Replies: 11
    Last Post: 08-11-2009, 02:23 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks