+ Reply to Thread
Results 1 to 9 of 9

Thread: Best V-42 Force Knife/Stiletto (1st SSF) Replica?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member tj214's Avatar
    Join Date
    May 2019
    Last On
    03-26-2024 @ 05:38 PM
    Location
    US
    Posts
    82
    Local Date
    03-28-2024
    Local Time
    01:33 PM

    Best V-42 Force Knife/Stiletto (1st SSF) Replica?

    What's the best overall quality V-42 replica or more modern "official" manufacture? Lots of copies have and are being produced, but at least visually most are pretty abysmal.

    Supposedly original V-42s issued to the 1st Special Service Force occasionally come up for sale, but are FAR outside my budget. A handful were issued to the US Navy, but are extremely rare and appear to have been exactly the same as the 1 SSF version except for, possibly, ownership markings or stampings.

    Case (the original manufacturer) manufactured a version from 1989-1993, and I assume it matched their original in every respect; also very hard to find. Rumors other official or semi-official manufacturers produced it in the last few decades, but clearly the Chinese are in the mix as well with their $30 copies.

    Ton of comments, "feedback," and opinions around the web, but don't seem to come from subject matter experts. SMEs certainly exist, but I've yet to find them after a LOT of searching.

    Thoughts on which are the best quality and most accurate non-original knives?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    01:33 PM
    Interesting knife. I did some checking around and it seems like all that are available now are from China which would make me question all of them. One thing I did notice was some have the leather guard above the crosspiece and some don't. That would be one thing to check for.

    The choices I saw were around $100 for a Chinese knife or $29 for the same that also looked the same so I have no idea. One of the cheap ones looked cheap, one looked pretty good but that one was $33 I think. Another problem is the sheath. Some had what looks to be similar to the original and others a crappy black one that just looks like crap.

    If you find one, let us know. Might be something I'd be interested in. I didn't see any that had that oval groove in the blade.

    Actually I just did find one with the thumb groove, but it has the crappy scabbard: BudK BK2140 V-42 STILETTO Dagger fixed blade knife 12 1/4 overall China NEW! 760729214057 | eBay
    Last edited by Aragorn243; 07-08-2021 at 03:38 PM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    10:33 AM
    This one has a decent repro scabbard and has some reviews... WWII V-42 Elite Special Forces Knife | Atlanta Cutlery
    Regards, Jim

  6. #4
    Legacy Member tj214's Avatar
    Join Date
    May 2019
    Last On
    03-26-2024 @ 05:38 PM
    Location
    US
    Posts
    82
    Local Date
    03-28-2024
    Local Time
    01:33 PM
    Thread Starter
    Thanks, guys. It does look like the Atlanta Cutlery version may be the best available replica.

    Unfortunately for me (the same Dummkopf who fabricated the very expensive ratchet assembly for my SOE/CISA Sten project (https://www.milsurps.com/showthread.php?t=70707)), a couple of NOS V-42s produced by Case in the 1970s or 1990s came available on eBay at less than Case was charging for them on their own website, so I picked one up. Still paid an arm and a leg, but at lot less than the $8k going rate for originals.

    The postwar Case-produced versions appear to be exact copies of the WW II originals, but made from somewhat higher quality steel, which is not a huge surprise given the wartime shortages and the fact knives were considered consumables (or at least not expected to last forever).

    There are rumors Case will make another run of these knives this fall, although I didn't see such an announcement on the Case website (https://caseknives.com/products/v-42-military-knife). They will be a LOT more expensive than the Chinese knockoffs, but usually you get what you pay for.

  7. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    10:33 AM
    Quote Originally Posted by tj214 View Post
    There are rumors Case will make another run of these knives this fall
    I didn't bother sending you that link, it includes many reviews that will bear on your decision... https://www.knifecenter.com/item/CA2...leather-sheath
    Regards, Jim

  8. #6
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    01:33 PM
    I ordered one of the Atlanta Cutlery ones this morning. Not sure if I should thank you or curse you for starting this thread. I'm usually not much into replicas but this just looks too good to not have one and I'm not paying $500 for a repro.

  9. Thank You to Aragorn243 For This Useful Post:


  10. #7
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    10:33 AM
    Quote Originally Posted by Aragorn243 View Post
    I ordered one of the Atlanta Cutlery ones
    So we'll be able to have a look soon then...
    Regards, Jim

  11. #8
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    01:33 PM
    Quote Originally Posted by browningautorifleicon View Post
    So we'll be able to have a look soon then...
    I don't think so, four week backorder.

  12. Thank You to Aragorn243 For This Useful Post:


  13. #9
    Legacy Member tj214's Avatar
    Join Date
    May 2019
    Last On
    03-26-2024 @ 05:38 PM
    Location
    US
    Posts
    82
    Local Date
    03-28-2024
    Local Time
    01:33 PM
    Thread Starter
    Received my 1995 Case manufacture V-42 today. Agreed I'm not much into repros, although not sure what new production by the original manufacturer is termed.

    Paid quite a bit but a LOT less than the going rate for WW II originals (Case also manufactured the originals). As noted, Case has periodically made new runs of the knife (late '80s, 1990, 1995, and 1998 as far as I know), and may be planning yet another run.

    Lucked off and got one in literally new/pristine condition; the sheath was still in the unopened sealed original bag and the knife has no scrape or scuff marks. This one came with Case's wooden display box.

    The instructions state the knife is factory sharpened to a razor edge. It's sharp, but not paper slicing sharp. I'm not gonna add a better edge because this is a display piece.

    The Case display box included in this set is beautifully made, although the laser etching on the glass is not A+ quality. If I knew before this purchase what I now know, I'd skip the display box--although this merely personal taste. Love the Case knife though.

    The problem is the visual "balance" of the display, which is thrown off by the necessary inclusion of the long leather scabbard. The knife center is positioned well above the box centerline, which to my eye unbalances the display. Good news is that the knife is securely held in place by strong magnets and the sheath snap, so it won't fall off the mounting plinth. The box mounting hardware is so strong the box WILL NOT fall off the wall, nor easily knocked off.

    One note about displaying the knife in this box: the knife will lay against the sheath at exactly point where its metal staples protrude. This will mar the knife's surface, so I cut a small rectangle of black felt to put between the blade and staples. Problem solved.

    In sum, pleased with the experience.

  14. The Following 2 Members Say Thank You to tj214 For This Useful Post:


+ Reply to Thread

Similar Threads

  1. Questions about a Marine Raider Stiletto
    By Pike-56 in forum Edged Weapons Forum
    Replies: 3
    Last Post: 04-19-2020, 07:42 AM
  2. Replies: 8
    Last Post: 05-09-2016, 11:42 PM
  3. Unknown stiletto scabbard
    By Bizio in forum Edged Weapons Forum
    Replies: 5
    Last Post: 11-16-2012, 04:10 PM
  4. O.S.S. Pancake Flipper Stiletto WWII
    By carlgustafs in forum Edged Weapons Forum
    Replies: 4
    Last Post: 08-27-2008, 02:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks