+ Reply to Thread
Results 1 to 10 of 10

Thread: No4 Savage bolt head question

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member billy67's Avatar
    Join Date
    Jun 2013
    Last On
    01-31-2024 @ 06:17 PM
    Location
    Vancouver Island
    Posts
    73
    Local Date
    03-28-2024
    Local Time
    05:27 AM

    No4 Savage bolt head question

    Hi,
    I have a Lee enfield no4 savage that looks unissued, unfired but the bolt head is no3 so I assume the rifle is not unissued, unfired ? lol
    In my knowledge, when a service rifle is issued from the factory for the first time, the bolt head should be no 0 ?

    thanks for your inputs !
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    02:27 AM
    This could be a rifle that has been completely refinished from an individual after restoring it. I did lots of them, they sure looked new after. Yes, #3 bolt head is at the far end of it's life... I knew a Canadianicon Ranger weapon storeman that used to put a higher number bolt head on rifles before issue to "Tighten them up a bit" without regard to their actual headspace requirement.

    Pics might help?
    Regards, Jim

  4. The Following 2 Members Say Thank You to browningautorifle For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Yesterday @ 12:49 PM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    09:27 AM
    The highest number that could be used by the factory was a number 1.

    One of Peter's epistles on the subject :

    There is a little more you might need to understand before you can appreciate the whole picture. The No4 rifle was a very precisely made piece of gear. The very fine production tolerances achievable meant that every rifle could be assembled with any parts from production within set tolerances and be correct for headspace with either a No0 or a No1 bolt head fitted. To leave the factory, that was between .064" and .068" headspace. If a rifle failed headspace in service (failed the "field" gauge at .074") Then it was sent back for repair. If it could be headspaced with the next size bolt head (either a 1 to replace a 0, or a 2 to replace a 1) it was deemed good to go. If a rifle did not pass headspace with a No2 bolt head, then it was passed up the line to the senior inspector who would apply the Gauge, Inspectors, Selected Breach Bolt. If the receiver passed the test, it could be fitted with a No3 bolt head and put back into service.
    NOTE HERE. A NO3 BOLT HEAD WAS ONLY TO BE USED ON THE SAY SO OF THE SENIOR INSPECTOR.
    If it did not pass the test, it would have been sentenced Z for return to the factory, (even if a No3 bolt head would pass headspace)
    Interestingly, I wonder how many rifles are out there with No3 bolt heads in them that the owners have fitted to keep them in heasdspace, when actually the receivers may be worn beyond reasonable limits.
    Also I wonder about the amount of rabid buying in the past of number3 bolt heads and the owners who have fitted them because their rifles failed the SAAMI spec field gauge at .070", which is a good .004" below the manufacturers spec...
    I would suggest, short of panic, anyone who has a No3 bolt head in a No4 or No5 rifle should own a .074" headspace gauge and check the rifle every couple of hundred rounds. If the hardness has gone (or becomes too thin from ongoing use) from the locking shoulders, the headspace will increase as the softer metal is extruded by the forces of firing. Checking and finding it failing with a No3 bolthead that passed a hundred rounds ago will tell you things are not right.. time to retire the rifle. NOT REPLACE THE BOLT BODY!
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  7. The Following 4 Members Say Thank You to Alan de Enfield For This Useful Post:


  8. #4
    Legacy Member billy67's Avatar
    Join Date
    Jun 2013
    Last On
    01-31-2024 @ 06:17 PM
    Location
    Vancouver Island
    Posts
    73
    Local Date
    03-28-2024
    Local Time
    05:27 AM
    Thread Starter
    Dunno how comes I had no3 in mind its in facts a no2 bolt head lol
    rifle is still pack with heavy grease and the bolt look brand new, same at everything else









  9. The Following 4 Members Say Thank You to billy67 For This Useful Post:


  10. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    02:27 AM
    Quote Originally Posted by billy67 View Post
    Dunno how comes I had no3 in mind
    Quote Originally Posted by billy67 View Post
    the bolt look brand new, same at everything else
    Don't know. Typing from memory and you likely have a few. Yes, looks about new. Whole thing...
    Regards, Jim

  11. #6
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    03-25-2024 @ 05:18 PM
    Location
    Edgefield, SC USA
    Posts
    4,038
    Local Date
    03-28-2024
    Local Time
    05:27 AM
    You can find #0,1 and 2 bolt heads on new rifles. The whole idea of the different length bolt heads to be selected for proper headspace was designed as a production expedient. #3 bolt heads were used later during FTR to get the last life out of well used rifles but you wouldn't see them as new from the factory. Your rifle looks legit and excellent. When you find them with the Dulite bluing in that condition, you know that they weren't used much. It wasn't the most durable finish in the small arms world.

  12. Thank You to Brian Dick For This Useful Post:


  13. #7
    Advisory Panel Lee Enfield's Avatar
    Join Date
    Oct 2006
    Last On
    03-16-2024 @ 12:24 PM
    Location
    out there
    Posts
    1,820
    Local Date
    03-28-2024
    Local Time
    03:27 AM
    I think that everyone forgets that during the war these things were expected to have a lifespan measured in weeks.

    I have a Savage in the original shipping box - i've never looked at the bolt, maybe I should to make sure it meets the "criterion".

  14. #8
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    02:27 AM
    Quote Originally Posted by Lee Enfield View Post
    a lifespan measured in weeks
    I thought the service lifespan of a Sten or Number 4 rifle was more like 70 hours in action? Predicted...
    Regards, Jim

  15. #9
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Yesterday @ 01:25 PM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-28-2024
    Local Time
    10:27 AM
    The pointlessness of tightening up a rimmed round like .303 Jim, all he was doing is putting extra pressure on the rim....
    .303, helping Englishmen express their feelings since 1889

  16. Thank You to mrclark303 For This Useful Post:


  17. #10
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    02:27 AM
    Quote Originally Posted by mrclark303 View Post
    pointlessness of tightening up a rimmed round
    Agreed, he had no idea what was actually goin on.
    Regards, Jim

+ Reply to Thread

Similar Threads

  1. L42A1 bolt head question
    By gundoc2112 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 24
    Last Post: 01-18-2017, 08:44 AM
  2. French Berthier Bolt Head Check and Extractor Removal Question
    By jmoore in forum Milsurps General Discussion Forum
    Replies: 5
    Last Post: 07-19-2016, 02:45 AM
  3. Fitting a new bolt head (different question)
    By logandiana in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 07-07-2014, 04:56 PM
  4. Query -Savage Bolt head(2) cutting into action at front lower corner on locking??????
    By jss in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 12-11-2011, 03:09 PM
  5. Bolt Release lever or do you rotate the bolt head?
    By Williamb in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 12
    Last Post: 06-05-2009, 01:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks