+ Reply to Thread
Results 1 to 6 of 6

Thread: WTK: Any Idea if this is a US Military M1/M2 Stock

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member md66948's Avatar
    Join Date
    Jul 2011
    Last On
    11-07-2022 @ 06:34 AM
    Location
    PA
    Posts
    72
    Real Name
    Dane R.
    Local Date
    03-28-2024
    Local Time
    03:20 PM

    WTK: Any Idea if this is a US Military M1/M2 Stock

    I picked up a few Military Stocks and Parts Kits at an auction this week.

    Can anyone ID the marlings on this stock? There are no markings in the sling cut out area on the right side of the butt stock. In the middle of the right side of the stock there are two 0s or they could be Os. To the left of them there are two faint marks and one looks like it could of been cross cannons. I am not sure.

    Also there is a strange bolt in the stock behind the trigger group. I beleive there was an M2 mounted in this stock. There is a lot of wear on the inside of the stock where the selector would of been on and M2.

    Yes, I do see the crack.


    Your Input will Greatly Be Appreciated.





    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member jimb16's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 09:19 PM
    Location
    N.E. Ohio
    Posts
    1,151
    Real Name
    James Barchok
    Local Date
    03-28-2024
    Local Time
    04:20 PM
    That strange bolt is not a bolt. It is the recoil plate screw escutcheon. When the screw it tightened the escutcheon is drawn up into the stock. Look on the top surface of the stock, left side beside the barrel channel near the front. You may find an SA stamped there. I'd guess it is a military stock. It certainly looks like one. Those appear to be rack numbers on the stock. It would be somewhat unusual to find a crossed cannon stamp on one of those stocks.
    When they tell you to behave, they always forget to specify whether to behave well or badly!

  4. Thank You to jimb16 For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel
    USGI's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Oregon, USA
    Age
    78
    Posts
    2,187
    Real Name
    Bob
    Local Date
    03-28-2024
    Local Time
    01:20 PM
    Looks a bit too "knarly" for a USGI stock - could be foreign made. - Bob

  7. #4
    Legacy Member RCS's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 10:51 AM
    Location
    USA
    Posts
    4,314
    Real Name
    Robert Seccombe
    Local Date
    03-28-2024
    Local Time
    03:20 PM
    I don't know if this is related to the above postings, but many years ago I was picking up some M1icon rifle
    stocks from a dealer at his warehouse. This dealer bid on government surplus and bought alot of stuff
    from Rock Island and Crane in Ind. He had carbine stocks all over and i noticed some of them, they
    very light weight wood of a type, I was not familiar with - and the stocks in the butt area were two piece
    like the Japanese Arisakaicon stocks. He told there were from Japan !

  8. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:20 PM
    Quote Originally Posted by RCS View Post
    and the stocks in the butt area were two piece
    like the Japanese Arisakaicon stocks. He told there were from Japan !
    Those would be neat to see. The Japanese defense force was using them for a time weren't they also? Just like Germanyicon?
    Regards, Jim

  9. #6
    Advisory Panel
    painter777's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Central Michigan
    Posts
    5,312
    Local Date
    03-28-2024
    Local Time
    04:20 PM
    That crack could be repaired with more and better placement of threaded brass pins.
    I can't see enough of the full stock to decide anything else. Might be a M2 Potbelly.

    I have some Asian Kapur Stocks their grain looks more like Birch.
    This one might be a early commercial, we just can't see enough to judge it.

    ALL: Catch the Meteor showers at the end of the week. An overlap of 3 different showers...... FWIW.
    Charlie-Painter777

    A Country Has No Greater Responsibility Than To Care For Those Who Served...

+ Reply to Thread

Similar Threads

  1. 1913 DWM Military Luger w/stock lug and BHO
    By steveTA1983 in forum Other Military Service Pistols and Revolvers
    Replies: 11
    Last Post: 10-20-2019, 10:07 PM
  2. Replies: 4
    Last Post: 08-05-2015, 07:44 PM
  3. Good idea? bad idea?
    By big bear in forum M1 Garand/M14/M1A Rifles
    Replies: 4
    Last Post: 12-06-2014, 06:36 PM
  4. Any idea as to what this is?
    By Fremen in forum Milsurps General Discussion Forum
    Replies: 6
    Last Post: 12-06-2010, 05:18 PM
  5. WTK: orig military plastic carbine stock???
    By m1-carbine in forum M1/M2 Carbine
    Replies: 4
    Last Post: 06-19-2010, 02:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks