+ Reply to Thread
Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 60

Thread: C&R Storage Rack

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member mrandig's Avatar
    Join Date
    Nov 2020
    Last On
    02-13-2021 @ 10:11 AM
    Location
    Houston, Texas
    Posts
    162
    Real Name
    Mark
    Local Date
    03-28-2024
    Local Time
    02:20 PM

    C&R Storage Rack

    My C&R collection keeps growing, and once again, I'm out of room. Since I've got some time over the holidays, it's time to build another wood rifle rack.

    I was lucky to find some nice cherry wood for sale this weekend, so I've got the wood purchased and ready to go. Previous versions have been using curly maple, so we'll see how this new material turns out.

    Attachment 113641 Attachment 113642

    As I go along, I'm just going to drop a few posts here on my progress. I've made a couple of these, and each one turns out great. Nothing fancy, no mad skills required; just some shop tools, glue, a few screws and a couple of coats of shellac to finish.

    As an aspiring wood worker, I try to keep the number screws to a minimum, using other techniques as much as possible. Since glue is involved, this usually this takes a few days, with shellac as a finish, it takes a few more days.

    Stay tuned...
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by mrandig; 12-29-2020 at 11:56 PM.

  2. The Following 5 Members Say Thank You to mrandig For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Contributing Member Sarge1998's Avatar
    Join Date
    May 2010
    Last On
    03-13-2024 @ 08:13 PM
    Location
    Northern Illinois
    Posts
    577
    Real Name
    Joseph Budde
    Local Date
    03-28-2024
    Local Time
    01:20 PM
    Mine is/was very similar. When I finished the basement a few years ago I included a 11'x6' secure storage. We had a new home built and moved in a few weeks ago, I have the building permit ready to drop off and the new secure storage will be 3 times the square footage, we moved from a 2 story to a ranch as we are getting on in age.


    Pointy things on the opposite wall

  5. The Following 5 Members Say Thank You to Sarge1998 For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Legacy Member mrandig's Avatar
    Join Date
    Nov 2020
    Last On
    02-13-2021 @ 10:11 AM
    Location
    Houston, Texas
    Posts
    162
    Real Name
    Mark
    Local Date
    03-28-2024
    Local Time
    02:20 PM
    Thread Starter

    Getting Started

    I was able to get the cherry wood from Rockler for $4.99 bd./ft. which is a great price. Rockler is one of my favorite places to shop, but can be expensive at times. In total, I ended up with about 12 bd./ft. total, so my total investment comes to around $60.00 plus tax.

    Attachment 113665

    The only downside here is that these pieces are "shorts" (scraps/leftovers), which means I will have some constraints to work through as I go. The lengths of these pieces can run between 5' and 7', and the width between 3-1/4" and 8". Wood knots and cracks can also be an issue. The thickness of these pieces however, is a uniform 13/16", so that at least makes my life easier.

    Shorts aren't necessarily a bad thing, and the quality of this wood is way better than anything the big-box stores have for sale. Also, this wood is surfaced S3S, which means that 3 of the four sides have been surfaced/finished. While I own both a jointer and a planer, I won't need them for this exercise.

    For the sake of simplicity, I'm going to build this as 3'x1'x3' rack. With a 4" spacing between rifles, this is wide enough for even the straight-handle bolt action Mausers. At 3' tall, it is also short enough for my little Carcano and few other cavalry rifles. This will hold eight rifles easily.
    Last edited by mrandig; 12-30-2020 at 01:46 PM.

  8. #4
    Legacy Member mrandig's Avatar
    Join Date
    Nov 2020
    Last On
    02-13-2021 @ 10:11 AM
    Location
    Houston, Texas
    Posts
    162
    Real Name
    Mark
    Local Date
    03-28-2024
    Local Time
    02:20 PM
    Thread Starter
    Quote Originally Posted by Sarge1998 View Post
    ine is/was very similar. When I finished the basement a few years ago I included a 11'x6' secure storage. We had a new home built and moved in a few weeks ago, I have the building permit ready to drop off and the new secure storage will be 3 times the square footage, we moved from a 2 story to a ranch as we are getting on in age.
    OOOOH... That is a really nice room. I may have to up my game here in the future. We built a one story also, for the same reason as yours.

    We have two large bedroom walk-in closets, so I may be taking one over to build something similar. I've got multiple gun safes already, but I just keep running out of space. C&Rs can be an addictive hobby, and I've got a few more coming this week.

  9. Thank You to mrandig For This Useful Post:


  10. #5
    Legacy Member mrandig's Avatar
    Join Date
    Nov 2020
    Last On
    02-13-2021 @ 10:11 AM
    Location
    Houston, Texas
    Posts
    162
    Real Name
    Mark
    Local Date
    03-28-2024
    Local Time
    02:20 PM
    Thread Starter

    First Cuts

    I usually draw the layout, dimensions, etc. for pieces like this out directly on the top of my workbench, which is why it's covered in butcher paper. I'm going to try to use sketch up today to make a proper drawing, but that might be beyond my current skill level. We'll see. I'll post it here if it works out.

    That said, here's my cut list. Since the cherry comes in "shorts" of various lengths and widths, rather than being dimensional lumber, I tried to pick and purchase those pieces that were closest to the dimensions below. Since the cut pieces are all 3' long, I can get two pieces from a 6'-7' short.

    13/16" cherry
    4 pcs. - 3' x 5-1/2" (top, sides, side wings)
    2 pcs. - 3' x 3-1/2" (rear braces)
    1 pcs. - 3' x 4" (front kick)

    I did decide last minute to use 3/4" plywood as the bottom. In the past I've glued two pieces of 5-1/2" together to make the floor, but that just seems to be too much trouble. This is cheapo "red oak" from HD stores, but you won't ever be able to see it when this is finished.

    3/4" plywood
    1 pcs. - 3' x 11" (bottom)

    Attachment 113666Attachment 113667Attachment 113668

    Any leftovers will be used to create the lower frame that will keep the rifles in their correct position. Make sure to cut cherry quickly, or it will burn. Any knots can be filled at this time - I was lucky that I don't have too many.

    Attachment 113669Attachment 113670Attachment 113671
    Last edited by mrandig; 12-30-2020 at 01:51 PM.

  11. #6
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    11:20 AM
    Nice gunpile Sarge1998...I'm partial to US issue of course. Love to come over and go through a pot of coffee and discussion...

    My first gunrack was almost exactly like this, used a .303 rack I found in an indoor range. It held about ten or twelve and was allowed until we came into safe storage rules here. My kids had come and grown to the point that I'd handed it off before that though.
    Regards, Jim

  12. The Following 2 Members Say Thank You to browningautorifle For This Useful Post:


  13. #7
    Legacy Member mrandig's Avatar
    Join Date
    Nov 2020
    Last On
    02-13-2021 @ 10:11 AM
    Location
    Houston, Texas
    Posts
    162
    Real Name
    Mark
    Local Date
    03-28-2024
    Local Time
    02:20 PM
    Thread Starter

    Software is not my friend

    So I tried sketch up and promptly lost that battle. I may try again later, but the learning curve is pretty steep, and I'm pretty simple. Hopefully, this at least gets the general point across…

    Original (real) pic:
    Attachment 113674

    My rendition as a sketch up file. It's clearly not to scale, but that's the least of my worries. Also, there's two rear braces that aren't shown, as I was having enough problems already.
    Attachment 113673

    As a final note, I'm actually going to use a dado to hold the bottom shelf in place, so the 36" inches shown will actually be closer to 35-1/4" when finished. I'll detail this step better as I go along.
    Last edited by mrandig; 12-30-2020 at 03:16 PM.

  14. #8
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    02:20 PM
    My storage is varied but I more or less gave up on vertical racks a long time ago. Both gun cabinets have been converted to shelf display cabinets. I still have one remaining vertical rack in what used to be a window opening. My remaining non-safe, non-hidden case storage is on bicycle hooks on the ceiling. My walls are taken up by either pictures, deer antlers, football jerseys or bookshelves. I do have a large 14 gun cabinet area that is currently stuffed full of other collectibles.

    Advantage of the bicycle hooks is they are out of the way, don't take up any wall space, can be easily accessed and I can hang all sort of other things off of them. Each rifle also has at least one, possibly two helmets hanging off them.



    They have also slowly been sneaking into the wife's domain of the living room. There are now three hanging on the walls above openings and two sets of deer antlers mysteriously moved down beside the actual mounted deer in the past couple of weeks.







    I'm following the frog in the pot of cool water on the stove theory. Temperature is rising very slowly. She did notice the deer antlers and objected to the first set but that was going there no matter what, it was the most recent set from this year which I think I posted somewhere here. The second set took her three days to notice but it was the very first buck I shot when I was 12 so she couldn't object to that, I was a mere child. Besides, gives her more places to hang Christmas ornaments.


  15. The Following 5 Members Say Thank You to Aragorn243 For This Useful Post:


  16. #9
    Legacy Member mrandig's Avatar
    Join Date
    Nov 2020
    Last On
    02-13-2021 @ 10:11 AM
    Location
    Houston, Texas
    Posts
    162
    Real Name
    Mark
    Local Date
    03-28-2024
    Local Time
    02:20 PM
    Thread Starter

    Biscuits

    I'm having biscuits for dinner tonight.

    It's just a coincidence, but I'm also using biscuits to assemble the side panels of this C&R rack. Obviously these aren't the same biscuits; these are little wood footballs that work similar to dowels when joining wood together.

    Two 5-1/2" boards will give me the 11" I'm looking for. I call the side pieces "wings", as they only go up about 14-18" from the bottom, mostly to provide an attachment for the bottom and to keep the rack from being top heavy. I'll put a biscuit about every 3"-4" inches and then glue everything together.

    Attachment 113679Attachment 113680Attachment 113681

    It's both a funny and sad true story, but they couldn't figure out what I was asking for when I asked for "biscuits" at the local HD store. It was like going into a bar and asking for a sarsaparilla. Am I that old?

    Anyways, here's a pic of the worlds most expensive biscuit maker, both in its natural habitat and in action. It would be better if this thing was about $150 cheaper, but it's a pretty cool tool. Also makes great sawdust, to mix with glue for touchups or epoxy (I have a collection of different woods).

    Attachment 113682Attachment 113683Attachment 113684Attachment 113685
    Last edited by mrandig; 12-30-2020 at 10:36 PM.

  17. #10
    Legacy Member mrandig's Avatar
    Join Date
    Nov 2020
    Last On
    02-13-2021 @ 10:11 AM
    Location
    Houston, Texas
    Posts
    162
    Real Name
    Mark
    Local Date
    03-28-2024
    Local Time
    02:20 PM
    Thread Starter

    Glue Up

    It's kind of hard to glue and photograph, so I didn't really get a good photo of this step of the process. Once the glue hits, things begin to swell, and time is critical. It's also important to make sure everything is lined up, top and bottom, left and right, side to side, etc. and things can be a bit fussy. I keep a bowl of water and wet towel close to wipe up any excess.

    Lots of glue, lots of clamps. If you're not sure, you're not using enough. Then use lots of more glue, just in case.

    I'm using pipe clamps to keep the pieces pressed together. The thin pieces that run across the wood are cauls, and they keep the height of the pieces even. The better these are fit up, the less work has to be done later.

    We'll see how this all looks after sitting overnight.

    Attachment 113686Attachment 113687Attachment 113688
    Last edited by mrandig; 12-30-2020 at 09:52 PM.

+ Reply to Thread
Page 1 of 6 1 2 3 ... LastLast

Similar Threads

  1. Jeep Gun Rack
    By Flying10uk in forum Milsurps General Discussion Forum
    Replies: 2
    Last Post: 02-25-2016, 12:13 PM
  2. weapons rack
    By RCS in forum M1 Garand/M14/M1A Rifles
    Replies: 2
    Last Post: 04-26-2015, 08:42 PM
  3. New Gun Rack
    By tbonesmith in forum The Watering Hole OT (Off Topic) Forum
    Replies: 14
    Last Post: 07-22-2012, 06:37 PM
  4. My CMP Rack Grade M1C
    By nattcmars in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 05-13-2012, 05:20 PM
  5. storage
    By rice 123 in forum 1911/1911A1 Service Pistol
    Replies: 4
    Last Post: 04-07-2011, 11:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks