+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Identify this mount

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Rockandroll's Avatar
    Join Date
    Jan 2021
    Last On
    07-09-2022 @ 02:29 PM
    Location
    East Tennessee
    Posts
    67
    Real Name
    Robert Kennard
    Local Date
    04-18-2024
    Local Time
    04:53 AM

    Identify this mount

    Pictured is a 98 I picked many years ago in a trade. This mount is on a very nice rifle. I have never figured out the type or name of the mount. I would like to begin a search for a clone scope and the other piece of the mount. Thanks.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Roy W's Avatar
    Join Date
    Aug 2015
    Last On
    Yesterday @ 03:54 PM
    Location
    Hampshire
    Posts
    561
    Local Date
    04-18-2024
    Local Time
    03:53 AM
    It is called a turret mount.
    They come in low and High versions. I don't have the measurements to hand, yours could be the early LOW version

    Modern copies are available on ebay.

    Just google Mauser Turret mounts

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Rockandroll's Avatar
    Join Date
    Jan 2021
    Last On
    07-09-2022 @ 02:29 PM
    Location
    East Tennessee
    Posts
    67
    Real Name
    Robert Kennard
    Local Date
    04-18-2024
    Local Time
    04:53 AM
    Thread Starter
    Thanks for the reply. I goggled a very good article on the mount. I have a 1943 h block rifle with the low turret mount. The front base has the lock block and the rear mount is machined as a low mount. Now to find the rest. Thanks.

  6. #4
    Legacy Member Roy W's Avatar
    Join Date
    Aug 2015
    Last On
    Yesterday @ 03:54 PM
    Location
    Hampshire
    Posts
    561
    Local Date
    04-18-2024
    Local Time
    03:53 AM
    You're welcome. I would buy that in an instant if it were for sale here.

  7. #5
    Legacy Member Rockandroll's Avatar
    Join Date
    Jan 2021
    Last On
    07-09-2022 @ 02:29 PM
    Location
    East Tennessee
    Posts
    67
    Real Name
    Robert Kennard
    Local Date
    04-18-2024
    Local Time
    04:53 AM
    Thread Starter
    Would you care to guess a price on the rifle. I’ve got $125.00 in it as of now. Found a correct upper mount piece and non correct scope. It’s going to cost me 2-1/2 to 3 times what I have in the firearm.

  8. #6
    Legacy Member Roy W's Avatar
    Join Date
    Aug 2015
    Last On
    Yesterday @ 03:54 PM
    Location
    Hampshire
    Posts
    561
    Local Date
    04-18-2024
    Local Time
    03:53 AM
    $125 is a fraction of the value it would command in the UKicon. If it's an original sniper with the original bases, then who knows. 10 x what you paid would be a reasonable price, probably still too cheap.

    I would suggest that is also a good price for original mounts

  9. #7
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 10:55 PM
    Location
    Desert Hot Springs, California
    Posts
    1,056
    Real Name
    Walt Meyer
    Local Date
    04-18-2024
    Local Time
    03:53 AM
    In the US, that rifle would easily be $1,000+. Any idea what is engraved on the receiver ring under the mount?

  10. #8
    Legacy Member Rockandroll's Avatar
    Join Date
    Jan 2021
    Last On
    07-09-2022 @ 02:29 PM
    Location
    East Tennessee
    Posts
    67
    Real Name
    Robert Kennard
    Local Date
    04-18-2024
    Local Time
    04:53 AM
    Thread Starter
    Have no idea what is under the mount. My older brother purchased this rifle for $25 in the fifties. They were stacked on a table like cordwood at a store. This one caught his eye and purchased it. I traded a M1icon carbine for it which cost me a $125.00. Had it in the safe since then. I purchased a case of surplus ammo for it at $0.04 a round but never shot it. Maybe I will.

  11. #9
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 10:55 PM
    Location
    Desert Hot Springs, California
    Posts
    1,056
    Real Name
    Walt Meyer
    Local Date
    04-18-2024
    Local Time
    03:53 AM
    Quote Originally Posted by Rockandroll View Post
    Have no idea what is under the mount. My older brother purchased this rifle for $25 in the fifties. They were stacked on a table like cordwood at a store. This one caught his eye and purchased it. I traded a M1icon carbine for it which cost me a $125.00. Had it in the safe since then. I purchased a case of surplus ammo for it at $0.04 a round but never shot it. Maybe I will.
    Pretty much all Kar98ks like yours are very collectible in the US. One of the determining factors for value will be the manufacturer's code and year on the receiver ring which is under the mount. Once you determine that, you can start checking serial numbers and seeing if your rifle has matching numbers on all of the parts which raises the value to many collectors. Hope that helps!

  12. #10
    Legacy Member Rockandroll's Avatar
    Join Date
    Jan 2021
    Last On
    07-09-2022 @ 02:29 PM
    Location
    East Tennessee
    Posts
    67
    Real Name
    Robert Kennard
    Local Date
    04-18-2024
    Local Time
    04:53 AM
    Thread Starter
    Most of the metal parts have the serial number or last two digits stamped on them. A number of them also have an eagle over 135. The only date I can find is on the smooth butt plate. It’s 43.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. OT Dr. Payne please identify scope mount on this Ross M1907 Sporter
    By breakeyp in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 11
    Last Post: 11-26-2019, 10:58 AM
  2. Need to Identify/find/buy 1903A4 Redfield Scope Mount Screws
    By Marksmandowntown in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 15
    Last Post: 01-08-2018, 09:05 AM
  3. how to mount a Colt 3 x 20 handle mount?
    By davidxxx in forum M16A2/AR15A2 Rifles
    Replies: 3
    Last Post: 08-05-2016, 11:30 PM
  4. Help identify scope and mount
    By Bob K in forum M1 Garand/M14/M1A Rifles
    Replies: 2
    Last Post: 11-28-2013, 11:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts