Closed Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Scoping a M-10 Ross

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member mr humble's Avatar
    Join Date
    Aug 2009
    Last On
    09-15-2022 @ 09:04 PM
    Posts
    55
    Local Date
    03-28-2024
    Local Time
    07:30 AM

    Scoping a M-10 Ross

    Got my M-10 back from Oregongunsmithing.

    It now has a brand new .308 bore from the rusted nasty .287 that it was.

    Mine is the 28" bbled model w/o the flip up sight on the rear receiver ring.

    Thought long and hard about the best way to scope it. The front ring is round, the rear flat.
    Digging in my box of Weaver bases I came up with a #45 and #48. The 45 countour was almost perfect so I put a piece of fine emery, abarasive up on the front ring and countoured the base to the ring. The 45 was filed flat on the bottom to fit the rear ring.

    To get it right a long tube scope was mounted in 2 rings, the rings clamped to the bases, the bases set in place. The scope reticle was set at the center of it's range. With the rifle in a cleaning rest, 2 drops of gorilla glue was put on each base and a bore sighter installed. The rig was moved until it was close to centered left to right.

    Let the glue dry and recheck the bore sighter.

    If all is good, now you can drill and tap the rings and complete installation.

    I used a Weaver J2.5 with a 6X Litscherts converter as it mounts low and has a long tube.

    You can see the "308/280 Ross "being extracted.



    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. Thank You to mr humble For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member mr humble's Avatar
    Join Date
    Aug 2009
    Last On
    09-15-2022 @ 09:04 PM
    Posts
    55
    Local Date
    03-28-2024
    Local Time
    07:30 AM
    Thread Starter
    Why is my post responded to with an advertisement ?

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    04:30 AM
    Quote Originally Posted by mr humble View Post
    Why is my post responded to with an advertisement ?
    I don't see any advertisement, has it been removed or is it spam to you?
    Regards, Jim

  7. #4
    Legacy Member mr humble's Avatar
    Join Date
    Aug 2009
    Last On
    09-15-2022 @ 09:04 PM
    Posts
    55
    Local Date
    03-28-2024
    Local Time
    07:30 AM
    Thread Starter
    BANNER AD SPACE AVAILABLE CLICK TO INQUIRE

    2X3" FULL COLOR AD

  8. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    04:30 AM
    Nope, must be directed to your computer. It's not here.

    The rifle...that should be a shooter now. A nice clean new barrel inside? I wish we had facility to do rebore here.
    Regards, Jim

  9. #6
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    04:30 AM
    IMHO it would be a pity to D&T an original rifle now, but yours so your choice. Some have made up a cantilever mount to go into the express sight dovetail, as well as the dovetail on the bridge you used. Will be interested to hear how it shoots and what your load is.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  10. #7
    Legacy Member mr humble's Avatar
    Join Date
    Aug 2009
    Last On
    09-15-2022 @ 09:04 PM
    Posts
    55
    Local Date
    03-28-2024
    Local Time
    07:30 AM
    Thread Starter
    I don't have wall hangers. They get shot or they go away. Unaware of legions of Ross collectors out there fighting over them, especially a rebored one.

    Too old and too blind to shoot irons anymore.

  11. Thank You to mr humble For This Useful Post:


  12. #8
    Moderator
    (M1 Garand/M14/M1A Rifles)
    Bob Womack's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 06:15 AM
    Location
    Somewhere Between Clever and Stupid
    Posts
    3,396
    Real Name
    Bob Womack
    Local Date
    03-28-2024
    Local Time
    07:30 AM
    Double check - I disabled my Ad Blocker and no ad appeared.

    Bob
    "It is said, 'Go not to the elves for counsel for they will say both no and yes.' "

    Frodo Baggins to Gildor Inglorion, The Fellowship of the Ring

  13. #9
    Legacy Member mr humble's Avatar
    Join Date
    Aug 2009
    Last On
    09-15-2022 @ 09:04 PM
    Posts
    55
    Local Date
    03-28-2024
    Local Time
    07:30 AM
    Thread Starter
    Just so there is NO question, this is what is on my screen !


  14. #10
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    04:30 AM
    Quote Originally Posted by mr humble View Post
    this is what is on my screen !
    There's a triangle at the bottom of the screen (should be) beside the thanks button and info sniper and bookmark, you click on it and can give that page to the mods so they can block the perpetrator...
    Regards, Jim

Closed Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Scoping a SMLE Mk III*
    By Dieudonne' Saive. in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 15
    Last Post: 12-10-2019, 01:17 PM
  2. Help with scoping a No1 MkIII
    By tsquared82 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 26
    Last Post: 03-25-2016, 04:40 PM
  3. Scoping a No.4
    By Wainwrightbagger in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 22
    Last Post: 09-01-2015, 04:34 PM
  4. Scoping the 1969 Romanian Trainer
    By Blackwater in forum .22 Smallbore
    Replies: 1
    Last Post: 05-17-2010, 12:45 AM
  5. Scoping an AR
    By Brad in Idaho in forum M16A2/AR15A2 Rifles
    Replies: 2
    Last Post: 03-16-2009, 05:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks