+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21

Thread: Here We Go Again - No. 5 Advice

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    07:52 AM

    Here We Go Again - No. 5 Advice

    Well, I found another "No 5" on an auction site and I am thinking about bidding on it. There are some things I am concerned about. There is a screw on the left side of the stock just ahead of the receiver that I am not seeing in pictures of other No. 5 carbines. The receiver "scallop" next to the safety doesn't have the same radius look I have seen in other photos also. I don't have access to the rifle so I can't check for the lightening scallops on the barrel next to the receiver. The import mark identifies it as a No. 5. I noticed the end of the lower fore stock has a black end cap and I have seen pictures where they don't have one. Any advice or recommendations are greatly appreciated.

    Attachment 112034Attachment 112035Attachment 112036Attachment 112037Attachment 112038Attachment 112039Attachment 112040Attachment 112041
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 05:50 AM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    12:52 PM
    Quote Originally Posted by Singer B View Post
    The import mark identifies it as a No. 5.
    You will note that the import mark say "MK5" NOT No5 so that is incorrect.
    The action scallops look Kosher.
    Some No5s were fitted with an end cap, some weren't and some that were had them removed when the wood rotted due to collecting moisture under the end-cap
    The screw in front of the magazine looks like an Indian addition (called the Ishapore Screw) so it may have served in India.
    The Bayonet looks like an Indian Copy of the No5 bayonet.
    Another indication of Indian use is the original manufacturers marking seem to have been ground off (the CAI markings are where the original manufacturers markings should be)

    There is not enough detail in the pictures to see any markings, but, the above commebts are based on what I can see.
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    07:52 AM
    Thread Starter
    Quote Originally Posted by Alan de Enfield View Post
    You will note that the import mark say "MK5" NOT No5 so that is incorrect.
    The action scallops look Kosher.
    Some No5s were fitted with an end cap, some weren't and some that were had them removed when the wood rotted due to collecting moisture under the end-cap
    The screw in front of the magazine looks like an Indian addition (called the Ishapore Screw) so it may have served in India.
    The Bayonet looks like an Indian Copy of the No5 bayonet.
    Another indication of Indian use is the original manufacturers marking seem to have been ground off (the CAI markings are where the original manufacturers markings should be)

    There is not enough detail in the pictures to see any markings, but, the above commebts are based on what I can see.
    And that is why you bring it here! Based upon that, it sounds like an Indian copy where they ground off the No 4 stampings?

  6. #4
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 05:50 AM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    12:52 PM
    Quote Originally Posted by Singer B View Post
    And that is why you bring it here! Based upon that, it sounds like an Indian copy where they ground off the No 4 stampings?

    I disagree.
    From the limited pictures it shows the correct weight reducing modifications to the action and I suggest it is a correct No5 Action, but the barrel ............ ? (cannot tell)
    India had quite a lot of No5's which got the 'cleansing' treatment and Indian add-ons.

    Nothing wrong with it, it just has Indian history / service in addition to UKicon History. *

    The shape of the body below the Rear sight is NOT the No4 shape, but it IS the No5 shape.

    * based on the limited photographs.
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  7. Thank You to Alan de Enfield For This Useful Post:


  8. #5
    Legacy Member GeeRam's Avatar
    Join Date
    Apr 2017
    Last On
    03-18-2024 @ 03:21 PM
    Location
    Berkshire, UK
    Posts
    853
    Local Date
    03-28-2024
    Local Time
    12:52 PM
    Yes, I agree, looks like a real No.5 that has been 'stripped' of its original markings while in Indian service, likely during it's first Indian FTR, which isn't uncommon for non-Indian manufactured rifles.
    Just the thing for putting round holes in square heads.

  9. #6
    Legacy Member GeeRam's Avatar
    Join Date
    Apr 2017
    Last On
    03-18-2024 @ 03:21 PM
    Location
    Berkshire, UK
    Posts
    853
    Local Date
    03-28-2024
    Local Time
    12:52 PM
    I've just had a quick look through Gunbroker for No.5's and there are at least 5 or 6 No.5 currently on there in much better condition than this one - as well as 3 or 4 in similar condition, so it would depend on how much this one is going for, and how good the barrel is, and what the headspace is (or at least what number bolt head it has for starters)

    I'd be passing on this one tbh.
    Just the thing for putting round holes in square heads.

  10. #7
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Yesterday @ 01:25 PM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-28-2024
    Local Time
    01:52 PM
    I would concur, Indian service No5 with typical 'Ishy' screw

    A fair number of ex Indian examples were released into the world market a few years ago.

    I wouldn't discount this rifle out of hand, unless you want an unmolested example ( more money and few about).

    I would request a pic with the top wood removed to see if the lightning cuts are present, the Indians frequently replaced worn barrels with easily obtained No4 examples) and ask specifically about barrel condition.

    Matching numbers ect

  11. #8
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    07:52 AM
    Thread Starter
    Thanks guys. Since it is an online auction, I can't get access to the rifle to remove the handguard or check the bore. It is not numbers matching (bolt) but I love the history lesson I just received so even if I dont buy it, I'm ahead of the game. I'll see if I can get it at a decent price with it weaknesses but now I know it is an actual No 5, and one with a pretty interesting and traceable history.

  12. #9
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 05:50 AM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    12:52 PM
    Quote Originally Posted by Singer B View Post
    Thanks guys. Since it is an online auction, I can't get access to the rifle to remove the handguard or check the bore. It is not numbers matching (bolt) but I love the history lesson I just received so even if I dont buy it, I'm ahead of the game. I'll see if I can get it at a decent price with it weaknesses but now I know it is an actual No 5, and one with a pretty interesting and traceable history.
    If the bolt is not 'numbers matching' then it has been 'messed with' in civilian hands an you have no idea if the headspace is correct, as you don't have access to it to assess the headspace, or if the locking lugs are evenly matched It's a 'walkaway' unless at a giveaway price.
    You can buy a 'good' No5 just as easily a buying one with unknown problems.

    Head space can be fixed by changing bolt heads, but it is not just a case of changing the bolt head in this instance as the bolt was never properly fitted to the rifle in the first place.
    Bolts are not 'plug & play' they need actually FITTING (ie work doing to grind the locking lugs so that the forces are evenly balanced on both sides). Not impossible to do it DIY but some skills and knowledge required.
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  13. #10
    Legacy Member GeeRam's Avatar
    Join Date
    Apr 2017
    Last On
    03-18-2024 @ 03:21 PM
    Location
    Berkshire, UK
    Posts
    853
    Local Date
    03-28-2024
    Local Time
    12:52 PM
    Quote Originally Posted by Singer B View Post
    I'll see if I can get it at a decent price with it weaknesses but now I know it is an actual No 5, and one with a pretty interesting and traceable history.
    It depends what you consider a decent price?
    I would also say, its anything but a pretty interesting and traceable history......considering its an Indian rework, and the condition that most of the ex-Indian ones I've come across have been in.
    As already said above, its a 'run away now' example considering, as I said, there is currently a half a dozen much better and un-messed with examples currently for sale on Gunbroker within the USAicon.
    Just the thing for putting round holes in square heads.

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. New gun need advice
    By lyon13 in forum Milsurps General Discussion Forum
    Replies: 4
    Last Post: 07-11-2019, 11:02 PM
  2. Need some advice
    By wslsr in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 10
    Last Post: 12-06-2010, 06:24 AM
  3. Need some advice.
    By Sandrjam in forum M1 Garand/M14/M1A Rifles
    Replies: 4
    Last Post: 11-16-2010, 08:39 AM
  4. No.4 Mk1 (T) - need advice
    By ChasSmith in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 7
    Last Post: 09-24-2010, 03:27 AM
  5. Some Advice Please
    By Bill Hughes in forum M1/M2 Carbine
    Replies: 4
    Last Post: 05-26-2009, 04:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks