+ Reply to Thread
Page 1 of 8 1 2 3 ... LastLast
Results 1 to 10 of 77

Thread: 1918 T-Gewehr Bullets

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member rescuerandy2's Avatar
    Join Date
    Jul 2012
    Last On
    03-26-2024 @ 07:56 PM
    Location
    Miami, FL
    Posts
    291
    Local Date
    03-28-2024
    Local Time
    04:51 AM

    1918 T-Gewehr Bullets

    Good Afternoon,

    I am again toying with purchasing and then shooting the TG. Looks like cases and dies are available but the bullets are the issue. Anyone know a shop that can fabricate them or already has do such. Thanks, Randy
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    10:51 AM
    Your chances of finding anything „off the shelf“ are slim, but I wish you luck!

    Have you considered using hard-cast bullets? Getting a mould made to your specification would not be a problem. But buying jacketed bullets made to order will be a bank-breaker, as you would effectively have to order a lifetime‘s supply in one lot to bring down the unit cost and to ensure that you still have supplies in a couple of years time.


    BTW, I once met a guy who uses home-made bullets for his BMG50 - also an expensive taste in ammo! He reforms cartridge cases (45-70, I seem to recall) and fills them with lead to create a bullet with a nearly-complete jacket but with a bare lead nose. If you have the time, that seems like an interesting possibility.

    However you load it, if you do acquire a T-Gewehr, please tell us all about it!

    Patrick
    Last edited by Patrick Chadwick; 01-23-2022 at 03:54 AM.

  4. Thank You to Patrick Chadwick For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member rescuerandy2's Avatar
    Join Date
    Jul 2012
    Last On
    03-26-2024 @ 07:56 PM
    Location
    Miami, FL
    Posts
    291
    Local Date
    03-28-2024
    Local Time
    04:51 AM
    Thread Starter
    Good Morning Patrick,

    Yes, this is going to be perhaps my greatest endeavor at a resurrection. The simplest, and perhaps the cheapest, answer seems to be a machinist who can turn brass rods into solid bullets. I have tried several shops and they were No-go. With the T-Gewehr at .525, I am trying to get those folks to just move up their 50BMG bullets just a bit to help me out.

    While scanning the collector websites, I read references to folks discussing group buys for brass and bullets from Germanyicon. When PMed they seem to be off line. Thanks, Randy

  7. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:51 AM
    I agree with Patrick and was thinking about it yesterday. I'd cast as well, after you get a mold cut it would last forever. Steel block of course...and make it about a three grease groove bullet. I wouldn't try to copy the boat tail of the original bullet though if I was casting. Make a size die as well and top punch...
    Regards, Jim

  8. #5
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    10:51 AM

    It's doable

    An example of what would be feasible:

    Over here in Mauserland, the Hensel company has in their online list a steel mold for a 700 grain bullet with diameter 0.515". The T-Gewehr bullet was about 800 gn with diameter 13.2mm 0.520". Hensel make their molds with CNC cutting equipment So cutting the 0.515" to 0.520-0.521" (maybe add a thou for an unjacketed lead bullet?) just means dialling in a slightly different dimension in the CNC file.

    I have no connection with Hensel, other than as a very satisfied user - when I bought my Pedersoli Gibbs (nominal cal. 0.451") they cut a "451" mold to fit the actual bore with a bullet diameter of 0.4495" when using the specified 3% tin-lead alloy. A perfect "as-cast" fit! Yes, they will adjust the mold to allow for the shrinkage of your particular alloy. Define your alloy and slug the bore, and Hensel will make a mold to fit.

    The extra diameter would increase the cast weight to about 715gn. Enough to get the T-Gewehr "feeling" in your shoulder, I think!
    If you are a perfectionist and insist on the full 800gn, Hensel will surely do it, but there is likely to be a surcharge for the longer than standard mold blocks (i.e. a bit more material and a bit more twiddling of the CNC file).

    There are surely specialists on your side of the pond who can do the same.

    BTW, I hope you have the book by Wolfgang Kern "Das Tankgewehr Mauser M1918"**. If not, get it and read it before buying anything.

    Good luck - and don't forget the photos if you do get a T-Gewehr!

    Patrick

    **ISBN 3-933481-06-6 - A dimensioned original Mauser drawing of the T-Gewehr cartridge is on P. 108
    Last edited by Patrick Chadwick; 01-24-2022 at 05:01 AM. Reason: typo after typo after tpyo

  9. #6
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    10:51 AM
    Note re. bullet diameter.

    I see that you quoted the T-Gewehr bullet as 0.525" diameter. But the Mauser drawing gives it as 13.2mm (=0.5196mm). With a groove diameter of 13.28 = 0.5228".
    In other words, the bullet was quite clearly smaller than the groove diameter Do not fall into the possibly disastrous trap of assuming that the bullet had groove diameter!
    0.525" = 13.335mm. That would be seriously oversize for the T-Gewehr.

    Be very, very careful converting between inches and mm.
    Last edited by Patrick Chadwick; 01-23-2022 at 05:04 PM.

  10. #7
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Yesterday @ 08:56 PM
    Location
    Sault Ste. Marie, ON
    Posts
    1,257
    Real Name
    A.N.
    Local Date
    03-28-2024
    Local Time
    04:51 AM
    I would recommend turning them as the best way for simplicity sake as well as cheapest considering how much you are likely going to shoot it, though getting a custom press die for copper jackets then casting lead into it and pressing it to size would also work. It all depends on what exactly your looking for.

    Any shop with a CNC lathe could likely pump out some brass bullets quickly, the only thing being they might not like the idea of making bullets as to the potential liability of it (i.e. a couple thou can make a big difference in pressure). These bullets would also be lighter than the originals for the same length so that is also a factor.

  11. #8
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:05 PM
    Location
    Victoria BC
    Posts
    29,836
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    01:51 AM
    Quote Originally Posted by rescuerandy2 View Post
    With the T-Gewehr at .525
    I have two cartridges here and one of them comes apart by hand. The bullet is exactly .524" no matter how many times you measure or where around it. Not oval or squeezed nor is it fired.
    Regards, Jim

  12. #9
    Legacy Member rescuerandy2's Avatar
    Join Date
    Jul 2012
    Last On
    03-26-2024 @ 07:56 PM
    Location
    Miami, FL
    Posts
    291
    Local Date
    03-28-2024
    Local Time
    04:51 AM
    Thread Starter
    Good Evening All,

    I have sent a request to a brass smith that I have used to make barrel bands for my older rifles/muskets. Not sure is he will take this project on as he is in CA and might have the same concerns stated by Eaglelord17. Attached are the dimensions I sent to him. There is an email out to a bookseller for Kern's "Das Tankgewehr Mauser M1918." Thanks, Randy


  13. #10
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    10:51 AM
    Re. Bullet diameter: I can only repeat what appears on just about every second page of the Lyman manual - „Slug your bore and size accordingly“

    On rifles that are more than a century old, one-time manufacturing dimensions must be treated as guidelines, not guarantees!
    Last edited by Patrick Chadwick; 01-24-2022 at 05:09 AM.

+ Reply to Thread
Page 1 of 8 1 2 3 ... LastLast

Similar Threads

  1. My Gewehr 98
    By Ovidio in forum Mauser Rifles
    Replies: 32
    Last Post: 11-12-2019, 01:49 PM
  2. Got the Gewehr 88/05 out!
    By Eaglelord17 in forum Range Reports - Show us how good you are!
    Replies: 10
    Last Post: 10-06-2019, 02:33 AM
  3. First Gewehr 43
    By daytonlawvol in forum Milsurps General Discussion Forum
    Replies: 3
    Last Post: 02-19-2017, 03:03 PM
  4. New (to me) Gewehr 88/05
    By Eaglelord17 in forum Milsurps General Discussion Forum
    Replies: 0
    Last Post: 09-18-2016, 06:45 PM
  5. Gewehr Mod 98
    By Treeman in forum Mauser Rifles
    Replies: 10
    Last Post: 02-09-2011, 07:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks