Closed Thread
Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 60

Thread: Springfield Krag rifle builder.

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member 99621's Avatar
    Join Date
    Mar 2021
    Last On
    11-07-2023 @ 12:30 PM
    Location
    Wasilla, Alaska
    Posts
    72
    Real Name
    David Walz
    Local Date
    03-18-2024
    Local Time
    09:26 PM

    Springfield Krag rifle builder.



    Hello everyone, I have a collection of military rifles that keeps growing and growing.
    Here in Alaska during the winter snow, I try and keep busy, one of the best ways to keep busy is to build old firearms from scratch using factory original parts.

    From the beginning of my collection, I realized that a old firearm could be jacked up, dangerous to shoot, basically a pile of junk and that's why I build them so they are period correct down to the last nut and screw, the headspace is correct so I can shoot any rifle or handgun in my armory. These rifles were made to go into battle, so I don't have any hesitation in shooting them, I need the finish the same, and the stock, to keep it original. Here in Alaska we can have any firearm in the world as long as it is ATF approved, which means we have a lot of firearms to choose from. I personally have a lot of firearms from around the world, mostly military.

    I have learned that forums are a great resource for knowledge, research, and books. If you don't mind me picking your knowledge, I have some questions.

    I purchased the Joe Poyer book on Kragicon rifles, his books are great, and it really has in depth information on the parts. I've used his books before and I keep notes inside them for a lot of rifles in my armory.

    I want to post some questions with this thread and hopefully get some answers.

    Attachment 115831
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by 99621; 03-15-2021 at 03:53 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member 99621's Avatar
    Join Date
    Mar 2021
    Last On
    11-07-2023 @ 12:30 PM
    Location
    Wasilla, Alaska
    Posts
    72
    Real Name
    David Walz
    Local Date
    03-18-2024
    Local Time
    09:26 PM
    Thread Starter

    Extractor spring

    Mostly everything is explained in my research, except for the extractor spring. The diagram doesn't show the extractor spring and I am trying to locate the place for which it fits.

    Attachment 115832

    As you can see it is not shown in the diagram.

    Attachment 115833

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:51 PM
    Location
    Victoria BC
    Posts
    29,810
    Real Name
    Jim
    Local Date
    03-18-2024
    Local Time
    07:26 PM
    It fits in the front of the extractor...in the corresponding hole and slot. The book shows this spring is not essential but added merely as a precautionary measure... Shown roughly circled.
    Regards, Jim

  6. Thank You to browningautorifle For This Useful Post:


  7. #4
    Legacy Member 99621's Avatar
    Join Date
    Mar 2021
    Last On
    11-07-2023 @ 12:30 PM
    Location
    Wasilla, Alaska
    Posts
    72
    Real Name
    David Walz
    Local Date
    03-18-2024
    Local Time
    09:26 PM
    Thread Starter
    Quote Originally Posted by browningautorifleicon View Post
    It fits in the front of the extractor...in the corresponding hole and slot. The book shows this spring is not essential but added merely as a precautionary measure... Shown roughly circled.
    Cool, and thanks, I appreciate your help.

  8. Thank You to 99621 For This Useful Post:


  9. #5
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    Yesterday @ 08:32 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-18-2024
    Local Time
    10:26 PM
    FWIW - Page #145 of Poyer's book, "The American Kragicon Rifle and Carbine", has a drawing of the left-side of the Krag Extractor, that attempts to show the recess where the Extractor-Spring is located.

    IMHO - There are some 'sub-assemblies' on U.S. Krag models, that were not intended to be taken fully apart, except for repair. These 'sub-assemblies' can be cleaned and lubricated as a unit.
    Examples would be: the safety-lever, the magazine cut-off lever, the Striker-rod & Knob, and the bolt-sleeve/extractor/extractor-spring assembly.
    These sub-assemblies have some small parts, (springs, rivets, and shaped pieces), that are staked or crimped into place. Taking them apart causes needless wear.

    The Krag Extractor is kind of a marvelous flame-blued "wonder spring", with an extractor 'claw' hanging on its end.
    It serves as an extractor, a bolt-guide, a bolt hold-open spring, and a bolt 'release'.
    Through good metallurgy and heat-treat, it is a surprisingly strong part.

    The Krag extractor (which is a tempered spring) is assisted by a subtly positioned second spring (the extractor-spring).
    As the Krag Bolt moves forward and nears the point of rotation, the beveled front edge of the extractor-spring slides under a 'shelf' milled into the left receiver wall and adds further tension to the extractor-claw's engagement with the cartridge rim.

    Attachment 115861Attachment 115862Attachment 115863Attachment 115864Attachment 115865
    Last edited by butlersrangers; 03-16-2021 at 06:13 PM.

  10. The Following 2 Members Say Thank You to butlersrangers For This Useful Post:


  11. #6
    Legacy Member 99621's Avatar
    Join Date
    Mar 2021
    Last On
    11-07-2023 @ 12:30 PM
    Location
    Wasilla, Alaska
    Posts
    72
    Real Name
    David Walz
    Local Date
    03-18-2024
    Local Time
    09:26 PM
    Thread Starter
    Quote Originally Posted by butlersrangers View Post
    FWIW - Page #145 of Poyer's book, "The American Kragicon Rifle and Carbine", has a drawing of the left-side of the Krag Extractor, that attempts to show the recess where the Extractor-Spring is located.

    IMHO - There are some 'sub-assemblies' on U.S. Krag models, that were not intended to be taken fully apart, except for repair. These 'sub-assemblies' can be cleaned and lubricated as a unit.
    Examples would be: the safety-lever, the magazine cut-off lever, the Striker-rod & Knob, and the bolt-sleeve/extractor/extractor-spring assembly.
    These sub-assemblies have some small parts, (springs, rivets, and shaped pieces), that are staked or crimped into place. Taking them apart causes needless wear.

    The Krag Extractor is kind of a marvelous flame-blued "wonder spring", with an extractor 'claw' hanging on its end.
    It serves as an extractor, a bolt-guide, a bolt hold-open spring, and a bolt 'release'.
    Through good metallurgy and heat-treat, it is a surprisingly strong part.

    The Krag extractor (which is a tempered spring) is assisted by a subtly positioned second spring (the extractor-spring).
    As the Krag Bolt moves forward and nears the point of rotation, the beveled front edge of the extractor-spring slides under a 'shelf' milled into the left receiver wall and adds further tension to the extractor-claw's engagement with the cartridge rim.

    Attachment 115861Attachment 115862Attachment 115863Attachment 115864Attachment 115865
    Thanks!

    I can see the place where it fits into, that's awesome thanks. I didn't know that the extractor had it attached on to it, but it is there.


    Attachment 115866

    Thanks again.

  12. #7
    Legacy Member 99621's Avatar
    Join Date
    Mar 2021
    Last On
    11-07-2023 @ 12:30 PM
    Location
    Wasilla, Alaska
    Posts
    72
    Real Name
    David Walz
    Local Date
    03-18-2024
    Local Time
    09:26 PM
    Thread Starter

    Rear sight

    I can't understand why the rear sights go for so much money, $200.00 and up. It's crazy to me that the whole complete sight is like gold.

    I found a complete base and ladder for $50.00, missing the ladder sights, then for $40.00 found the missing parts. I can live with scrounging for parts.

  13. #8
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    Yesterday @ 08:32 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-18-2024
    Local Time
    10:26 PM
    I love scrounging parts and completing and restoring damaged Kragicon sights. (military and commercial)

    Until recently, good Krag rifle sights routinely sold from $45 to $75 on ebay.
    Carbine rear-sight models have long brought a premium, selling for three to ten times the amount of the rifle version.

    Krag parts are getting more difficult to find and prices are getting silly.

  14. #9
    Legacy Member 99621's Avatar
    Join Date
    Mar 2021
    Last On
    11-07-2023 @ 12:30 PM
    Location
    Wasilla, Alaska
    Posts
    72
    Real Name
    David Walz
    Local Date
    03-18-2024
    Local Time
    09:26 PM
    Thread Starter
    Quote Originally Posted by butlersrangers View Post
    I love scrounging parts and completing and restoring damaged Kragicon sights. (military and commercial)

    Until recently, good Krag rifle sights routinely sold from $45 to $75 on ebay.
    Carbine rear-sight models have long brought a premium, selling for three to ten times the amount of the rifle version.

    Krag parts are getting more difficult to find and prices are getting silly.
    I have been fortunate enough to find most of the receiver parts, stock parts, checking all over the web for a good price, quality parts, it's really good when you can visually inspect each part for any issues before putting it together. I still have to locate a stock, however I'm not ready to start that part of my search.
    Again, I am on the hunt for: good condition parts, excellent screws, nothing to be refinished, same for the wooden stock, forearm.

  15. #10
    Legacy Member 99621's Avatar
    Join Date
    Mar 2021
    Last On
    11-07-2023 @ 12:30 PM
    Location
    Wasilla, Alaska
    Posts
    72
    Real Name
    David Walz
    Local Date
    03-18-2024
    Local Time
    09:26 PM
    Thread Starter
    I have all of the parts, only exception is the wood.

    Right now I am contemplating on re-indexing the barrel, reamer the 30-40 chamber to close the no-go gap.

    Do you think that it would affect the rear sight position to the wooden stock?

Closed Thread
Page 1 of 6 1 2 3 ... LastLast

Similar Threads

  1. Springfield 30-40 KRAG Carbine Rifle Rough Riders
    By usabaker in forum Krag Rifles
    Replies: 5
    Last Post: 05-28-2018, 10:04 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks