+ Reply to Thread
Results 1 to 4 of 4

Thread: Enfield No.4 Hairline Cracks

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member greggordon52's Avatar
    Join Date
    Oct 2020
    Last On
    06-04-2022 @ 01:54 PM
    Location
    Houston, Texas
    Age
    71
    Posts
    15
    Real Name
    Greg
    Local Date
    03-28-2024
    Local Time
    06:19 AM

    Enfield No.4 Hairline Cracks

    This No.4 Mk.1 came to me by way of Century Arms in the mid 1990s. It was pretty, despite mismatched wood, and had (still has) a nice bore but it never shot that well. So it languished, unused until Covid sparked a new interest in me. So much for the backstory.

    I now have disassembled it and find hairline cracks in the forend butt where it meets the stock and at the front trigger screw. Here is where my questions begin:
    -Are these cracks in the forend’s butt a problem? I.E., do I need to fix them?
    I have read elsewhere that there is very little force spreading the wood in that
    Spot so they can be ignored. If they do need repair, how? Wick in CA glue or
    pass through a brass pin or dowel with epoxy?
    -I assume the crack at the trigger screw (king screw) will have to be repaired.
    Wick CA glue and clamp? Brass pin or dowel and epoxy?
    -I suspect that cracks labeled 1 & 2 are actually just one crack that runs beneath
    the tie strap and that I will have to remove the tie strap. To me the tie strap
    looks like one of those things that is easy to remove but fiendishly difficult to
    replace. Any thoughts?
    Attachment 116462Attachment 116463Attachment 116464Attachment 116465Attachment 116466
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    04:19 AM
    Well I suppose I'll go first then: 'wouldn't worry about the crack that probably runs more or less vertically through the back of the forend as the strap will prevent that going any further horizontally and vertical spreading would be pretty unlikely once the forend is sandwiched between the guard and the bottom of the receiver.

    The crack on the lower right is a different matter, and that one should/could be drilled and dowelled from inside the slot the guard sits in.

    Am not aware of any glue that works on oily wood, albeit a vegetable oil, but there may be something others know of. So, do you want to get into the finish removal that cleaning the oil out/off would require? If not, drill the holes, use a strong dowel (I'd use bamboo myself, from chopsticks), some epoxy and call it good.

    There's one take on it and you will no doubt receive others!
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  4. The Following 2 Members Say Thank You to Surpmil For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    03-25-2024 @ 11:01 AM
    Location
    South West Western Australia
    Posts
    7,734
    Real Name
    CINDERS
    Local Date
    03-28-2024
    Local Time
    07:19 PM
    A very experienced person who will eventually return to the fold has stated with gluing these stocks is to clean all traces of the oil from the stock and to use aircraft grade epoxy as the glue, what wood you use is up to you but an oak dowel or as Surpmil suggested. Search cleaning stocks you'll find all the info for that part and also fixing splits in stocks should be scads of information in there.
    Other stock repairers are undoubtably going to come along and offer their experiences with fixing these maladies you have with your stock.

  7. Thank You to CINDERS For This Useful Post:


  8. #4
    Legacy Member Frank46's Avatar
    Join Date
    Jan 2009
    Last On
    02-13-2024 @ 12:40 PM
    Location
    New Iberia, Louisiana
    Posts
    63
    Local Date
    03-28-2024
    Local Time
    07:19 AM
    I've used acetone to degrease the wood on a Ishapore #4 mk1 as the draws were mush. Had some 1/2" oak I had bought for a project and cut the damaged wood from both sides of the trigger slot from top to where the trigger guard goes. Degreased again and used JB clear weld epoxy plus some 1/8 dowels I managed to find at our local wally world. Drilled 1/8" holes on either side of the stock from the outside till the drill broke the surface of the oak piece. And roughened them up and they got the JB weld treatment. Let sit for a couple days to make sure the epoxy sets up. Trimmed both dowels and used Min Wax cherry and ebony oil based stain mixed in a pill bottle. Now all I have to do is replace the wood where the draws are. They will get pieces of oak glued in place and possibly the 1/8" dowel treatment. Right now my garage gets over 110 degrees due to the heat wave here in Louisiana. After 5 minutes in there even with both doors opened I'm soaking wet. This has been a funny season. First we got the cold snap. 20 degrees then 13 degrees. Then one day its spring. Set records for both temp and amounts of rain. Still no local ranges open due to covid and now with the delta variant they look to be closed for a good long time. Stay safe everyone. Frank

+ Reply to Thread

Similar Threads

  1. Stock Cracks
    By rescuerandy2 in forum Black Powder
    Replies: 6
    Last Post: 07-01-2019, 09:58 AM
  2. No.1 Mk3 Bolt Cracks
    By seabot2 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 40
    Last Post: 05-07-2018, 05:13 AM
  3. Stock Hairline Crack---Repair
    By JOHN42768 in forum M1/M2 Carbine
    Replies: 7
    Last Post: 04-09-2011, 07:28 AM
  4. MLM handguard dry out cracks
    By Noel in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 06-11-2010, 10:08 AM
  5. Repairing cracks in stocks
    By glp70 in forum The Restorer's Corner
    Replies: 4
    Last Post: 05-21-2009, 10:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks