+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: RA 1903 Rifle with type 11 A3 stock?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Freestateguy's Avatar
    Join Date
    Nov 2021
    Last On
    03-10-2022 @ 11:30 PM
    Location
    Boise, ID
    Posts
    17
    Real Name
    Tim
    Local Date
    03-28-2024
    Local Time
    11:56 PM

    RA 1903 Rifle with type 11 A3 stock?

    Hello all,
    So I am cleaning up and data sheeting a pretty nice RA 1903 I have had for some time. Serial # 3143504 DOM 6-42. Receiver serial and barrel date are to the same month. All milled with the exception of the butt plate which is stamped and parked. Bolt body is SC {"2" and punched on the root}. I believe the extractor, collar and cutoff are also SC. Serrated Trigger and Sear are S marked which I believe to be SA. Rear sight is "G" marked {Gotham?}. Everything else is R marked. No rebuild cartouches are present. I have been told this rifle would qualify as a "Modified" 1903. I believe the serial number is in the correct range. I know that some of you reject the term "modified" and using "type" to describe these stocks. That being said, after all of that here is my question: My Rifle has a type 11 1903A3 stock with recoil pins and is cut for a hand guard clip. Cartouches include RA, cross cannons and boxed FJA with a single non serifed circle P on the wrist. High Hump hand guard with sight groove. I have been down the rabbit hole on the stock thing and I know that many say that stock should never ever be on a production 1903 and I see others disagree. I am not an expert but I do know that in 1942 things were moving fast and these A3 stocks did exist. Its obvious my rifle received some non RA parts along the way but my main concern is the stock. Do we think that rifle could have received that stock at the USGI armory level and can I call it modified or {transitional?} See the pics. Thanks for your time-
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Attached Thumbnails Click image for larger version

Name:	Capture1.PNG‎
Views:	344
Size:	456.2 KB
ID:	122356   Click image for larger version

Name:	Capture2.PNG‎
Views:	314
Size:	599.4 KB
ID:	122357   Click image for larger version

Name:	Capture3.PNG‎
Views:	311
Size:	696.0 KB
ID:	122358   Click image for larger version

Name:	Capture4.PNG‎
Views:	317
Size:	674.2 KB
ID:	122359   Click image for larger version

Name:	Capture5.PNG‎
Views:	290
Size:	704.2 KB
ID:	122360   Click image for larger version

Name:	Capture6.PNG‎
Views:	185
Size:	678.0 KB
ID:	122361  
    Last edited by Freestateguy; 12-22-2021 at 05:10 PM.

  2. The Following 2 Members Say Thank You to Freestateguy For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member 1903Collector's Avatar
    Join Date
    Dec 2012
    Last On
    03-14-2024 @ 05:19 PM
    Location
    3rd Rock from the Sun, northern half of the western hemisphere, USA, Texas, Highland Village
    Posts
    184
    Real Name
    David Minick
    Local Date
    03-29-2024
    Local Time
    01:56 AM
    Quote Originally Posted by Freestateguy View Post
    Hello all,
    So I am cleaning up and data sheeting a pretty nice RA 1903 I have had for some time. Serial # 3143504 DOM 6-42. Receiver serial and barrel date are to the same month. All milled with the exception of the butt plate which is stamped and parked. Bolt body is SC {"2" and punched on the root}. I believe the extractor, collar and cutoff are also SC. Serrated Trigger and Sear are S marked which I believe to be SA. Rear sight is "G" marked {Gotham?}. Everything else is R marked. No rebuild cartouches are present. I have been told this rifle would qualify as a "Modified" 1903. I believe the serial number is in the correct range. I know that some of you reject the term "modified" and using "type" to describe these stocks. That being said, after all of that here is my question: My Rifle has a type 11 1903A3 stock with recoil pins and is cut for a hand guard clip. Cartouches include RA, cross cannons and boxed FJA with a single non serifed circle P on the wrist. High Hump hand guard with sight groove. I have been down the rabbit hole on the stock thing and I know that many say that stock should never ever be on a production 1903 and I see others disagree. I am not an expert but I do know that in 1942 things were moving fast and these A3 stocks did exist. Its obvious my rifle received some non RA parts along the way but my main concern is the stock. Do we think that rifle could have received that stock at the USGI armory level and can I call it modified or {transitional?} See the pics. Thanks for your time-
    Great pics!

    The stock is CORRECT for that SN! A3 S-Stocks stocks were introduced early-ish 1942 and there was mixed use until depletion of the older stocks. Early RA S-Stocks temporarily used reinforcement pins instead of reinforcement bolts as part of the cost reduction efforts that ultimately resulted in the A3 series rifles, until they realized they were not strong enough to prevent splitting due to recoil. Some of those stocks were even refurbished by removing the pins and installing bolts. I used to look down my nose on pin reinforced stocks until I realized they were getting a bit scarce AND were a very visible aspect of the '03 history.

    The 1942 RA M1903 rifles were in fact ALL designated M1903A1 (modified) Springfield rifles (I always refer to them as M1903A1(m).) Only the 1941 RA '03 Springfields were called M1903A1. They had an RA 1941 barrel, old style rear sight body with the lightening cuts, and even finger grooved '03 S-Stocks.

    So, find an RA milled smooth butt plate, double check the correctness of the bolt parts, double check the trigger/sear (I could be wrong, but I dont think they used serrated triggers and most of not all were marked R unless they were NOS from Rock Island that came with the RI manufacturing equipment, NOS inventory and WIP parts and 200000 stock blanks when RA contracted to use them for WWII '03 production), and double check the handguard type for correctness, and you are good to go!

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member Freestateguy's Avatar
    Join Date
    Nov 2021
    Last On
    03-10-2022 @ 11:30 PM
    Location
    Boise, ID
    Posts
    17
    Real Name
    Tim
    Local Date
    03-28-2024
    Local Time
    11:56 PM
    Thread Starter
    Thanks for the info and advice 1903!
    It's very helpful and welcome
    I have an early milled smooth buttplate on a later 03 that can use the checkered stamped one in the pics
    I'll start there

  7. #4
    Legacy Member m1903rifle's Avatar
    Join Date
    Mar 2009
    Last On
    03-04-2024 @ 02:45 PM
    Location
    Knoxville,TN
    Age
    79
    Posts
    376
    Local Date
    03-29-2024
    Local Time
    01:56 AM
    Where is your reference for calling the early Remington M1903 rifles M1903A1? I was always under the impression that only rifles that had the "C" (full pistol grip) stock were called M1903A1 rifles.

  8. #5
    Legacy Member 1903Collector's Avatar
    Join Date
    Dec 2012
    Last On
    03-14-2024 @ 05:19 PM
    Location
    3rd Rock from the Sun, northern half of the western hemisphere, USA, Texas, Highland Village
    Posts
    184
    Real Name
    David Minick
    Local Date
    03-29-2024
    Local Time
    01:56 AM
    Quote Originally Posted by m1903rifle View Post
    Where is your reference for calling the early Remington M1903 rifles M1903A1? I was always under the impression that only rifles that had the "C" (full pistol grip) stock were called M1903A1 rifles.
    You are quite right. I stand corrected. I was confusing the 1903A1 rifle with the NM1903 rifles which were Calibre .30 M1906 model 1903 rifles (not M1903 or M1903A1 as I mistakenly stated) stocked with an S-Stock until 1929 when the type 8 C-Stock was used for the NM1903A1 rifles (NM rifles being both Calibre .30 M1906 model 1903 till 1928 and 1903A1 rifles 1928 - 1939). As you pointed out, the first 1903A1 rifles started in 1928 (approved in 1927). HOWEVER, it is my understanding that the first 1903A1 rifles were still using S-Stocks until the inventory was depleted and that the C-Stocks were primarily used on NM rifles for at least the first year and SOME used for 1903 service rifle rebuild and repair.

    Though I am a little unclear about this next bit, I understood that assembly of service rifles at SA ended in 1927, and though assembly of M1903 .30-calibre rifles at SA did resumed in 1936 thru 1941 they were not service rifles but sold only thru the DCM. Now, does that means that all 1903A1 rifles were either NM or DCM and none were service rifles!!??!?

    I dont know when I got in the habit of calling the 1941 RA rifles M1903A1 and post 1941 RA rifles M1903A1 (modified), but I am gratified to finally be disabused of that error. I am also still unclear when the M1903 came in use. Ive seen "M1903" references made to early Calibre .30 M1906 model 1903 rifles as well as the 1941 RA M1903 and 1942 - 1943 RA M1903 (modified) rifles. So it might be so that I have been adding an M in front of the Calibre .30 M1906 model 1903 rifle designation that was also incorrect, but on this I am no longer certain. Funny how the memory tends to blend things together over time and mental images, so clear, no longer as accurate as they once were!

    So, to clarify the record, contrary to my earlier comments the 1941 and 1942 - 1943 RA rifles were called M1903 and M1903 (modified) respectively and despite the C-Stock being approved for the RA M1903 I think they were all mounted with S-Stocks until the '03 Scant stocks were available and even then I do not recall whether they were in service rifle production or just field and armory replacement stocks.

  9. #6
    Legacy Member martin08's Avatar
    Join Date
    Jul 2015
    Last On
    03-27-2024 @ 08:57 PM
    Location
    Maine
    Posts
    323
    Local Date
    03-29-2024
    Local Time
    02:56 AM
    With the gun entirely rebuilt, any stock is possible to be found with the barreled action.

  10. #7
    Legacy Member Freestateguy's Avatar
    Join Date
    Nov 2021
    Last On
    03-10-2022 @ 11:30 PM
    Location
    Boise, ID
    Posts
    17
    Real Name
    Tim
    Local Date
    03-28-2024
    Local Time
    11:56 PM
    Thread Starter
    Well, looks like I was a little too eager to hear the news I was looking for
    I think Martin08 likely has it nailed

  11. #8
    Legacy Member John Wyatt's Avatar
    Join Date
    Mar 2009
    Last On
    05-04-2023 @ 10:16 PM
    Posts
    76
    Local Date
    03-29-2024
    Local Time
    01:56 AM
    A 1903A3 stock would not be correct for the OP's rifle.

  12. Thank You to John Wyatt For This Useful Post:


  13. #9
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 12:38 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,152
    Real Name
    chuck
    Local Date
    03-29-2024
    Local Time
    12:56 AM
    correct stock for the OPs rifle would be a straight grip stock, no grasping grooves, cross bolts marked RLB out of a box. smooth buttplate, R marked underside, all the other parts should be milled R marked as well
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  14. #10
    Legacy Member 1903Collector's Avatar
    Join Date
    Dec 2012
    Last On
    03-14-2024 @ 05:19 PM
    Location
    3rd Rock from the Sun, northern half of the western hemisphere, USA, Texas, Highland Village
    Posts
    184
    Real Name
    David Minick
    Local Date
    03-29-2024
    Local Time
    01:56 AM
    Quote Originally Posted by Chuckindenver View Post
    correct stock for the OPs rifle would be a straight grip stock, no grasping grooves, cross bolts marked RLB out of a box. smooth buttplate, R marked underside, all the other parts should be milled R marked as well
    "OPs rifle"???

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. 1903 Finger Groove Stock "S" Type
    By USMC1903 in forum WTS/WTB/WTT (Want to Sell, Buy or Trade) Forum
    Replies: 0
    Last Post: 02-17-2021, 12:48 PM
  2. Notch in right side of Type 38 Rifle and Carbine Stock?
    By butlersrangers in forum Japanese Rifles
    Replies: 5
    Last Post: 02-05-2016, 09:25 AM
  3. What type ? A heavy barrel 1903 rifle
    By Fast996 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 17
    Last Post: 11-07-2015, 01:54 PM
  4. Very Early 1903 Match type rifle with Winchester barrel
    By cplstevennorton in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 17
    Last Post: 08-09-2015, 04:00 PM
  5. 1903-A3 type C, new stock ?
    By 50of4064 in forum Gunsmithing for Old Milsurps
    Replies: 3
    Last Post: 10-28-2010, 12:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks