+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: 1898 Springfield Krag Rear Sight

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member mike webb's Avatar
    Join Date
    Mar 2009
    Last On
    07-10-2023 @ 10:30 PM
    Location
    New Brunswick, Canada
    Posts
    181
    Local Date
    03-29-2024
    Local Time
    11:28 AM

    1898 Springfield Krag Rear Sight

    I have a decent 98 Kragicon that has been stripped of its rear sight including the base. Will the hole centers of other Krags rear sights mate up with the holes or do I need one specifically for an 1898? I have read there were several different rear sights. Unusual when the production time span was so short.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-29-2024
    Local Time
    10:28 AM
    All U.S. Kragicon rifles and carbines (as well as sight models) have the same hole spacing.

    The various Krag rear-sight models require specific handguard hole-openings and mounting screws.

    If your Krag has a handguard, a photo of the rear-sight opening would allow identification of the sight model that you need.

    By the early 1900's, only the model 1901 and model 1902 Krag sights were being used, when rifles were being arsenal 'refurbished'.

    Attached:

    Examples of a 1901 and 1902 Krag rear sight, with correct handguard for the sight model. Also, a handguard guide done by Tom Pearce for the Krag Collectors Association Forum.

    Last edited by butlersrangers; 03-04-2022 at 09:31 AM.

  4. Thank You to butlersrangers For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member mike webb's Avatar
    Join Date
    Mar 2009
    Last On
    07-10-2023 @ 10:30 PM
    Location
    New Brunswick, Canada
    Posts
    181
    Local Date
    03-29-2024
    Local Time
    11:28 AM
    Thread Starter
    Thanks for the quick reply. My rifle is just a cut down rifle sporter, nothing special though it is in really good shape. No handguard present. For some reason sight is gone. First Kragicon I have owned, really nice workmanship and metal finish. The single locking lug makes for a super smooth action as well. At first I thought it was a carbine but it has a front sight on a barrel band so I figure cut down rifle. Too bad as 1898 carbines are quite scarce from what I can learn, only 5002 made if what I read online is correct. American Krag parts are hard to come by here in Canadaicon. Would a Danishicon Krag handguard interchange? I'm thinking probably not.

  7. #4
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-29-2024
    Local Time
    10:28 AM
    Mike - Danishicon and Norwegianicon handguards are even rarer than U.S. ones and will not work on a U.S. Kragicon.

    Since your rifle's stock and barrel were cut-down for 'Hunting', there is little need to go to the great expense of adding a handguard. A 1902 or 1901 rear-sight looks fine on an altered Krag without the handguard.

    (Possibly your 'sporter' Krag once had a Pacific, Redfield, or Leroy Rice "No-Drill" peep sight on it, that resulted in the removal of the barrel sight)?

    Does your Krag have a magazine cut-off lever in place on the left-side of the receiver?
    If the cut-off lever has been removed, it is possible a Pacific or Redield 'no-drill' receiver sight was once used on a 'cut-down' Krag.

    Your Canadianicon laws make it a lot trickier to get a sight that is often available on eBay in the U.S.

    FWIW - I like the 1902 sight on 'cut-down' Krag rifles. It works well at woods distances (50 & 100 yards) and is adjustable for windage.

    Last edited by butlersrangers; 03-04-2022 at 10:31 AM.

  8. The Following 4 Members Say Thank You to butlersrangers For This Useful Post:


  9. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 09:31 AM
    Location
    Victoria BC
    Posts
    29,839
    Real Name
    Jim
    Local Date
    03-29-2024
    Local Time
    07:28 AM
    Quote Originally Posted by mike webb View Post
    For some reason sight is gone
    As you point out Kragicon parts are unavailable here in Canadaicon, your rear sight was probably salvaged and sold for what would have been more than the sporter Krag's value.
    Regards, Jim

  10. #6
    Legacy Member mike webb's Avatar
    Join Date
    Mar 2009
    Last On
    07-10-2023 @ 10:30 PM
    Location
    New Brunswick, Canada
    Posts
    181
    Local Date
    03-29-2024
    Local Time
    11:28 AM
    Thread Starter
    Yes, mag cuttoff is in fact gone as well. I guess being as the barrel has screw holes drilled and tapped there is lots of meat for a 3/8 inch dovetail. Have seen a few online with Winchestery looking rear sights mounted.

  11. #7
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-29-2024
    Local Time
    10:28 AM
    Well it smells to me that it was set-up to wear one of these!

    The Redfield and Pacific 'no-drill' receiver sights for the Kragicon made use of the 'magazine cut-off hole' for mounting.

    (btw - dovetailing the barrel is, in my humble opinion, a poor solution. Other sight solutions may materialize).

    FYI - The barrel's threaded holes for the Krag rear-sight, if still original, are .156" X 30 tpi.

    Last edited by butlersrangers; 03-04-2022 at 01:51 PM.

  12. Thank You to butlersrangers For This Useful Post:


  13. #8
    Legacy Member mike webb's Avatar
    Join Date
    Mar 2009
    Last On
    07-10-2023 @ 10:30 PM
    Location
    New Brunswick, Canada
    Posts
    181
    Local Date
    03-29-2024
    Local Time
    11:28 AM
    Thread Starter
    Managed to pick up an 1892 rear sight for decent investment. Altough it is not correct it will still shoot good.

  14. #9
    Contributing Member ssgross's Avatar
    Join Date
    Jan 2020
    Last On
    Today @ 09:22 AM
    Location
    Virginia
    Posts
    1,517
    Local Date
    03-29-2024
    Local Time
    10:28 AM
    It may also be worth noting that, although the hole spacing and threads are the same on all sight models, the screw length and head shape are not.

  15. Thank You to ssgross For This Useful Post:


  16. #10
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    03-26-2024 @ 09:38 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    03-29-2024
    Local Time
    10:28 AM
    FWIW - The model 1892 Kragicon rear-sight uses the same screw combination as the model 1896 sight.
    The rear screw is short with a very thin head. The front screw is long with a thick head.


    Last edited by butlersrangers; 03-05-2022 at 12:44 AM.

  17. Thank You to butlersrangers For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. U S Springfield 1898 .30-40 Krag Carbine??
    By usabaker in forum Krag Rifles
    Replies: 7
    Last Post: 05-10-2018, 07:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks