+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Wonder What Happened?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    02:41 PM

    Wonder What Happened?

    A friend of mine brought me a Type 38 that he found in an old house he was rehabbing. He asked me if I could examine it and if possible, return it to shooting condition. It was in pretty bad shape. Initial examination revealed that the bolt was missing the safety knob, firing pin and firing pin spring. There was a lot of rust and weird stuff oozing out of different. A light down the barrel revealed a complete blockage of some type. I knew there would be a lot of work involved! Unfortunately, it got worse from here......

    Attachment 120273Attachment 120274Attachment 120275Attachment 120276Attachment 120277Attachment 120278
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    02:41 PM
    Thread Starter
    Further examination revealed some serious cracks on both sides emanating from the trigger guard. Based on that alone, I recommended to my friend that the rifle not be restored to shooting condition. He then asked that it be cleaned and refurbished to a point that it could be a good looking wall-hanger....and it got worse....

    Attachment 120279

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    02:41 PM
    Thread Starter
    I started to work on the barrel blockage and after some serious probing, the debris started falling out. After it was cleaned, I could see that it had rifling. The bolt had both forward lugs so I knew this wasn't a converted training rifle....but then I removed the action/barrel from the stock....

    Attachment 120280

    I'm not sure what happened here. Knowing that Arisakaicon bolt actions are some of the strongest made, I was quite surprised to see this. Now I wonder if maybe this incident also caused the cracks near the trigger guard? Would firing a round with blockage in the barrel have caused it (and thus the debris in the barrel)?

  6. #4
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    02:41 PM
    Thread Starter
    While the story didn't end the way the owner would have wanted it to with an operable WW2 rifle, he did end up with a pretty nice wall hanger! It took a week's worth of work, a whole lot of Hoppes solvent, Hoppes oil, RLO and CLP, not to mention a couple rolls of paper towels, but you can still enjoy the feel of this rifle when you put it to your shoulder.

    Attachment 120281Attachment 120282

  7. The Following 2 Members Say Thank You to Singer B For This Useful Post:


  8. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    12:41 PM
    The cut in the bottom of the chamber looks to have been from a torch and then the slag ground off after. Final finish with a file or machine paper. The cracks in the small of the butt could just be from it being mistreated. Was the grease Vaseline?
    Regards, Jim

  9. Thank You to browningautorifle For This Useful Post:


  10. #6
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    02:41 PM
    Thread Starter
    Quote Originally Posted by browningautorifleicon View Post
    The cut in the bottom of the chamber looks to have been from a torch and then the slag ground off after. Final finish with a file or machine paper. The cracks in the small of the butt could just be from it being mistreated. Was the grease Vaseline?
    That is just oil that I was using to soak into the rust to work it loose. I've never seen a torch cut so I would defer to you. It's too bad because the bolt number matches the number on the bottom of the barrel/receiver.

  11. #7
    Legacy Member J-ROD's Avatar
    Join Date
    Jan 2021
    Last On
    Today @ 02:43 PM
    Location
    Indiana
    Posts
    85
    Real Name
    Jason
    Local Date
    03-28-2024
    Local Time
    02:41 PM
    Are the cuts in the receiver or just the barrel/chamber area? Maybe a candidate for a new barrel so she can bark again?

  12. #8
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    02:41 PM
    Thread Starter
    Quote Originally Posted by J-ROD View Post
    Are the cuts in the receiver or just the barrel/chamber area? Maybe a candidate for a new barrel so she can bark again?
    That's a good suggestion, but it would be cheaper to find a fully functional rifle. Arisakaicon part prices are really high.

  13. Thank You to Singer B For This Useful Post:


  14. #9
    Legacy Member J-ROD's Avatar
    Join Date
    Jan 2021
    Last On
    Today @ 02:43 PM
    Location
    Indiana
    Posts
    85
    Real Name
    Jason
    Local Date
    03-28-2024
    Local Time
    02:41 PM
    You’d be surprised on what a barrel costs...I’ve seen many go real cheap. Most people are looking for stocks, handguards, screws, bolts, etc...you can probably get a barrel (or barreled action) for under $100. If you have the ability to swap it yourself, it wouldn’t cost much.

    Put out a WTB Type 38 barrel here or look on eBay, gunbroker, or go over to gunboards.com in the Japaneseicon section. You’ll get one.

  15. #10
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    Yesterday @ 04:14 PM
    Location
    Desert Hot Springs, California
    Posts
    1,053
    Real Name
    Walt Meyer
    Local Date
    03-28-2024
    Local Time
    02:41 PM
    Thread Starter
    Quote Originally Posted by J-ROD View Post
    You’d be surprised on what a barrel costs...I’ve seen many go real cheap. Most people are looking for stocks, handguards, screws, bolts, etc...you can probably get a barrel (or barreled action) for under $100. If you have the ability to swap it yourself, it wouldn’t cost much.

    Put out a WTB Type 38 barrel here or look on eBay, gunbroker, or go over to gunboards.com in the Japaneseicon section. You’ll get one.
    That could work, only issue we would still need a stock. Cracks on both sides are pretty bad.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. What happened!?
    By LesPaui+sg=win in forum Ammunition and Reloading for Old Milsurps
    Replies: 34
    Last Post: 04-17-2017, 10:58 PM
  2. Well, it happened again!!!
    By John Holbrook in forum 1911/1911A1 Service Pistol
    Replies: 4
    Last Post: 10-26-2011, 06:03 AM
  3. Only in Pa. In Fl. this would not have happened.
    By A. F Medic in forum The Watering Hole OT (Off Topic) Forum
    Replies: 26
    Last Post: 03-31-2010, 08:16 PM
  4. Whatever happened to...........
    By Emri in forum The Watering Hole OT (Off Topic) Forum
    Replies: 0
    Last Post: 11-01-2009, 08:18 PM
  5. What happened after FTR.
    By Butch Parker in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 10-19-2007, 06:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks