+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 41

Thread: Ross Project Rifle

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    02:53 PM

    Ross Project Rifle

    I've wanted one of these for years and found one today I couldn't pass up for the price, $249.00.

    Of course I didn't have my manuals with me so I sat there in the store watching videos for half an hour, gave Mike a call and he talked me into it.

    It appears to have an original Ross barrel on it but it doesn't seat right, almost like it was set back a half inch. Condition of the barrel bore is outstanding so no idea why they would do this. Length is 27 1/2" as measured with a rod against the bolt head. We guestimated it at 28" at the gunshop which is why I thought it was good. Index marks are good but the proofs are cut off. It also looks like the sights were moved forward a half inch on the barrel. The barrel has been removed, there are score marks on it. Stock looks like a standard sporterized cut down forearm. All parts are there except the small rear top hand guard, the front band, the sight hood and the cut off portion of the stock. the stock has been sanded to death and has a crack on one side most likely due to being so thin there.

    I can't find any photos on the web but did find two rifles identified as US property that were listed as 27 1/2" barrels. I can't get the barrel to come off by hand. May try more over the weekend but pretty positive it is a Ross barrel, just can't see how they re-indexed it, it has a rather unique attachment system. It does have the rear sight that seems standard on the US rifles and it is in 303 or at least a 303 cartridge fits. Haven't decided what I want to do with it yet. As long as it's safe as is, I'll probably keep it, clean it up and watch for the next 10 years for a bayonet lug/front band and then carve a stock extension for it. Bore is bright with crisp rifling so it should at least be a good shooter.





    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel tiriaq's Avatar
    Join Date
    Oct 2006
    Last On
    Today @ 01:01 PM
    Location
    Central Ontario
    Age
    78
    Posts
    1,074
    Local Date
    03-28-2024
    Local Time
    02:53 PM
    The barrel threads are left hand. After a hundred odd years, it might be necessary to clamp the barrel and receiver as would normally be done to break the barrel loose. I'll have to check, but I recall a reference in The Ross Rifle Story to some barrels being set back.
    Looks as if the stock could be spliced under the band to restore it to original appearance. Nosecaps can be had, and I believe repro handguards have been carved.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member usabaker's Avatar
    Join Date
    May 2017
    Last On
    Today @ 12:50 PM
    Location
    San Deigo, CA
    Posts
    1,733
    Real Name
    Bill Baker
    Local Date
    03-28-2024
    Local Time
    11:53 AM
    Good looking rifle and great price!
    Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
    " Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "

  6. #4
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    11:53 AM
    The barrel was no doubt set back when the chamber was re-cut post-WWI. That was done to eliminate the grossly over-sized chamber that resulted from reaming out they were all given in the hopes that would reduce the problems caused by poor quality ammo, and let it be admitted, the less than optimal primary extraction inherent in the design.
    Last edited by Surpmil; 10-21-2022 at 01:09 PM. Reason: Typo
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  7. #5
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    02:53 PM
    Thread Starter
    So this barrel set back is normal and nothing to worry about? I confirmed the position of the hand guard, you can see wear marks from the two positions of the barrel. That had me a bit concerned which is why I wanted to get the barrel off, to make sure some bubba didn't do it. Looks like a slow restore it will be. With the clues you suggested I was able to find other references which explain the extra holes, they are from the sight being moved after the set back. I suspected that.

    I'll probably leave the barrel alone then, no need to take it out I started cleaning the metal late today. It's in pretty decent condition, some light rust here and there but not the pitting type. The stock is going to be more challenging. Considering the possibility of laminating wood on both sides of the receiver area as they sanded those areas pretty flat. The screws stick out an 8th inch and they should be set into the wood. Would that be possible? Need a good color match.

  8. #6
    Legacy Member Snow Dog's Avatar
    Join Date
    Feb 2008
    Last On
    03-25-2024 @ 12:05 PM
    Posts
    14
    Local Date
    03-28-2024
    Local Time
    02:53 PM
    Have a look here for stocks, handguards and bayonet lugs: Ross Rifle Restoration

  9. #7
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    02:53 PM
    Thread Starter
    I have it torn apart for cleaning and stock repair. Primary crack is now fixed. Secondary small cracks are being clamped now. Metal is all cleaned, some finish loss and scratches here and there but no pitting. Not many markings on it. I am not going to try to remove the barrel now that I know what was done with it. As far as the stock goes, I'm going to attempt to find some matching wood and try laminating the two sides of the receiver and make an extension for the fore end and attempt to locate a bayonet lug front band. If I ever come across a better sporterized stock that hasn't been sanded to death or an actual stock that is affordably priced, I'll swap out the stock. I see the repro stocks and maybe someday I'll be willing to go that route but for now, it's a little much. I'll have to locate or make the small upper hand guard also.













    Last edited by Aragorn243; 04-17-2022 at 05:48 PM.

  10. #8
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:16 PM
    Location
    Victoria BC
    Posts
    29,838
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    11:53 AM
    Quote Originally Posted by Aragorn243 View Post
    If I ever come across a better sporterized stock that hasn't been sanded to death or an actual stock that is affordably priced, I'll swap out the stock. I see the repro stocks and maybe someday I'll be willing to go that route but for now, it's a little much.
    I can't see a cast off stock being cheap. A repro stock is at least a given, here's a place to start for all you speak of. Ross Rifle Restoration
    Regards, Jim

  11. #9
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 08:31 AM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-28-2024
    Local Time
    02:53 PM
    Thread Starter
    Already found that site Friday before I bought the rifle. $550 is way too much. If that's Canadianicon dollars, it's a little more worth considering but I wasn't able to figure that out. I decided before I bought it that wasn't going to be an option. For now, anyway. It would be nice and if I can't get this presentable any other way I may end up doing that.

    In the meantime, I discovered the trigger spring is missing a turn. Actually was able to find this and it's on order. Safety wasn't working quite right, spring was too short to hold the sear high enough to lock the firing mechanism back every time.
    Last edited by Aragorn243; 04-17-2022 at 10:04 PM.

  12. Thank You to Aragorn243 For This Useful Post:


  13. #10
    Legacy Member Snow Dog's Avatar
    Join Date
    Feb 2008
    Last On
    03-25-2024 @ 12:05 PM
    Posts
    14
    Local Date
    03-28-2024
    Local Time
    02:53 PM
    As per their web site - "All prices are in Canadianicon dollars and do not include shipping. " I think it would be worth getting a new stock. Unless you have a lot of woodworking experiece you'll be chasing your tail trying to fix years of damage, modifications and neglect. Start fresh - it'll be worth the expense in the long run, especially considering the going price of a decent example of these rifles nowadays.

+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast

Similar Threads

  1. Ross project, advice sought.
    By BurtonP in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 4
    Last Post: 08-22-2021, 08:18 PM
  2. Ross MK III Restoration Project
    By altadiver in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 4
    Last Post: 01-17-2019, 09:42 AM
  3. My Great Big MkII** Ross Rifle Project.
    By BrianLara400* in forum The Restorer's Corner
    Replies: 11
    Last Post: 02-10-2015, 03:45 AM
  4. My Great Big MkII** Ross Rifle Project.
    By BrianLara400* in forum Gunsmithing for Old Milsurps
    Replies: 0
    Last Post: 10-15-2014, 05:40 AM
  5. ROSS 1905 Sporter project
    By betamax in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 12
    Last Post: 03-09-2011, 01:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks