+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Sight and wood mismatch?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Rockandroll's Avatar
    Join Date
    Jan 2021
    Last On
    07-09-2022 @ 02:29 PM
    Location
    East Tennessee
    Posts
    67
    Real Name
    Robert Kennard
    Local Date
    03-29-2024
    Local Time
    08:08 AM

    Sight and wood mismatch?

    Here is a pic of a 19998 Kraig I picked up. Very well cared for rifle. When picked up it was missing rear sights. I purchased what was advertised as a 1998 sight. As shown, the wood and sights don’t match. Where did I go wrong? To get it to fit I’m going to have to do some carving. Thanks.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member Low & Slow's Avatar
    Join Date
    May 2015
    Last On
    Yesterday @ 10:52 PM
    Location
    colorado usa
    Posts
    342
    Local Date
    03-29-2024
    Local Time
    06:08 AM
    Several different rear sight went on these rifles over time. Others more knowledgeable will fill you in, but just judging by the chip on the front of the opening in your upper guard, and the length of the opening, I am inclined to think yours might have been fitted with the 1901 type.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member carbineer's Avatar
    Join Date
    Oct 2008
    Last On
    10-09-2023 @ 08:26 PM
    Location
    Western Catskills NYS
    Posts
    35
    Local Date
    03-29-2024
    Local Time
    08:08 AM
    Agreed the hand guard appears to be for the Model 1901 rear sight. The sight you bought appears to be a Model 1896 both correct for a model 1898 Kragicon but shaped differently. Krag screw holes are placed the same so any model rear sight, 1892,1896, 1898(discontinued because it was calibrated for "too hot" new ammo), 1901 and 1902 will fit, but hand guards are design specific.

    http://kragcollectorsassociation.org.../867202750.jpg
    http://kragcollectorsassociation.org...iflesights.jpg

  6. #4
    Legacy Member Rockandroll's Avatar
    Join Date
    Jan 2021
    Last On
    07-09-2022 @ 02:29 PM
    Location
    East Tennessee
    Posts
    67
    Real Name
    Robert Kennard
    Local Date
    03-29-2024
    Local Time
    08:08 AM
    Thread Starter
    Thank you for the answers. The question is...do I search for a new sight or wood?

  7. #5
    Legacy Member carbineer's Avatar
    Join Date
    Oct 2008
    Last On
    10-09-2023 @ 08:26 PM
    Location
    Western Catskills NYS
    Posts
    35
    Local Date
    03-29-2024
    Local Time
    08:08 AM
    A 1901 rear sight is going to be easier to find and less expensive than a hand guard for a Model 1896 rear sight. One other concern if you plan on shooting much is the height of the front sight blade. The Model 1896 rear sight used a shorter front sight blade, Model 01 and 02 where higher. Different zeros.

  8. #6
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:49 AM
    Location
    Victoria BC
    Posts
    29,839
    Real Name
    Jim
    Local Date
    03-29-2024
    Local Time
    05:08 AM
    Replacement Kragicon front sight blades are available too, if you wanted to get one so you don't mess up the one you have. That is if you need taller to start with and have to take it down a bit to zero. Numrich and others have them.
    Regards, Jim

  9. #7
    Legacy Member Rockandroll's Avatar
    Join Date
    Jan 2021
    Last On
    07-09-2022 @ 02:29 PM
    Location
    East Tennessee
    Posts
    67
    Real Name
    Robert Kennard
    Local Date
    03-29-2024
    Local Time
    08:08 AM
    Thread Starter
    Is there anyway to figure out what stock I have, so I can try and find the correct sight for it? Thanks.

    ---------- Post added at 10:52 AM ---------- Previous post was at 10:50 AM ----------

    Additional: I’d be willing to trade the 1996 sight for a correct one.

  10. #8
    Legacy Member carbineer's Avatar
    Join Date
    Oct 2008
    Last On
    10-09-2023 @ 08:26 PM
    Location
    Western Catskills NYS
    Posts
    35
    Local Date
    03-29-2024
    Local Time
    08:08 AM
    The rifle came with that hand guard for a Model 1901 rear sight I would get a Model 1901 rear sight for it. Be advised that the screws are also specific to sights and the "01 takes a "long headed" screw. Sights can be found on ebay, Gunbroker, Gun Auction, generally screws also usually separately. S&S Firearms usually has repro screws and Gun Parts corp. usually has them.

  11. #9
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-29-2024
    Local Time
    08:08 AM
    Don't mess up your model 1901 hand-guard. Original Kragicon hand-guards have become more valuable than the sights. (The 1901 sight is infinitely better for shooting than the model 1896 sight).

    Krag hand-guards are under spring-pressure from the 'clips' riveted to the wood. It is wise to store a loose one, with a Quarter twisted into the rear-clip and a Penny or Nickel twisted into the front clip. This counteracts the spring tension during storage.

    When putting a Krag hand-guard on, or taking it off, remove the rear-sight from the barrel.

    Take the barreled/action out of the stock. Clean any old dried 'gunk' off the barrel with solvent, leaving a slippery film.
    The hand-guard can be easily put on or taken off the barrel at the muzzle.
    It can be gently slid along the barrel taper without trauma.

    Hand-guards 'snapped' on or off a barrel will ultimately crack!

    'Carbineer' has given you excellent information.

    Attached: 1901 rifle sight & screws, 1901 sight windage-lever unlocked, .413" front rifle blade.

    Attachment 115364Attachment 115365Attachment 115366
    Last edited by butlersrangers; 02-22-2021 at 02:07 PM.

  12. #10
    Legacy Member Rockandroll's Avatar
    Join Date
    Jan 2021
    Last On
    07-09-2022 @ 02:29 PM
    Location
    East Tennessee
    Posts
    67
    Real Name
    Robert Kennard
    Local Date
    03-29-2024
    Local Time
    08:08 AM
    Thread Starter

    Sights

    I have searched every web site I can think of and they are all sold out of 1901 rear sights. Does anyone here have an extra? I willing to trade the 1896 sight one for one.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. No. 4 Mk 1 (T) bolt mismatch - how much does it hurt value?
    By Bigwagon in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 33
    Last Post: 01-16-2019, 05:34 PM
  2. Schofield mismatch
    By hsr in forum Other Military Service Pistols and Revolvers
    Replies: 0
    Last Post: 05-10-2013, 12:22 PM
  3. P14 mismatch bolt - question.
    By newcastle in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 8
    Last Post: 12-20-2011, 11:24 AM
  4. New old No4 MK1 TR owner with mismatch question
    By RobsTV in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 11
    Last Post: 09-17-2011, 05:36 PM
  5. Mismatch No4 T scope question
    By Baal in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 09-08-2010, 03:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks