+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: No1 stock color stain, closest match for dark furniture.

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member waw44's Avatar
    Join Date
    Dec 2020
    Last On
    03-17-2024 @ 11:00 PM
    Location
    WA
    Posts
    29
    Real Name
    John
    Local Date
    03-29-2024
    Local Time
    03:59 AM

    No1 stock color stain, closest match for dark furniture.

    I am splicing two pieces of Lithgowicon forends to make one complete one and will need stain to color match them . BLOicon by itself won't do it. I swear I came across a post where someone mentiones a specific stain color number from Minwax I think, which they found to be a good match for darker SMLE furniture. I can't find the post now. Help? Any suggestions?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member smerdon42's Avatar
    Join Date
    Sep 2014
    Last On
    Yesterday @ 11:58 PM
    Location
    Natick Massachusetts USA
    Posts
    114
    Real Name
    Mark
    Local Date
    03-29-2024
    Local Time
    07:59 AM
    I would try to get the wood back to a much lighter color first and let it dry out ( I have used a non caustic oven cleaner ) wash off with running water and let dry then I have used dark walnut stain to blend in apply the stain wipe excess off and then repeat until you get the result you like . I liked letting it dry between coats of stain .then use 50/50 BLOicon and metholated spirits.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:49 AM
    Location
    Victoria BC
    Posts
    29,839
    Real Name
    Jim
    Local Date
    03-29-2024
    Local Time
    04:59 AM
    I agree with post #2, cleaning and let it dry first. I don't think Minwax has enough stain or color to do it though. If you have a MUCH lighter piece you could use die to bring it closer. Then a stain and maybe BLOicon...
    Regards, Jim

  6. #4
    Legacy Member waw44's Avatar
    Join Date
    Dec 2020
    Last On
    03-17-2024 @ 11:00 PM
    Location
    WA
    Posts
    29
    Real Name
    John
    Local Date
    03-29-2024
    Local Time
    03:59 AM
    Thread Starter
    Yep, that's the plan. Both pieces are getting cleaned as much as possible before the splice work. I have Fiebings dyes; Dark Brown, Walnut, Chocolate, Show Brown , but with these is fire and forget because once you get them into the wood there is no coming back. With oil based stains mixed with BLOicon and Turpentine there is a good degree of undo available if things don't go well. I will do some trial and error on a scrap piece first of course.

  7. Thank You to waw44 For This Useful Post:


  8. #5
    Legacy Member Bindi2's Avatar
    Join Date
    May 2008
    Last On
    Today @ 05:16 AM
    Location
    Western Australia
    Posts
    1,446
    Local Date
    03-29-2024
    Local Time
    07:59 PM
    You may have two totally different specie pieces of timber. No matter what you do they will kook different. Coachwood it self also ranges from white to a red depending where in the log it came from or where the log came from.

  9. #6
    Legacy Member BurtonP's Avatar
    Join Date
    Oct 2019
    Last On
    03-13-2024 @ 07:08 PM
    Location
    Calgary
    Posts
    214
    Local Date
    03-29-2024
    Local Time
    05:59 AM
    Matching different wood species is always difficult, but if you don't mind it ending up dark reddish-brown it can work. I use Fiebings leather dye, there is a walnut shade, but I tend to use a mix of many types. I thin with linseed oilicon and apply as I would for linseed oilicon - many coats over time. If it isn't a match I can always strip it off with acetone and try again. The darker the wood the easier it is to match this way.

  10. #7
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Yesterday @ 02:10 PM
    Location
    Edgefield, SC USA
    Posts
    4,040
    Local Date
    03-29-2024
    Local Time
    07:59 AM
    You'll have better results using an alcohol based stain like Chestnut Ridge. It works on old dark wood as well as new unfinished. Try Dollar General clear ammonia for cleaning and degreasing which won't hurt anything. I wouldn't touch coachwood or any wood for that matter with any kind of oven cleaner, caustic or otherwise. Use raw linseed oilicon instead of boiled. It penetrates and isn't filled with chemicals to make it dry quicker.

  11. Thank You to Brian Dick For This Useful Post:


  12. #8
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 06:12 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-29-2024
    Local Time
    06:59 AM
    Other than painting it, if the two woods are different, I don't see how you can make it match. Even with oils or stains, where the two pieces join, you will some kind of dark line showing the joint. Even if you use wood filler, I think the joint will be visible. I've seen that on several Mosin stocks.

  13. #9
    Legacy Member HOOKED ON HISTORY's Avatar
    Join Date
    Mar 2011
    Last On
    Yesterday @ 03:47 PM
    Location
    MS/USA
    Posts
    3,991
    Local Date
    03-29-2024
    Local Time
    06:59 AM
    I have had great success with this product.
    https://www.brownells.com/gunsmith-t...-prod7677.aspx

  14. #10
    Legacy Member tatou's Avatar
    Join Date
    Sep 2008
    Last On
    11-12-2023 @ 04:55 PM
    Posts
    281
    Local Date
    03-29-2024
    Local Time
    06:59 AM
    I second (or third) Fiebings Leather dye.
    Dark brown is the only color i use from them... the way i apply it dictates how dark it ends up.
    So far i find it will match just about any type of woods but for best results it is best to try to match the grain and hide any joints under a band.
    If hiding the joint is not possible try at least to have it tightest as possible, so the line is very small.

    The technique i use was taught to me by a forum member.
    You apply many coats of dye until the wood is saturated and you end up with almost a solid color.
    After an appropriate drying time you start applying the oil like you would normally would.
    After 3 to 5 coats of oil you start applying the next coats with fine steel wool.
    Rubbing the oil just enough to remove stain to reveal the wood grain.
    The more you rub, the ''lighter'' the wood becomes.
    Adjust your rubbing (or scrubbing if you prefer) to each portion of the 2 pieces joined together so they appear a close match.
    Once you are satisfied with the color, apply additional coats of oil with just a rag to seal and finish everything.
    If you mess up you can always start over with the dye, etc etc.

    On occasion i add a sploosh of black here and there.... you often see dark stain spots on old stocks and i find that this adds to give it some ''authenticity''... also helps to take your eyes away from those joint lines, if you have some.
    More often then not a good staining job end up taking several used of different colors or type of stains/dyes
    Don't forget to wear cloves... it is messy. (skin is technically leather and it's weird to explain why you have brown hands... don't ask me how i know...)
    Last edited by tatou; 01-22-2021 at 09:10 PM.

  15. The Following 2 Members Say Thank You to tatou For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Stock stain
    By scharfschutzen63 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 18
    Last Post: 06-02-2020, 07:56 PM
  2. Removing oil-based stain from stock
    By coolguy90 in forum Soviet Bloc Rifles
    Replies: 3
    Last Post: 05-11-2012, 01:19 AM
  3. Removing black stain from stock
    By daveboy in forum The Restorer's Corner
    Replies: 9
    Last Post: 02-22-2012, 12:32 PM
  4. Heads Up on a New Stock Stain
    By Orlando in forum M1 Garand/M14/M1A Rifles
    Replies: 0
    Last Post: 02-24-2010, 07:35 PM
  5. Handguards too dark & need lighter color ???
    By Bear57 in forum M1 Garand/M14/M1A Rifles
    Replies: 9
    Last Post: 06-20-2009, 10:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks