+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Action torque specs

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Frameman's Avatar
    Join Date
    Jan 2020
    Last On
    08-26-2021 @ 08:52 PM
    Location
    SW Ohio
    Posts
    11
    Local Date
    03-28-2024
    Local Time
    09:20 PM

    Action torque specs

    Does anyone know the torque specs for the type 99 action?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member mark1's Avatar
    Join Date
    Mar 2009
    Last On
    03-25-2024 @ 09:44 AM
    Location
    Heading for Florida
    Posts
    351
    Local Date
    03-28-2024
    Local Time
    08:20 PM
    Type 99's have an index mark and you need to align the barrel index mark with the receiver index mark. Once aligned you will need to head space the bolt.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Frameman's Avatar
    Join Date
    Jan 2020
    Last On
    08-26-2021 @ 08:52 PM
    Location
    SW Ohio
    Posts
    11
    Local Date
    03-28-2024
    Local Time
    09:20 PM
    Thread Starter
    Quote Originally Posted by mark1 View Post
    Type 99's have an index mark and you need to align the barrel index mark with the receiver index mark. Once aligned you will need to head space the bolt.
    I appreciate your response but I’m asking about the torque spec for the action screws through the trigger guard not the barrel to receiver.
    Sorry if I wasn’t clear.

  6. #4
    Legacy Member bob q's Avatar
    Join Date
    Sep 2014
    Last On
    03-20-2024 @ 10:15 PM
    Location
    north texas
    Posts
    444
    Local Date
    03-28-2024
    Local Time
    09:20 PM
    As tight as you can get them with a good fitting screw driver by hand . Get both screws in and just touching . bang the gun down on the buttplate muzzle up a few times . Tighten the forward screw first . Mark 1 - Please tell me how you change the headspace on the rifle after the barrel is installed to the index mark ?

  7. #5
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Today @ 08:26 AM
    Location
    Sault Ste. Marie, ON
    Posts
    1,257
    Real Name
    A.N.
    Local Date
    03-28-2024
    Local Time
    10:20 PM
    Quote Originally Posted by Frameman View Post
    I appreciate your response but I’m asking about the torque spec for the action screws through the trigger guard not the barrel to receiver.
    Sorry if I wasn’t clear.
    There likely is still evidence of the staking on the action screws and you should be able to line those up to get what it originally would have went into service with.

  8. #6
    Legacy Member steveu's Avatar
    Join Date
    Feb 2019
    Last On
    03-24-2024 @ 05:18 PM
    Location
    Texas, USA
    Posts
    81
    Local Date
    03-28-2024
    Local Time
    08:20 PM
    I usually start at 25ip and work up to a max of 35ip for non-pillar bedded rifles. After I find the sweet spot, a drop of blue thread locker to hold them in place.

  9. #7
    Legacy Member bob q's Avatar
    Join Date
    Sep 2014
    Last On
    03-20-2024 @ 10:15 PM
    Location
    north texas
    Posts
    444
    Local Date
    03-28-2024
    Local Time
    09:20 PM
    With about 80 years of stock shrinkage the old marks will not matter any more . If you do not get them tight you can crack a stock with recoil . Just look at all the tang cracked Mausers out there due to people trying to use the locking screws , incorrectly .

  10. Thank You to bob q For This Useful Post:


  11. #8
    Legacy Member Frameman's Avatar
    Join Date
    Jan 2020
    Last On
    08-26-2021 @ 08:52 PM
    Location
    SW Ohio
    Posts
    11
    Local Date
    03-28-2024
    Local Time
    09:20 PM
    Thread Starter
    Thanks to you all for the advice given. I’ll use the advice and apply it to my rifles.

  12. #9
    Legacy Member mark1's Avatar
    Join Date
    Mar 2009
    Last On
    03-25-2024 @ 09:44 AM
    Location
    Heading for Florida
    Posts
    351
    Local Date
    03-28-2024
    Local Time
    08:20 PM
    You need to CHECK the head space every time you change the barrel or bolt.
    If the barrel does not head space you may need to chamber ream barrel to achieve the correct head spacing. Or try different bolts.
    Last edited by mark1; 05-03-2021 at 04:51 PM.

  13. #10
    Legacy Member bob q's Avatar
    Join Date
    Sep 2014
    Last On
    03-20-2024 @ 10:15 PM
    Location
    north texas
    Posts
    444
    Local Date
    03-28-2024
    Local Time
    09:20 PM
    I asked how you headspace the bolt AFTER the barrel is installed , like you said .

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Torque for front trigger screw
    By CINDERS in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 13
    Last Post: 11-25-2016, 10:03 PM
  2. Action Screw Torque
    By mausernut in forum Swiss Rifles
    Replies: 2
    Last Post: 02-19-2016, 09:33 PM
  3. Stock fitting/torque
    By BritishBeer in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 12
    Last Post: 08-01-2013, 08:53 PM
  4. Torque for M1D scope mount (small screws)
    By CubeWarrior in forum M1 Garand/M14/M1A Rifles
    Replies: 0
    Last Post: 02-07-2011, 09:04 AM
  5. Talk to me about torque! Armourer-type question (Mr. L?)
    By gravityfan in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 09-28-2009, 04:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks